- Status
Complete pics coming soon. I dont' have a side by side on one in Satin and one Polished, but the satin is the same finish as the PrecisePlus.
Morning Riverboat! Numbers are just assigned in the order the orders come in so its all luck of the draw.
Whatever number I recieve will be the right one......... Its a Shockwave after all.....
Well, damn, I couldn't resist ordering one of these. I hope my wife doesn't divorce me over it (I kid, I kid - I think). A couple of questions for you folks in the know. I didn't see an option for a flat top version, so I'm assuming these are slant top only. Does anyone know the diameter of the top (at the very top of the slant)? Just wondering.
approximately 20mm at the top of the slant (same as the P+ 18XXX flat top diameter).
It will be a perfect match for the universal fit version too of the Strata rebuildable atomizer/tank.
If you want to just send me mine now, I'll take pictures of the whole thing for you 
The tease photos are killing me!
The tease photos are killing me!
Full View:
Lower body vent detail. 4 equally spaced vents:
Top Cap lower end view.
Shows the spring loaded plunger which makes for no exposed springs to lose and exerts constant pressure on the battery for reliable electrical connection. Note, all pieces of the spring loaded plunger will be Rhodium plated in the production version. A total of 5 parts of the Shockwave are Rhodium Plated
Also note the "D" shaped machining (not round) to securely hold and align the switch pod:
Removable Switch Pod. Contains the user replaceable Snap action mechanical switch, a high amperage version (10amp) of the same switch used in many mouses due to their extreme durability and life and also houses the Spring Loaded Plunger:
Top Cap juice Well View. Production versions will have Rhodium plated Center Post.
Will accept the universal fit Strata rebuildable as well as most all others tanks/rebuildables.
Note machined relief and indexed air flow channels for problem tanks/rebuildables:
Top Cap inside view, switch pod removed.
Gun Drilled for maximum weight savings which can allow the Stainless Steel Shockwave to weigh less then an Aluminum 26650 mod:
Bottom Master On/Off:
[/QUOTE]
Lower body vent detail. 4 equally spaced vents:
Top Cap lower end view.
Shows the spring loaded plunger which makes for no exposed springs to lose and exerts constant pressure on the battery for reliable electrical connection. Note, all pieces of the spring loaded plunger will be Rhodium plated in the production version. A total of 5 parts of the Shockwave are Rhodium Plated
Also note the "D" shaped machining (not round) to securely hold and align the switch pod:
Removable Switch Pod. Contains the user replaceable Snap action mechanical switch, a high amperage version (10amp) of the same switch used in many mouses due to their extreme durability and life and also houses the Spring Loaded Plunger:
Top Cap juice Well View. Production versions will have Rhodium plated Center Post.
Will accept the universal fit Strata rebuildable as well as most all others tanks/rebuildables.
Note machined relief and indexed air flow channels for problem tanks/rebuildables:
Top Cap inside view, switch pod removed.
Gun Drilled for maximum weight savings which can allow the Stainless Steel Shockwave to weigh less then an Aluminum 26650 mod:
Bottom Master On/Off:
Last edited:
Dear David , a very good day to you sir and i hope you are well .
to start with thank you for all the clarification , it really does help .
I have 2 small questions and would appreciate your input .
1) will the non-slotted version of the Shockwave be ready and delivered to the buyers first .
2) when will we know if the slotted version is a go ahead or scrapped .
I thank you in advance for your replies .
wishing you well
warm regards
Sahil
Delivery time is irrelevent if you have the slotted or not, delivery time is dependent on the order in which the orders came in. On the slotted body, as previously mentioned, we are shopping the prints around now and i will let you know as soon as i have any information.
I was wondering this myself and was hoping this would be the answer!
Full View:
Absolutely Incredible!!! I am sure it will look just as hot in Satin. I can't wait!!
I gotta say, when I heard this was available for pre-order I dropped everything and ordered it as quick as I could. It was 2:30am and I was 2.5 sheets to the wind. I was worried I would regret the purchase for about .73 seconds. But, as I suspected, David has come through with an incredible product.
[/QUOTE]Full View:
Lower body vent detail. 4 equally spaced vents:
Top Cap lower end view.
Shows the spring loaded plunger which makes for no exposed springs to lose and exerts constant pressure on the battery for reliable electrical connection. Note, all pieces of the spring loaded plunger will be Rhodium plated in the production version. A total of 5 parts of the Shockwave are Rhodium Plated
Also note the "D" shaped machining (not round) to securely hold and align the switch pod:
Removable Switch Pod. Contains the user replaceable Snap action mechanical switch, a high amperage version (10amp) of the same switch used in many mouses due to their extreme durability and life and also houses the Spring Loaded Plunger:
Top Cap Juice Well View. Production versions will have Rhodium plated Center Post.
Will accept the universal fit Strata rebuildable as well as most all others tanks/rebuildables.
Note machined relief and indexed air flow channels for problem tanks/rebuildables:
Top Cap inside view, switch pod removed.
Gun Drilled for maximum weight savings which can allow the Stainless Steel Shockwave to weigh less then an Aluminum 26650 mod:
Bottom Master On/Off:
In that top pic, the button almost looks like an inset diamond. Very cool pics, David. A day-and-a-half of setup/lighting and photos. I'll bet you're ready for a long nap. Have you answered your emails and pm's yet? Oh, and don't forget inspect, clean, polish, prep, inspect again and pack and ship the other stuff. Wish I could be there to help. Great job. Good luck, son.
Dear David , is there anyway for me to get a slotted one .
I love the one above , but i have been more in love with the slotted one since i saw it .
I do understand that there may be no slotted one made due to the " machineing " problems as stated above ... but incase it can be made THEN is there anyway for me to get me one of them .
Incase it is not made at all , then i would be more than happy with the non-slotted one shown above .
please do let me know and i could place my order straight away .
thanking you in advance
warm regards
Sahil
I love the one above , but i have been more in love with the slotted one since i saw it .
I do understand that there may be no slotted one made due to the " machineing " problems as stated above ... but incase it can be made THEN is there anyway for me to get me one of them .
Incase it is not made at all , then i would be more than happy with the non-slotted one shown above .
please do let me know and i could place my order straight away .
thanking you in advance
warm regards
Sahil
- Status
Similar threads
- Locked
