The M1A1 Buzz Tank

[BuzzKill]

Here is the first prototype
Anodized aluminum caps , top / bot. ,
O-ring's internally and externally to seal everything ,
Polycarbonite tubing ( bullet proof plastic ) no cracking or braking ,
filler screw hole on the side with plastic thumb screw
1.7" tall
Sorry no colors for now , the colors are made in acrylic and that is not the best material to use , I have read that they are having cracking problems ??

View attachment 54543

This is based on the Vermonster/Chaos/yzrmbsg
design from VF

thanks Guys !!!

 

[kellie]

Ohhhh I like it. How is it working?

 

[WIvapor]

What kind of cartos are you using?

 

[ukeman]

lurking... to see when it's ready.

 

[BuzzKill]

Ohhhh I like it. How is it working?

So far so good ,no leaks good flavor

What kind of cartos are you using?

all I have are Ce2R4 cartos , I have to get some more type to try , I need suggestions people please !!

lurking... to see when it's ready.

Well it will take 2-3 weeks to get the parts made so ?? I will talk to my local Machinist and see what he can do .

 

[kellie]

You should try the Fusions and the dual coils

 

[catcat]

That looks pretty spiffy. Is it used with slotted cartomizers?

 

[BuzzKill]

That looks pretty spiffy. Is it used with slotted cartomizers?

I just drilled an old one with 2 1/8" holes , I need to get some cartos to check the fit now

 

[Vermonster13]

Nice design.

 

[5cardstud]

Nice Mike, Damn nice. I like that the top and bottom don't take up so much room in the tank. As long as you stick with the 510 OD size most anything will fit but I believe the Fusion has become quite popular but for them you will need to make a tank about a quarter inch shorter to allow for the 801 base.
2 1/8th in. holes should be plenty. If you want I can send you a couple Fusions Mike, just let me know.
I also have some Mega 808s, some V2510s, some other ones I can send to you too but they all have the same OD. Just let me know and I'll stick them in the mail tomorrow.
I do love that design, Way to go Mike.

 

[BuzzKill]

Nice Mike, Damn nice. I like that the top and bottom don't take up so much room in the tank. As long as you stick with the 510 OD size most anything will fit but I believe the Fusion has become quite popular but for them you will need to make a tank about a quarter inch shorter to allow for the 801 base.
2 1/8th in. holes should be plenty. If you want I can send you a couple Fusions Mike, just let me know.
I also have some Mega 808s, some V2510s, some other ones I can send to you too but they all have the same OD. Just let me know and I'll stick them in the mail tomorrow.
I do love that design, Way to go Mike.

Send me some dead ones 5 ! that would help alot , making a shorter version is NO problem !

 

[5cardstud]

I will send them in tomorrows mail Mike.

 

[moorea]

So how much liquid will they hold and how much do you thin they will cost!

 

[BuzzKill]

So how much liquid will they hold and how much do you thin they will cost!

I have not measured the capacity but around 5-6 ml , I think they will be around $30 or so Moo , they will come with an extra side screw and 0- rings 1 sm. 1 lrg.

 

[5cardstud]

That filler port will be a good selling point. So far mines the only one I've seen with a port and it works great.
Another thing I was thinking about on a tank would be not only having orings on the inside but also having the top and bottom caps come over the outside a little with threads that threaded onto the tank. That would stop all the slipping people are getting.

 

[BuzzKill]

That filler port will be a good selling point. So far mines the only one I've seen with a port and it works great.

It is just a 4-40 thumb screw , simple !

thank Vermonster for the design !!!

 

[Vermonster13]

I've been using a filler port for a while. helps prevent leakage on refills.

 

[Modrod.]

I have not measured the capacity but around 5-6 ml , I think they will be around $30 or so Moo , they will come with an extra side screw and 0- rings 1 sm. 1 lrg.

Fork yea (as Mist would say)! Now I'll have to buy some steel CE2's when this is ready for purchase. The price sounds good to, especially since everyone else is jacking their prices up.

 

[moorea]

I have not measured the capacity but around 5-6 ml , I think they will be around $30 or so Moo , they will come with an extra side screw and 0- rings 1 sm. 1 lrg.

That all sounds good! Looking forward to buying one (or more...)

 

[BuzzKill]

Fork yea (as Mist would say)! Now I'll have to buy some steel CE2's when this is ready for purchase. The price sounds good to, especially since everyone else is jacking their prices up.

This thing should last a LONG time as well , only top quality parts being used .