The Precious PV's, smartest and smallest available!

[caesar]

I present you the smallest devices available for these battery sizes.

For details please visit: The Precious - smallest and finest mods available!




Features:
- touch sensor, senses your fingerprint not the push! (pocket safe)
- variable power based on touch surface
- no wear and tear switch, heavy duty and fail safe
- the touch sensor will outlive any button in lifespan and will always work at it's best even after a long time
- under voltage protection of the battery (cuts power at 3V)
- 510 connector
- well placed venting holes for increased security in case of disaster
- under 8 milliohm internal resistance – meaning no losses, better than a platinum plated switch (100 milliohm resistance) or conventional switches (> 100 milliohm resistance)!
- high quality nickel plated brass with satin finish (anti-slip)


The Precious - L (18650 battery)

The Precious - M (14500 battery) and The Precious - S (10440 battery)

The Precious M - size

The Precious S - size

The Precious - L can house 2 CR123A batteries for 6V vaping but we recommend to use only protected Li-Ion batteries.
Although it is designed with safety in mind and it will keep you safe, please don't use unprotected batteries.


Thank you for stopping by!
Caesar

 

[CHUCKLEHEAD]

Now thats so sweet !!!!! can't waitOut of all my mods i anticiapate this one the most! 8-o

 

[Wingrider]

By the looks of your Precious L measurement, I think my Mako is as small, or smaller then it is.

So the question is, is the Precious L really the smallest 6V device???

The Mako is 3 5/16 in and the diameter is smaller than a penny.

 

[JollyRogers]

By the looks of your Precious L measurement, I think my Mako is as small, or smaller then it is.

So the question is, is the Precious L really the smallest 6V device???

The Mako is 3 5/16 in and the diameter is smaller than a penny.

Sorry to jump in Caesar...

Which Mako do you have? The Precious L uses the big .... battery, the 18650, and is not focused on being a 6V device. It focuses on being the smallest 18650 device. The Precious L just happens to be able to do 6V also. Looking at the Mako Midi it looks to take a 14500, the Maksi uses a 14650?. Is there another model that uses the 18650? All of Caesar's mods also incorporate a touch sensor. The Precious M also uses the same 3.7V battery as the Midi... and is < 3". Not sure if it can do 6V though... But don't care, my L will be here this week!

 

[caesar]

No problem JollyRogers!

I stated: "smallest devices available for these battery sizes"
So L is using 18650, M 14500 and S 10440.
Please don't put words in my mouth!

Anyway you are comparing apples with oranges, the L can house CR123A (about 500mAh true capacity) while you are talking about CR2's (abut 250mAh true capacity) for 6V...
If you still want to compare them then it's double the capacity for almost the same size.

 

[ericscott]

How long does shiping take when u order one thanks?

 

[caesar]

Shipping takes between 10-15 days to USA.

 

[Trox.Shawn]

I ordered a Precious M, but now I am almost wishing I would have went with the Precious L. Although I already have the 14500 batteries so perhaps if I like the Precious M I will have to complete the entire family of LMS

edit: unless 2x RCR2 batteries would fit in the Precious M

 

[caesar]

I will ask you before building it if you want to change your mind! I think you will have a few days to change your mind.

M doesn't do 2xCR2's. It's as tight as a 14500 and CR2's are 15250, a little thicker.
CR2's are really not a good idea at all for vaping as they are completely underpowered (around 200mA for the best ones out there)

 

[CHUCKLEHEAD]

Hey Casear! Glad to see you around.I know you have been busy! There are other's claiming to have smaller mods But i did some research and yours are by far the smallest Can't wait to get mine.It should arrive in Ney york tomorrow hopefully

 

[Trox.Shawn]

I will ask you before building it if you want to change your mind! I think you will have a few days to change your mind.

M doesn't do 2xCR2's. It's as tight as a 14500 and CR2's are 15250, a little thicker.
CR2's are really not a good idea at all for vaping as they are completely underpowered (around 200mA for the best ones out there)

I use CR2s in my Super 6 with now issue, but I already made the switch to the L version.

 

[bssage]

I'm trying to find prices ect. I must be stupid. I cant find any info other than the specs.

Help please

Thanks
bssage

Pm me if you can. I keep losing this thread.

 

[Hoosier]

I'm trying to find prices ect. I must be stupid. I cant find any info other than the specs.

Help please

Thanks
bssage

Pm me if you can. I keep losing this thread.

Yeah, it's not real obvious. Try this link.

 

[caesar]

A few vaping videos:

(standard Joye510 atomizer with Dekang juice)

YouTube - First piece of The Precious - M

YouTube - First piece of The Precious - S

 

[caesar]

Newsflash!

This is the big juice dispenser, aimed at the hardcore user (2x18350 or 2x18500 variant).
Capacity is 9ml of juice.

YouTube - Preview / teaser of The Precious - U with juice dispenser

There will be a smaller version of the juice dispenser for the small U (2x18350 / 1x18650) that will be as thick as the Precious and will hold 3-4ml of juice.

After they are done and tested, the dispenser will migrate as an add-on to the L series. Maybe M too if there is interest.

 

[JollyRogers]

I was kind of hoping the JD was being directly developed for the L series, not a design for a U series, and then a migration over to the L series. It was one reason of buying the L...

Can you tell me, what material will the JD be made of? I am curious as to how much additional weight it will add to my L (and projected cost), when it becomes available.

I have carried my L now for a week. No spare battery, with a LR atty/cart on it, spare atty holding drip tip, spare cartomizer filled for driving, 5 ml bottle of juice for refills/dripping otherwise. It has not let me down. 18650 does the day and some. Just change battery every morning before going to work. The only detractor is the weight and occasionally firing it by accident. The brass gets warm from my body heat and holds the heat rather well! First few times I noticed this, I pulled it apart to check battery, but it was cool to touch.

Anyways, great PV Caesar, and keep up the great work and innovation.

PS: When it becomes available for the L, I would like it right off. Got a pre-order option or list?

 

[bssage]

Thanks hoosier. nice, kinda pricy but very nice.

 

[caesar]

The U will be a micro series (only a few made, never to repeat). Just putting inside all the tech I thought of up to this moment.
It is easier to build and test them made from aluminum, a little cheaper too so testing expenses won't derail the end price completely.

The L will get the dispenser but will most probably be the same sturdy workmanship and nickel plated. If you drop it, you wouldn't want an expensive piece of metal to bulge and leak.

When they come out for the L, there will be enough of them to satisfy demand.



I think that today I nailed it. For the last 8 hours I vaped this baby without refilling or doing anything other than touching the switch. No juice was lost whatsoever and atty performs top notch.
Will test it a little more and on Monday will make another few for repeatability tests.

 

[Vapor Vamp]

Newsflash!

This is the big juice dispenser, aimed at the hardcore user (2x18350 or 2x18500 variant).
Capacity is 9ml of juice.

YouTube - Preview / teaser of The Precious - U with juice dispenser

There will be a smaller version of the juice dispenser for the small U (2x18350 / 1x18650) that will be as thick as the Precious and will hold 3-4ml of juice.

After they are done and tested, the dispenser will migrate as an add-on to the L series. Maybe M too if there is interest.

SWEEEET!

Been debating back 'n' forth
whether to get a Precious-L or a Precise-18 from Super-T.

But this is the ton of bricks
that just broke the camel's back!

Eagerly awaiting feedback from the pioneers that get their
feet wet first...

 

[JollyRogers]

The U will be a micro series (only a few made, never to repeat). Just putting inside all the tech I thought of up to this moment.
It is easier to build and test them made from aluminum, a little cheaper too so testing expenses won't derail the end price completely.

The L will get the dispenser but will most probably be the same sturdy workmanship and nickel plated. If you drop it, you wouldn't want an expensive piece of metal to bulge and leak.

When they come out for the L, there will be enough of them to satisfy demand.



I think that today I nailed it. For the last 8 hours I vaped this baby without refilling or doing anything other than touching the switch. No juice was lost whatsoever and atty performs top notch.
Will test it a little more and on Monday will make another few for repeatability tests.

OK all fair I guess. Over here on the otherside of the world standing by for your testing results and availability for a juice dispenser (JD) for my Precious-L.

I have been in vape heaven with my L, AW 18650, and LR atties!