The Official Nicoticket " Get the most from your juice thread."

Status
Not open for further replies.

Ms.Cruzer

Ultra Member
ECF Veteran
Verified Member
Oct 20, 2010
1,472
8,508
Woodland Park, CO
I bought it the istick 30w, thank you, everyone!!!

Lezlee, I appreciate you telling me I could go up to 30w, I didn't know that.

I'll be stalking the mailman next week. :D

iStick 30W by Eleaf

You're welcome. That spring loaded 510 is worth it. The 510's on the 20w have been the biggest problem area on those devices. I use an AFC to protect mine.

The 30w is rated down to .4 ohms and your Geni Mega should fit fine at 22mm.
 

penguiness

Vaping Master
ECF Veteran
Verified Member
Mar 27, 2014
5,649
33,184
Nashville, TN, USA
Thank you, Lynn! I bought the silver one, I love the look of silver. It goes down to 0.4ohms. When I get it, I'm going to have a lot of questions because I've never had something this nice except for my Reo's and I'm going to need help so I don't ruin it. I hope I don't get on anyone's nerves with my upcoming questions about wattages, etc.

:D So excited!

Ohms Law and the Steam calculator is the best tools you can have :)
 

danibanani

Ultra Member
ECF Veteran
Verified Member
Nov 2, 2014
2,060
8,418
Ohio
You're welcome. That spring loaded 510 is worth it. The 510's on the 20w have been the biggest problem area on those devices. I use an AFC to protect mine.

The 30w is rated down to .4 ohms and your Geni Mega should fit fine at 22mm.

Would you mind telling me what AFC stands for and what it means?
 

Ms.Cruzer

Ultra Member
ECF Veteran
Verified Member
Oct 20, 2010
1,472
8,508
Woodland Park, CO
Sorry, it's air flow control. It's just a piece i put in between the tank and the istick to protect those super delicate threads on the 20w.

image.jpg
 

solace.discord

Ultra Member
ECF Veteran
Verified Member
Jun 21, 2011
2,496
11,533
Southern Maine
Sorry, it's air flow control. It's just a piece i put in between the tank and the istick to protect those super delicate threads on the 20w.

View attachment 406687
that's a heck of a lot shorter than using the eGo adapter and a thread cover! thanks for the tip!
 

danibanani

Ultra Member
ECF Veteran
Verified Member
Nov 2, 2014
2,060
8,418
Ohio

Dyanne, is that an iStick 30w? I know this is probably crazy stupid, but I am really, really excited to get mine. Like, excited when I got my Reo! I'm just hoping the genitank mega with 0.8 wicks work with it.

Do you guys think I should buy some 1.2's just in case? On my Reo I am always between 0.7-0.9. Always. I'm just afraid of burning my wick up.
 

distortoblotto

Vaping Master
ECF Veteran
Verified Member
Nov 12, 2013
8,140
47,367
S.F/ Seattle
Dyanne, is that an iStick 30w? I know this is probably crazy stupid, but I am really, really excited to get mine. Like, excited when I got my Reo! I'm just hoping the genitank mega with 0.8 wicks work with it.

Do you guys think I should buy some 1.2's just in case? On my Reo I am always between 0.7-0.9. Always. I'm just afraid of burning my wick up.

Dani, What type of genny do you have? You will be just fine at 0.8. Just employ the bump up method. Start out at say 10 watts and bump up from there. At 10 watts you'll only be starting off at 3.4 volts. As to where at a full blown 30 watts will put you at 4.2 volts. Completely acceptable for the range.

EDIT;....Dani, Scratch the 30 watt, 4.2 volt line. I made an error in my calculation. 30 watts will put you at 4.9 volts as to where 22 watts will put you at just about 4.2 volts., Sorry about that.....
 
Last edited:

Grrrr

Ultra Member
ECF Veteran
Verified Member
Jan 21, 2013
1,824
5,823
54
San Francisco via Manchester U.K.
Dyanne, is that an iStick 30w? I know this is probably crazy stupid, but I am really, really excited to get mine. Like, excited when I got my Reo! I'm just hoping the genitank mega with 0.8 wicks work with it.

Do you guys think I should buy some 1.2's just in case? On my Reo I am always between 0.7-0.9. Always. I'm just afraid of burning my wick up.

As distorto said, start low and go up, adjust to taste till you hit your sweet spot.
 

danibanani

Ultra Member
ECF Veteran
Verified Member
Nov 2, 2014
2,060
8,418
Ohio
Dani, What type of genny do you have? You will be just fine at 0.8. Just employ the bump up method. Start out at say 10 watts and bump up from there. At 10 watts you'll only be starting off at 3.4 volts. As to where at a full blown 30 watts will put you at 4.2 volts. Completely acceptable for the range.

Great! I have the Mega, which holds like 3ml of juice. I am so glad you told me what wattage to use. I had no idea where to even start and I didn't want to look dumb and ask before I even got the thing. I have 5 wicks, so I'm in good shape. Thank you for explaining all of that to me.

As distorto said, start low and go up, adjust to taste till you hit your sweet spot.

Thank you, Grrrr, as always, you and distorto come to the rescue when trouble shooting. I appreciate it.
 

distortoblotto

Vaping Master
ECF Veteran
Verified Member
Nov 12, 2013
8,140
47,367
S.F/ Seattle
Great! I have the Mega, which holds like 3ml of juice. I am so glad you told me what wattage to use. I had no idea where to even start and I didn't want to look dumb and ask before I even got the thing. I have 5 wicks, so I'm in good shape. Thank you for explaining all of that to me.



Thank you, Grrrr, as always, you and distorto come to the rescue when trouble shooting. I appreciate it.

Hold on a second! Kanger Mega? Back up a bit...Beep, Beep, Beep....:laugh:

If it is indeed the Kanger Mega, The air flow is going to be your limiting factor. It is imperative to start out low and bump up. Just bump up slowly until the flavor starts to go off and then bump down a few points from there.
 
Status
Not open for further replies.

Users who are viewing this thread