The VapeMate Juice Feeder by SuperT!

[chimney55]

Well, I think that it looks just like what I need. I'm disabled, and spend much of my time at home. I've tried carts, cartos, and dripping. That can be a pain at times. About a week ago, I said on another thread that I wished that there was a way just to screw on a bottle of juice and be done with it. LOL! But I have wait until I get my next check to order.

 

[grimmer255]

Sorry to hear about your home situation.

The feeder will work with the 510 and 901 as is. I'll be doing a 306 adapter and it's looking more and more like an 801 too

please make an 801 adapter... I made the order for the juice feeder today... I have an idea to make it work on my mini 801...but an adapter would be a much better fix. I cant wait to get the juice feeder.... dripping days may be a thing of the past....

Keep ON

 

[forcedfuel50]

thanks for the links Hzg8rgrl! I'll have to check those bottles out!

antavanhalen: I hope to have them sometime in November, but it will probably be a bit after the feeders first come available

Krisb: Yes, the preorder will stay open until they are available. The first batch is going to the anodizers on the 2nd

 

[forcedfuel50]

Grimdog: Do regular 801 drip tips fit in those short 801's?

 

[juicefreak]

The key two requirements on making one that wraps around the atomizer is 1) The juice can't actually be in contact with the outside of the atomizer as juice is mildly caustic and slowly dissolving paint or clearcoat particulate matter into your juice and 2) the resovoir can't be made of aluminum as again, the juice is slowly dissolvling the aluminum and you are injesting aluminum particulate matter. Perhaps a tank of made of some type of durable, food safe plastic.

bummer i was hoping it would be a top feeder too. a 5ml bottle on the side would be too much for my hands. it's a very nice design though david. incorporating it into a box mod would hide it and still get the functionality.

 

[Poppa D]

I agree with misterD.
It looks solid as a rock and well thought out, but still awkward.
Good luck with it.

 

[metapuff]

very nice. looks better than the ones with a tube that goes around the bottle. was hoping for something a bit sleeker in overall design but then you run into other issues i suppose. can't have everything. still it's enough to get me on board.
in for two. woot!

 

[stv888]

i was hoping for somthing a lot more asthetic looking,,,this is just too weird for me
but i must say it is built in a super t tradition of unbeliveble quality
i am sure some people will like it but i was hoping for somthing similar to a gg,,like an extension tube but good luck anyway

 

[dannoman]

This might work fantastic to keep the E2 cartomizers wet. IMO they are were its at for flavor and vapor production (especially if you take a few minutes to mod them correctly). The nice thing is if you drip enough to fill the cup the extra just flows into the tank. And even with the cup full it only takes two or three hits to clear the draw.

Oh man, that might be the greatest set-up ever.....

OK...I was thinking the same exact thing.

In my brief foray into e-cigs I have found that I am not at all enamored with dripping. User experience is very very subjective.

- You know its time to add fluid when things get a bit dry but, when you hit that wall, its somewhat harsh. That's no fun when the most you can puff off a filled atty is maybe 4-5 inhales. My throat is somewhat sensitive and its been getting irritated, been coughing alot more than when I was simply using Green Smokes.

- You watch the video demos - 2 drops, 3 drops - "eh I think this atty can handle 4 drops". I have some attys that after only three drops they seem to flood and I have to draw several times to get things 'primed' again. Again, um, this is no fun. I want to sit in front of my computer, doing logos for my clients and not have to think about this.

With a properly working cartomizer (I am using E2 R4's) you fill it and forget it. 1 ml of juice seems like it can last for hours for me. Filling a cartomizer is a defined absolute exercise, not relative to the atty you are using, not subject to much of the 'play' you get when dripping. For example I have seen videos where they recommend dripping through the tip. Well yeah but - hold your hand steady - did it hit the side of the tip and - not make it down to the coil? Um, if it did let it ride on down, maybe rolling the atty in your hand. :\, etc., etc., etc.,

Prefacing all of this by saying 'properly working carto'

Anyway with all that in mind I would be very very interested in this if you could use this method to fill the reservoir on your carto, keeping either filler or wick wet? With a carto the drop off in flavor, etc starts happening a bit more subtly and far fewer between. So you have a situation where you know that you have probably gone through about half your juice because you have vaped for an hour or so, so you squeeze the bottle a couple of times to keep things wetted. and what would be even better is a clear carto where you could keep an eye on that also...

 

[dannoman]

It actually does feed right onto the heating element, unless you squeeze really slow. But if you just give it a pump, it squirts/drips out right onto the coil as the juice passage is just about on center. The distance between the juice outlet passage and the heating element is about .040 (it varies a bit with atomizer brand), its right there on it for all pratical purposes. It works well. Some actually though like the juice to go down the side of the atomizer too and that is accomplished by just squeezing a bit slower and angling it.

There are actually several ways to hold and use it, as well as position it. You'll have to experiment and use what method works best for you.

This is interesting...it would be great to have some sort of regulated spritz so it isn't so subjective to how hard you squeeze. When you say don't go really slow so as not to drip inside walls of atty that would make me think I need to just plunge that bad boy, and plunging too hard could flood things right?

You are coming from the top then and I would think this is better. Someone correct me if I am wrong. If you go from the bottom with bottom feeders like ali'i and reo aren't they trying to get to the atomizer from the bottom from a tube going up inside the atty?

 

[CloudBurst]

Just thought I'd add that some syringes fit tight over the CE2 carto tubes, for the 306's to work all you'd need to do is cut a small piece and add it to your atty like the pic a few posts back with the 510 tube. We are using them on the CE2's with NO leaks. It's my all day vape till I get this thing!

 

[atavanhalen]

Grimdog: Do regular 801 drip tips fit in those short 801's?

I am sure that grimdog would want me to answer this for him so yes they do.

 

[josborne024]

Love the look of the vapemate paired with the new shockwave they look made for each other . In my opinon it will be an at home vape something that I can sit down on the coffey table standing up right or in the car like you said . Reminds me of an old paintball gun I used to have but I love the look . It will be a conversation pease for shure but I'm ok with that just gives me a chance to let more ppl know about the alternative to smoking . Well david you went and done it again thinking out side the box . But that's what vaping is all about being outside the box of smoking . Will put on my wish list . Is there going to be anyone doing a review of the vapemate on utube that you know of . Well the mod kicks ... and keep them comming .

Sent from my Droid

 

[debb]

Not sure if I can pre-order until next week, will it still be going on that long?

hope so too...

 

[Vaporologist]

I am sure that grimdog would want me to answer this for him so yes they do.

They do? Not in my experience. They fit the Semi but not the Mini

 

[Switched]

They do? Not in my experience. They fit the Semi but not the Mini

What VP stated. They fit the semi (mid size) but not the shorty/mini.

 

[grimmer255]

Grimdog: Do regular 801 drip tips fit in those short 801's?

not all the way down.... the mesh inside the mini 801's sits higher up.... I would say it fits half way down, just a little past the O-ring for a good air flow. If I pushed it further down than that the airflow around the outside of the mesh is decreased and that creates a gurgle sound and starts throwing up eliquid.... not very tasty.... But if adjusted just right (takes 2 seconds for a proper adjustment) it works very well.

the modification for the juice feeder

I took the plastic tips that came with the 801 and I cut the flat tip part off.... After a little trimming around the edges, I then placed a 510 drip tip inside it and that worked perfectly for fitting purposes.... It's probably going to be the best alternative to use the juice feeder (crossing fingers) until an adapter comes out.

 

[forcedfuel50]

Yeah, i don't see why one couldn't just drill out an 801 tip to the id that fits the juice feeder. I'm not a big fan of adapters, but it'd be a quick fix for the 801's atomizers that can accept a regular 801 drip tip.

 

[forcedfuel50]

I should also mention that i took the Ego into account when designing this Universal feeder
as well as safety considerations:

 

[vapn]

That better be a tight fit or leaky, leaky.

Been using the same one for weeks now with no leaks what so ever. I can easily pull a drip tip out without disturbing the tube. The boge ones are a little smaller in diameter and are slightly loose but the Joye brand 306 fit very tight.