The TobhxStillarexHelios are being fused into 1! (Infinite)
- Thread starter treehead
- Start date
- th_trl_thread_readers 0
- Status
This is the peak of a side airflow atty.. I love my magmas, but I need to fix leaking 510s and boring out airflow outlet.. I love the draw of my omega and tobh drilled out to a slot. Throat hit is stronger for me with side airflow atomizers also..
I'd like a black one for my ipv...
I'm assuming capacity is better then tobh. How much can it hold, without huge wicks?
I'd like a black one for my ipv...
I'm assuming capacity is better then tobh. How much can it hold, without huge wicks?
Agreed, I have the Viking and Magma, both produce vapor and flavor like no other dripper I own right now and hold a ton of juice. While the others are still real good those are the first two I reach for when dripping.
You are right, no way to mod them to 3mm but it produces enough vapor for me and the flavor it produces exceeds any dripper I own and I have more than a few.
I'm chasing flavor so it's damn near perfect for me and the quality of the dripper is outstanding.
I was blown away by the Magma when I first got it (air flow from under the coil) but thankfully the AFC allows for single coil builds since I find the vape too hot, in dual coil mode, with the Magma. I'm using my Stilare more than any other atty so this is great news for me.
My 2 cents is this is about me and anyone else that wants one of these not others jacking this thread and calling it old, I have a stillare so I can not wait to get the clt those drippers every one else has should be dicussed in there own threads
It was not my intention to "Jack anyones Thread" I just offered up my opinion and obviously some agree with me
this is a discussion board and everyone is entitled to there opinion even if you Don't Like it!!
this is a discussion board and everyone is entitled to there opinion even if you Don't Like it!!
Before this gets outta hand my intentions was not to offend you or anyone else but for the price of these it's worth it alsi
Got mine today. Set it up for dual micro coils. Coming in at 0.41 ohms. Nice vapor and decent flavor. As somebody else stated the body is way to high so it does mute the flavor. The vape is very cool compared to my magma. Its a nice little RDA.
Put your coils closer to the airflow on your magmas.. I find them to be one of the coolest drippers.. once I built it like that.
Ok...heat sink is attached to AFC? So not easy to pop off like tobh? I love that about the tobh..
Ok...heat sink is attached to AFC? So not easy to pop off like tobh? I love that about the tobh..
The heat sink and inner sleeve of the AFC are 1 piece, it does come off easily but together. The only issue with it is when you take it off you will get a little juice on your fingers.
So. Anyone had issues with the spinning t-post?
Burping out loud using Tapatalk
Burping out loud using Tapatalk
Yep! It's an awesome little RDA, if you've ever vaped a Tobh, it's basically identical except there's a noticable difference in the amazing airflow. The conical design on the top cap is very circular like the magmas making it a smoother airflow that I can feel, and the long stillare cyclops holes in the sleeve are just awesome, they line up better with your horizontal coils so it's completely surrounded with fresh air.
The only cons I can come up with are the fact that the stillare AFC cap will come down and crush your coils (if they're over the rim of the building deck drip wall, so don't have your coils hanging over the outside and it's fine), and that the o-rings aren't super tight (personally I love this about it, when they get juiced up, you can adjust your airflow, or remove your top cap like your in a pit-stop, super "buttery" feeling.), they're nice and snug, but if for some reason you like to hold your atty by the top cap (which nobody should do anyway) and have a heavy mod, one little shake will definitely have it coming off. However if you don't like an easily removable top cap, you can always do the dental floss trick!
I love this thing, everything about it is just made right, super duper easy to build on, adjust everything (including your 510 connection), great airflow, deep drip well (slightly more shallow than the Tobh's, but pretty darn deep, just stays out of the way for when your building
), looks great, and can be anything from a pro chaser of the clouds, to a reduced chambered flavor chaser. Plus you can't beat that price for a well engineered and machined atty! Honestly the coolest part to me is the fact that a cloning company (Infinite; whom I love and respect), made their OWN device! It signifies the start of something big I think, now you can see all the other clone companies making their own mods and atty's, as well as making previous atty's bigger/adjusting them to be better.I'm really mad that I became addicted to 26650 atty's
, because this is definitely my favorite 18650 atty, even over the Tobh. If they make a 26650 version, I'm going to cream my jeans.
See? Another great reason for the Magma to increase it's airflow size
. I agree with everyone in that the flavor from the magma is superior to anything (I've tried), now imagine if it came with optional at least 5/64th's" airflow 
, it'd turn some of that extra flavor into huge plumes of vapor, OR in your case KC would cool down the dual coils more so it wasn't as intense.I personally like a light flavor, I vape 100% VG, and love watery fruits like Honeydew, watermelon, or lighter desserts like strawberry custard, or creamy ones. And on my magma, it makes some flavors tastes too condensed! (Which in the end is a great thing
) But my taste buds are probably just not used to it, I can appreciate that it kicks you in the teeth with flavor lol, I really think it'd be the best of both worlds if you had the *option* for frankly MASSIVE airflow. I think it's design would be for both flavor junkies and cloud chasers alike. Making a cloud chaser out of an already good flavor RDA, would probably just turn it into alot more of great tasting vapor! One of these days I'm going to take a dremel to my magma (I should probably get a clone on second though ), and open it's airflow up vertically towards the outer-edge, so-as to make a vertical oval-like shape, I bet it'll be a whole new animal.
Everyone wants to be the cutting edge hipster these days hehe, just kidding guys. I honestly posted this as fast as I could as soon as I found it, mostly because I wanted all of ECF to know about it, but partly because I wanted to be the guy to do it lol, so I'm somewhat guilty of hipster-itis. Funny thing is, when I posted it, it was only up for 4 days lol 
. How late could I have been?It's not important though
, point is it exists, and its AWESOME! 
I noticed that the "ceiling" was a little higher than the Tobh as well, however it's alot more domed than the Tobh (which is more of a straight slant), and I noticed some pretty silk smooth airflow resulting from it (then again I drilled mine so it has the "cyclonic airflow", so maybe that helps alot with the dome shape). I think I prefer the slightly more reduced Tobh chamber, however the awesome airflow makes up for it. I've always liked both cool and warmer vapes, as long as I get big flavor and big vapor I'm happy!
Not yet, I'm crossing my fingers, because I've literally spun every single post I've had besides my authentic Tobh, I'm so rough on my atty's when building and tugging on the coils.
Interesting. Watch vapingwithtwisted's review and another guy's. Both their center post was really loose.
Burping out loud using Tapatalk
- Status
Similar threads
- Locked
