You'll also notice that David even polished the disc under the "T" on/off switch in such a way as to make the "T" pop, sort of a 3-D effect. Quite the attention to detail, David has. Under light at a certain angle, it almost looks like a crystal.
- Status
Sorry for the noobish video skills, but there is a reason I don't do this kind of thing 
Enjoy!
Shockwave Unboxing & First Impressions - YouTube
Enjoy!
Shockwave Unboxing & First Impressions - YouTube
I received notice on the 25th...hasn't moved yet....get me all excited for nuttin'...j/k. I've waited this long, I can wait some more.
Thanks for the unboxing vid, AJ. Can't wait for the twins to show up. Great to see the first few land!
(
Thanks a lot; watched your video a few times. Can't wait toget mine. Don't get my comment the wrong way but I think I may ne a bit intimidated my the size
Sorry for the noobish video skills, but there is a reason I don't do this kind of thing
Enjoy!
Shockwave Unboxing & First Impressions - YouTube
Thanks a lot; watched your video a few times. Can't wait toget mine
. Don't get my comment the wrong way but I think I may ne a bit intimidated my the size
Last edited:
Size matters?
(
Thanks a lot; watched your video a few times. Can't wait toget mine
Thank you everyone for pictures and videos, the ShockWave looks great. I still haven't received shipping confirmation on my no. 20 , and it will take a bit of time for it to cross the ocean and reach me.
The 0.17v underload drop metered by siouxie with 1.5 ohm was good info. If any other owners have assembled voltmeters to check for underload info, i'd appreciate that, it looks to be a very nice performing mod.
The 0.17v underload drop metered by siouxie with 1.5 ohm was good info. If any other owners have assembled voltmeters to check for underload info, i'd appreciate that, it looks to be a very nice performing mod.
Yahoo! #7 has landed!No shipping notice so it was a complete surprise when I pulled it out of the mailbox yesterday.First thing I notice when I open the box is the DT,Thanks superdave! A one of a kind DT for the shockwave.
Next was how small it really is(yea,yea,TWSS) with the 26650,my other 26xxx PV's are hulking monsters next to the SW.I had to work all night so I just now got the chance to check this Awesome PV out,till Superdave breaks out a stratus,my ZAU will top off the SW like a glove.Thanks David,you made a winner.Now, off to wrap a coil and fill a tank
Next was how small it really is(yea,yea,TWSS) with the 26650,my other 26xxx PV's are hulking monsters next to the SW.I had to work all night so I just now got the chance to check this Awesome PV out,till Superdave breaks out a stratus,my ZAU will top off the SW like a glove.Thanks David,you made a winner.Now, off to wrap a coil and fill a tank
Just a little status update on shipping for those who had received ship notices on orders through #30. I sent out another 5 yesterday. The remainder should go out today.
Just a note as there is some wondering, why did order XXXX show shipped and my order didn't? Though i said they ship in the order they were filled, there should be an asterisk by that. For example, i've had two units now that, upon final inspection, i found surface flaws on. One is satin that needs to be reblasted and one was polished that has a not so nice sratch/nic in the top cap. This means they have to be disassembled and refinished which can add a small delay. (for those wondering Ashley has done all the finish prep on these units, i do the final assembly and inspection/testing).
Edit: Upon reading Aziffels post, thats another potential reason, your order may have actually shipped, sometimes the tracking system doesn't work as it should. Usually it's spot on though
Just a note as there is some wondering, why did order XXXX show shipped and my order didn't? Though i said they ship in the order they were filled, there should be an asterisk by that. For example, i've had two units now that, upon final inspection, i found surface flaws on. One is satin that needs to be reblasted and one was polished that has a not so nice sratch/nic in the top cap. This means they have to be disassembled and refinished which can add a small delay. (for those wondering Ashley has done all the finish prep on these units, i do the final assembly and inspection/testing).
Edit: Upon reading Aziffels post, thats another potential reason, your order may have actually shipped, sometimes the tracking system doesn't work as it should. Usually it's spot on though
Last edited:
]I'll try to do up a video over the next day or so on Shockwave operation.
SW operation In a nutshell:
1. Remove Cap, install battery Positive end up, replace cap
2. Turn bottom master on/off switch clockwise until it stops (usuall 1/4 to 1.5 turns depending on what brand of battery you have in). It rachets in and won't back off on its own.
3. Place the atomizer of your choice on and vape
4. To transport/turn off power: Turn bottom master on/off switch counter-clockwise until flush with bottom of mod, depress top switch to make sure the atomizer power is disconnected, if not rachet another 1/4 turn counter-clockwise and re-verify the atomizer won't fire up. It usually only takes about 1/2-1 turn to disconnect the power. It rachets back too, so it won't loosen or tighten on its own. Be careful to not remove bottom master on/off switch unless necessary.
SW operation In a nutshell:
1. Remove Cap, install battery Positive end up, replace cap
2. Turn bottom master on/off switch clockwise until it stops (usuall 1/4 to 1.5 turns depending on what brand of battery you have in). It rachets in and won't back off on its own.
3. Place the atomizer of your choice on and vape
4. To transport/turn off power: Turn bottom master on/off switch counter-clockwise until flush with bottom of mod, depress top switch to make sure the atomizer power is disconnected, if not rachet another 1/4 turn counter-clockwise and re-verify the atomizer won't fire up. It usually only takes about 1/2-1 turn to disconnect the power. It rachets back too, so it won't loosen or tighten on its own. Be careful to not remove bottom master on/off switch unless necessary.
Good to hear a Shockwave found a home with a fellow Minnesotan. I think i might have one other order from Minnesota coming up. Of course LadyMama has one, but moms don't count, or do they??? LOL...
I'm sorry if this question was already answered, but when will we be able to order again? Or we won't anymore?
There are no plans as of now to make anymore. Never say never though, not sure what will happen in the future.
edit; Forgot to say thank you to everyone that has posted pics and video, SW looks great! Can't fricken wait.
I hope your Mom doesnt see this. Mine's 92 and sharp as a tack, I would never hear the end of it!
Last edited:
- Status
Similar threads
- Locked
