The TobhxStillarexHelios are being fused into 1! (Infinite)

Status
Not open for further replies.

suspectK

Vaping Master
ECF Veteran
Verified Member
Aug 7, 2013
4,573
2,893
Alabummer
Well, I got a hcigar tobh for the time being.. wanted a stillare, but I didn't want to have to grind down post to work with 4nine.. it looked like I would've had to file beginning of 510threading to get it flush..I don't know if that's with the real stillare, or hcigar..but pretty lame..

I hope it ends up being quality for the ones that ordered..if I wasn't broke, I'd be waiting with you.. figured I should pay rent instead. Cuz you know, it all starts out with one atomizer. ;)
 

B2L

Vaping Master
ECF Veteran
Verified Member
Jan 14, 2012
7,844
45,313
Jacksonville, FL
Well, I got a hcigar tobh for the time being.. wanted a stillare, but I didn't want to have to grind down post to work with 4nine.. it looked like I would've had to file beginning of 510threading to get it flush..I don't know if that's with the real stillare, or hcigar..but pretty lame..

I hope it ends up being quality for the ones that ordered..if I wasn't broke, I'd be waiting with you.. figured I should pay rent instead. Cuz you know, it all starts out with one atomizer. ;)

Living under a roof is over rated, IMO, as is eating 3 times a day :D

Sent from my refrigerator box under the overpass
 

treehead

Ultra Member
ECF Veteran
Feb 18, 2014
1,477
1,311
Anchorage, AK, USA
Well, I got a hcigar tobh for the time being.. wanted a stillare, but I didn't want to have to grind down post to work with 4nine.. it looked like I would've had to file beginning of 510threading to get it flush..I don't know if that's with the real stillare, or hcigar..but pretty lame..

I hope it ends up being quality for the ones that ordered..if I wasn't broke, I'd be waiting with you.. figured I should pay rent instead. Cuz you know, it all starts out with one atomizer. ;)

I hear that brother! Honestly I haven't even bought the thing yet myself, I'm watching the quantity and waiting for my paycheck to come in too :lol:. I will have one though, I'll eat ramen for the next 5 days, I'm a vaping bachelor :p.

I bet that Hcigar Tobh is nice, my Tobeco clone is near perfect, and Tobeco is usually less quality than Hcigar. Let me know how it works out, I loved my clone so much I saved up a bit for the real deal, and surprisingly they both vape about the same, the genuine just looks slightly crisper I guess, who cares.

It's my absolute favorite atty right now, I'm waiting on the 28mm version for my mutant clone right now.
 

suspectK

Vaping Master
ECF Veteran
Verified Member
Aug 7, 2013
4,573
2,893
Alabummer
Yeah, I like it..heat sink needs a little dental floss for it..but I kinda like it loose. Even though I use wide bore tips, I like popping the heat sink off to see everything while dripping.. I still prefer my omega over it.. but it is a great atomizer. Juggs juice sweet assets with dual, parallel coils. Only thing I don't like about the tobh is that I have to tuck the wick tail under or over common post legs.. but that's just a little nit-picky

I'm going to drill out my outlets on my magmas..they have a 3mm inlet, but ~1.5mm outlet..I'm going to drill it out as much as possible.. but I doubt I'll get more than 3mm with out getting into wells..
 

Bunnykiller

ECF Guru
ECF Veteran
Verified Member
Nov 17, 2013
17,431
77,270
New Orleans La.
Hey rebuilders, I don't think I've ever been this excited for an RDA to be honest. Infinite, which is a clone company I've respected since they first started, and basically the only clones I buy now, is making THEIR OWN DRIPPER!

It's like Infinite has always been reading my mind, because they literally took my 3 favorite RDA's, and combined them into one beautiful creation!

-The Tobh Atty (The reduced deck, welded posts, concave ceiling, massive post holes, and heat sinks are being used in the design)

-The Stillare (It's awesome massive cyclops style airflow is being incorporated as well, along with the inner cap airflow adjuster (no tobh teeth in the way!)

- The Helios (This is honestly the insanely awesome cherry on top, my favorite post from the Helios (Brass Monkee), the dual positive post ("T" post design), is going to be the middle post! I'm going to be wetting myself until the pre-order.

CHECK, IT, OUT!

New Infinite CLT Atomizer RDA Drip Tip Pre Order Tobh x Stillare x Helios | eBay

does it come with screws to secure the coils?? ;)
 

Susan~S

ECF Guru
ECF Veteran
Verified Member
Mar 12, 2014
16,937
11,694
68
Mpls/St.Paul, MN
does it come with screws to secure the coils?? ;)

Sharp eye Bunnykiller! I just went out to the listing and asked that question. When I hear back I will post here.

Also found out (from reading all the Q&A's) that this seller will be receiving this item next Tuesday.
 
Last edited:

Susan~S

ECF Guru
ECF Veteran
Verified Member
Mar 12, 2014
16,937
11,694
68
Mpls/St.Paul, MN
does it come with screws to secure the coils?? ;)

Yes, the RDA does come with screws. Here is the message I received from the Ebay seller:

"Hi!

Thanks for your inquiry. The boxset comes with screws, screw driver, wicks, and o-rings. I have attached a picture for you to see.
- phitonn"
 

B2L

Vaping Master
ECF Veteran
Verified Member
Jan 14, 2012
7,844
45,313
Jacksonville, FL
Not yet, I contacted the seller on Friday and he got back with me right away and said he was still awaiting arrival. He also offered a discount if I still wanted it or a full refund if not, seems like a stand up guy.

Anyway, I've received tracking on mine, should be here tomorrow :)

Will update as soon as it arrives.
 

B2L

Vaping Master
ECF Veteran
Verified Member
Jan 14, 2012
7,844
45,313
Jacksonville, FL
Had a late night so I haven't had the time to set it up yet. I will be converting it to bottom feed so it will take a little longer than just throwing a build on.

I have a few initial impressions.

It comes very nicely boxed



The contact screw in the 510 is copper, I'm assuming plated as stated.



The machining is good, not stellar but good. The 510 threading is smooth.



I really like the adjustability of the AFC, even dry it is easily adjusted and the air slots are long giving it a good range.



I also like the domed cap but the chamber could have been kept a little shorter to decrease volume even more.

The things that concern me are, the AFC is easily adjusted because these are the thinnest, cheapest o-rings I've seen on any RDA. I'm unsure how they will hold up and whether once in use they will be way too loose. This also means the drip tip is pretty loose, not fall out loose but not a tight fit. An easy enough fix but better O-rings could have been used by Infinite.

Another thing is, this is a pretty light dripper. It's not cheap feeling but definitely not as weighty/ hefty as some. The SS body seems a little bit on the thin side.

Converting it to bottom feed, I'm also concerned about the copper plating on the 510 connection as in how will it hold up and will it react with juice. Not an issue for most.

The proof is in the pudding so we'll see how she vapes as soon as I have a chance to play.
 
Last edited:

B2L

Vaping Master
ECF Veteran
Verified Member
Jan 14, 2012
7,844
45,313
Jacksonville, FL
She's live now





I set her up with dual 10 wrap 24 gauge coils, wrapped on a 3/32 bit, coming in at .4 ohms. Vapor production is very good, flavor is a little muted probably due to the build. I'm going to try a few different coil set ups and see what that does.

The ease of set up with the T post is excellent.

The AFC is the easiest I've used to adjust yet is tight enough not to accidentally get bumped out of position.

So far, so good.
 

TheKiwi

Vaping Master
ECF Veteran
Verified Member
Dec 2, 2013
7,548
18,586
Durham, North Carolina, United States
o_O don't think this is about whether an atty is old news or not. Unless you have a ton of money lying around, you can't keep up with every new thing. It's more about discovering something else with a set of features that will satisfy your vaping needs no?


Burping out loud using Tapatalk
 
Status
Not open for further replies.

Users who are viewing this thread