THE Phoenix Line is here & up for SALE. both phoenix xl & 3ml tank version,bottom coil, 2 ohms for both

[zippersnapper]

It actually isn't about the voltage... it is about the wattage you prefer and everyone has different opinions on this...

If you know what ohms you liked on other carto's or clearo's... use that as a place to start with. Since you have a VV mod, you can always increase/decrease the voltage to find your favorite wattage no matter which ohm you select...

The following is a chart I got somewhere on this forum ... from someone I can no longer remember... It may help you

View attachment 105207

The typical Ohm rule...Low Ohm's with low voltage, High Ohm with high voltage, goes right out the window with the Phoenix XL, anyway. Typically I would vape a 2.4 Ohm around 4.0-4.3 Volts. But on a Phoenix, it burns the juice (For me anyway)

I have used on:
ego Batt-GREAT Vape
eGo 18650 MOD-Just starts to get a tiny hint of burnt taste
Buzz Pro II-Great, If cranked all the way down
Provari VV-Below 3.6 I get a E-1 error
Lava Tube-Great at 3.6 and below

I cant wait to see how the 3ml tanks act...My experience and taste will differ than everyone else, I imagine

 

[dannoman]

Forgot to mention--most orders received from here on out will go out Monday...early PO closign tomorrow and Chris won't be able to fulfill everything....

 

[dannoman]

We didn't get replenished on those sorry....

You're awesome! Just one question. Are the stardust seal ring thingys going up, or should I just check out and get those another time?

 

[VaperEd]

Thanks for the hard work fella's. Take care...

 

[Debadoo]

We didn't get replenished on those sorry....

Not a problem! I'm really excited about trying these. Thanks for letting me know. Ok, I paid, why isn't the mailman here yet?? lol

 

[Debadoo]

Thanks for the hard work fella's. Take care...

Ditto. So great of y'all to do this! Really tells me a lot about your company. And soon you'll be in Texas! Yea! lol

 

[dannoman]

I DO THINK...you guys are going to be blown away by the PHOENiX™ Top Coil...

 

[VaperEd]

What exactly do the 3ml sleeved tank replacement assemblies come with? Do they include the metal ring on the top that holds the drip tip. The way I read it it does not. Mine was stolen by elves or gremlins....

 

[zippersnapper]

Ditto. So great of y'all to do this! Really tells me a lot about your company. And soon you'll be in Texas! Yea! lol

I second that !!! Any plans for a store front? Pretty Please?

 

[Debadoo]

lol Zipper, not sure where Rosenberg is, but I say we need a store front in Bell County to get all the soldiers here vapin'! Plus, we don't have any here. lol

 

[dannoman]

We'll have pictures but its a complete unit without:

Drip tip
Metal threaded top for cap and also receptacle for drip tip
Sleeves & Cap (but thats why its a replacement!)

What exactly do the 3ml sleeved tank replacement assemblies come with? Do they include the metal ring on the top that holds the drip tip. The way I read it it does not. Mine was stolen by elves or gremlins....

 

[Debadoo]

Oh, and thanks to my fellow phoenix stalkers too for helping me out. I hate not knowin what the heck I'm doin! lol But I'll get there. Appreciate y'all a lot though. Especially because at the same moment I saw the post that they were live and clicked on them, the phone rang.......then a call beeped in, with two women that I was trying to coordinate a 4 way stamp order with. Yeah, my head was spinnin. I looked just about like zipper's avatar! lol

 

[VaperEd]

We'll have pictures but its a complete unit without:

Drip tip
Metal threaded top for cap and also receptacle for drip tip
Sleeves & Cap (but thats why its a replacement!)

Got it. Thank you for your prompt reply Danno.....

 

[badkolo]

the top coil is working incredibly, i think your all going to love these tremendously, clean from the first vape, they come with a syringe and with 2 drip tips, 1 round one and 1 whistle tip drip tip and of coarse the mouth peaces they come with which are flat.

 

[dannoman]

GotVapes 510 PHOENiX™ TOP Coil XL 1.5ml Cartomizer 2.4-2.6, 2.6-2.8ohms
$11.95

Introducing...
The GotVapes PHOENiX™ TOP Coil Cartomizer

From the makers of the Phoenix™ XL Bottom Coil cartomizer, as such it is easy to maintain, cleanable,and is manufactured with a strong, durable poly plastic clear tube.

Some features of the GotVapes PHOENiX™ XL TOP Coil:

• The PHOENiX™ XL Top Coil provides a clean taste from the start.
• Designed with same coil as the GotVapes PHOENiX™ XL Bottom Coil for unsurpassed flavor
• No wires dangling in the tube, kept discreetly hidden in place - this helps ensure no heating of juice any further than necessary
• A flat plate installed at the end of the tube A flat plate installed at the end of the tube where the air stem ENDS (it does not go all the way to the connector so you have much better leakage protection), sealing the unit 100%, sealing the unit 100%
• These come completely dry with no primer at all

What you receive with your PHOENiX XL TOP Coil purchase:

• (5) 510 PHOENiX XL TOP Coil 2.4-2.6 or 2.6-2.8 clearomizers
• Each carto somes with a flexible easy to remove mouthpiece, pleasant on the lips.
• Three drip tip/mouthpieces - one normal drip tip, one small flexi mouthpiece and one fluted whistle tip
• Fill syringe and steel tip for filling included
• GotVapes PHOENiX Top Coil presentation box designed with a different color scheme to be easily distinguished from the PHOENiX XL Bottom Coil box.

GotVapes PHOENiX™ : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more​

 

[rdsok]

I got the lower ones and I will try the higher ones next time

I actually think you will prefer the lower ohm... you will be able to get a warmer vape at a lower voltage which will help save your battery life...

 

[VaperEd]

This may have been asked earlier. Will the 3ml sleeveless Phoenix be coming out in a top coil?

 

[tidegirl]

OK, thread being unhijacked. Back to the topic at hand.

I have cleaned some of my bottom coil Phoenixes, and I have one refusing to draw in juice. Every hit is a dry hit, no bubbles after a vape. Taking a hit without firing doesn't help. The only thing that does is to squeeze the tube a bit after every vape. Now I have vaped all the juice out of it, what does it need? Just remove and replace the seal? Fiddle with the air tube? ___???

 

[Bodasafa]

Well I just ordered some of them new Top Coil Phoenix. Hoping they will replace my Stardusts. The Stardusts did me well as a first time vaper, I even have some going strong after a month! However, the flavor seems inconsistent. And strangely the clear ones I got lasting a month are out performing brand new colored ones that seem to have a burnt taste right out of the box Hoping these new Top Coils will do the trick. Normally I wait for a second run of a product till the bugs are worked out, but didn't want to wait. I'm a month in vaping, broken even vs. not buying analogs and now that I'm seeing some savings I think I can splurge. Looking for a more satisfying vape now.

I want to check out the 3ml Tank Phoenix, but I'm reading far to many posts about having to mod the wicks ect. Not quite ready for that.

 

[badkolo]

you dont need to mod the 3ml, you can though depending on your juice and how you want it to perform and all are now dry, I fill and vape and use 70/30 pg/vg juice, no pg/vg juice of any kind on the coil, no need to clean any that might of had juice on them.