[h=3]The NEW GotVapes PHOENiX™ 1.25ml Bottom Coil eGo tank 2.4-2.6ohm & 2.6-2.8ohms[/h][h=3]Starting at: $9.45[/h]Many of the features of the PHOENiX XL are the same with the tank so we are pasting that info here in part, at the bottom.
We are now carrying the NEW 1.25ml version of the Phoenix Bottom Coil Sleeved tank! The tank sleeve itself is more cosmetic than anything and is easily pulled off to reveal four air holes ringing the upper part of the metal base. Pull this tank off if you are experiencing any issues with flavor or toastiness in your vape. It is vaping awesomely for me with GREAT flavor and plenty of vapor.
Upon inspection of several of these it appears to have a nice fluffy and substantial tuft of wick emanating from the bottom coil.
========================================================== Over a year in the making Introducing...
GotVapes PHOENiX™ Bottom Coil 1.25ml TANK Cartomizer
We began collaborating on this project nearly a year ago and while we were impressed we felt it was not quite ready for prime-time. We went back and forth with the manufacturer who had close ties to the original CE2 design. They sent us samples, we tested. We gave more feedback and they improved...we are now proud to put our name on this product and we will be sure you will also be impressed.
Easy to maintain, cleanable, the PHOENiX has provided unparalleled flavor in testing. It is manufactured with a strong, durable poly plastic clear tube. Innovative base houses the bottom coil in a stainless encasement with attention to prevent leakage issues. The TANK version will hold approximately 1.25ml of juice.
What you receive with your PHOENiX 2ml TANK purchase:
- 1 PHOENiX 1.25ml bottom coil eGo TANK - 2.4-2.6 & 2.6-2.8ohms
- This has outside eGo threading so it threads where your cones normally thread.
- Drip tip
- Base cover with window
- Pen-clip style cap
- These come completely dry with no primer at all
- These will require an ego adapter on most mods, tested on our Vmax and even though it has an eGo well you will still need an ego adapter.[/i]
- FILLING: You MUST fill these in an inverted position (upside down). The design of the Phoenix is that the tight seal at the top and bottom can and will force juice out the connector if you 'force' juice in by using a syringe to plunge it in with the Phoenix upright. When you fill it inverted the air is 'forced' out ahead of the juice, keeping the vacuum. If you fill it the wrong way and experience leakage, remove the carto and wipe all juice clean from the battery, inside the batetry threading and inside the carto threading as well as wipe clean any adapter you may have been using. You can then safely resume filling in inverted position.
Last edited:
