The VapeMate Juice Feeder by SuperT!

[Johnny 5]

I found a great solution for the 6ml soft bottles that works like a charm. The problem with the tips are they are too fat. I had to sacrifice a bottle for this, but you get a custom fit that will not leak and is very clean when changing bottles.

1. Boil some water
2. Put a tip on a bottle (This bottle will be deformed in the process, but I did 10 tips from same bottle)
3. Hold the bottom of the bottle with pliers and dip the tip in the boiling water for approx. 30 seconds
4. Remove from water and immediately screw bottle onto your vapemate (if you have the O-ring installed remove it first)

I got the idea while watching Sunday Night Football and I remembered doing this to get a custom fit on our mouth guards in high school.

I hope this helps. This is the best way to get these bottles to fit and they fit perfect.

 

[Technonut]

VERY helpful solution and info Johnny 5... Thanks!

I found a great solution for the 6ml soft bottles that works like a charm. The problem with the tips are they are too fat. I had to sacrifice a bottle for this, but you get a custom fit that will not leak and is very clean when changing bottles.

1. Boil some water
2. Put a tip on a bottle (This bottle will be deformed in the process, but I did 10 tips from same bottle)
3. Hold the bottom of the bottle with pliers and dip the tip in the boiling water for approx. 30 seconds
4. Remove from water and immediately screw bottle onto your vapemate (if you have the O-ring installed remove it first)

I got the idea while watching Sunday Night Football and I remembered doing this to get a custom fit on our mouth guards in high school.

I hope this helps. This is the best way to get these bottles to fit and they fit perfect.

 

[ukeman]

awesome !!!

I found a great solution for the 6ml soft bottles that works like a charm. The problem with the tips are they are too fat. I had to sacrifice a bottle for this, but you get a custom fit that will not leak and is very clean when changing bottles.

1. Boil some water
2. Put a tip on a bottle (This bottle will be deformed in the process, but I did 10 tips from same bottle)
3. Hold the bottom of the bottle with pliers and dip the tip in the boiling water for approx. 30 seconds
4. Remove from water and immediately screw bottle onto your vapemate (if you have the O-ring installed remove it first)

I got the idea while watching Sunday Night Football and I remembered doing this to get a custom fit on our mouth guards in high school.

I hope this helps. This is the best way to get these bottles to fit and they fit perfect.

 

[Teach]

I hope this helps. This is the best way to get these bottles to fit and they fit perfect.

Excellent fix Johnny 5! Thanks for all your ideas! Gotta' try this.

 

[debb]

got mine today! and i didn't even know it was coming..

 

[KonaNeil]

Sometimes USPS doesn't update until they drop it at your door. If i were a betting man (i am) i'd bet it will be in your hands tomorrow

Thanks all. Thanks Dave; you win your bet;-)

 

[vapn]

I found a way to get more liquid in the atomizer without squeezing the bottle. I don't know if it will damage anything in the process, but it worked on my drive home from work this morning. I have a hard time squeezing while driving, so I just covered up the hole/vent on the side while I took a draw on the drip tip (I did have the bottle tipped so the fluid level was at the top). Worked like a charm.

Yep you were auto feeding... I had a good day yesterday with mine. I vaped almost 10ml without touching the bottle. Check out this thread... Today was not so easy. Back to squeezing. No big deal though. Once you get used to the bottle you are using it is so simple.

 

[wolflrv]

Got mail today..and VapeMate was in there!! I had to wait til later though to play with it...had to go fix sis-n-law's computer. Got home..tried it out..flooded the heck out of it! LOL! Then the atty I was using died...then the battery ran out...geezz!! Went out to shop..got RC tubing...cut tip..installed tubing, refilled with juice, fresh atty, fresh battery...and I'm finally vaping like a fiend!! Heck ya!! No need to even squeeze the bottle...runs like a champ!! Runnin' a LR901 atm on my FogLog w/18650 battery. Works great, awesome vapor and great taste! Looking forward to trying it out with new P18 I just ordered. I tried to run it on my BSB, but the switch is pretty fried in it..barely get any voltage coming through, so just slogs juice everywhere, unvaped. I might have to setup another 510 FogLog till my P18 arrives...LOL! VapeMate is a winner though...hands down!! Easy to use, switch around, clean and vapes great!!

 

[Technonut]

Good stuff... Would you post pics of your set-up (Including close-ups of the tubing placement) for us?

Got mail today..and VapeMate was in there!! I had to wait til later though to play with it...had to go fix sis-n-law's computer. Got home..tried it out..flooded the heck out of it! LOL! Then the atty I was using died...then the battery ran out...geezz!! Went out to shop..got RC tubing...cut tip..installed tubing, refilled with juice, fresh atty, fresh battery...and I'm finally vaping like a fiend!! Heck ya!! No need to even squeeze the bottle...runs like a champ!! Runnin' a LR901 atm on my FogLog w/18650 battery. Works great, awesome vapor and great taste! Looking forward to trying it out with new P18 I just ordered. I tried to run it on my BSB, but the switch is pretty fried in it..barely get any voltage coming through, so just slogs juice everywhere, unvaped. I might have to setup another 510 FogLog till my P18 arrives...LOL! VapeMate is a winner though...hands down!! Easy to use, switch around, clean and vapes great!!

 

[wolflrv]

Ok..took some pics of my two bottles set up. Both are very simple to set up. The first 2 pics show the standard 10ml childproof cap with 1/4" tubing. Just pick up some 1/4" tubing from any hardware store, insert it into the cap end and cut to fit in the bottle. That's it.

The next 2 pics show the tube setup for the 6ml non-childproof type bottles. For these you'll need to cut the tip off the end just less than halfway and use 3/16" tubing. I'm using RC fuel line for mine available at most hobby shops or someone else mentioned trying aquarium supplies. The fit on the tubing is a bit snugger, but it does fit in there.

These are very simple to set up and if you buy a foot or two of tubing you can easily mod a dozen bottles. Hope this helps!

 

[Vaporologist]

Thanks a lot wolflrv for the pics and simple yet detailed instructions...

 

[forcedfuel50]

A Big thanks Wolf, for taking the time to do those pics up!!

 

[wolflrv]

No problem...glad to return the favor, considering how many times pics on ECF have helped me out!

 

[debb]

thanks wolf..!

 

[HzG8rGrl]

Today I had a six hour drive on my hands. This is the first time I looked forward to this drive. I make this drive multiple times a year and never do I look forward to making the trip.
This time was different, I had a new piece of equipment to try out.
This was the easiest vaping trip I have had to date.
Early on (8 months back) I was swapping carts while driving. Then I tried cartomizers, still not happy. Moved on to dripping, I like dripping. My significant other was always saying "You want me to do that for you?".
I had my VapeMate with me this time and let me tell you, I am impressed. I played with this for 2 days before going out of town/state, trying to get a feel for the squeeze of my bottle and watching through the site glass.
It is much easier to get the feel of it when driving. Strange how not being able to put your full attention to watching improves the user ability. I never once flooded my atomizer. I am stunned.
The VapeMate is successful for dripping and driving, a home run! IMO. Between the VapeMate and my P18, the trip was quite easy. I did top off my little 5ml bottle at lunchtime. It is easier to drip with a full bottle, not hard when half full, just easier when full.
I just asked my S.O. and he says there was not this constant commotion of digging for juice, changing things out. He did not feel any angst from me.
My only question for improvement........Can the site glass be put in in a way that it can be seen from both sides? It would be perfection if you did not have to turn it to a specific side, truely mindless.

 

[StarsAndBars]

You guys are hilarious. I can't wait to see someone with that thing. I admit, genius for a long drive, but just trying to imagine some guy walking down the sidewalk with a 30 ml bottle attached. You gotta admit it would be funny.

 

[HzG8rGrl]

You guys are hilarious. I can't wait to see someone with that thing. I admit, genius for a long drive, but just trying to imagine some guy walking down the sidewalk with a 30 ml bottle attached. You gotta admit it would be funny.

I use a 5ml bottle, you really have no clue as to the relevant size of a pv and the VapeMate. It is not what you think. Seems to me it just isn't something for you. To put a product down when you haven't a clue is really .......well, making remarks about something you have never seen nor tried.
Kinda like when my kids, never mind.

 

[Technonut]

You guys are hilarious. I can't wait to see someone with that thing. I admit, genius for a long drive, but just trying to imagine some guy walking down the sidewalk with a 30 ml bottle attached. You gotta admit it would be funny.

I have absolutely no problem walking around with a 6ml bottle and the VM on my eGo.. Have not had anyone laugh at me yet.
I don't know.. Perhaps me being a hair under 6' tall, and weighing 205 has something to do with that...

 

[dannoman]

: ) ...I syringe modded an E2 carto and I was in Ace Hardware lookign for stuff related to my vaping and the kid came over and asked me If I needed any help and I pulled out my syringe mod and his eyes got big and started peppering me with questions. He was very fascinated as he has friends that have been trying to quit...he called his co=worker over and they asked me to demo it which I did. I told them this wasn't a 'normal' looking ecig and i gave them cignot's web addy to give to tyheir friends (she is great for noobs with her info and kits)...

Anyway I think these are for function and not so much for form. They look extremely easy to change out bottles or PVs for that matter and for 60 bucks they are a viable addition to anyone's arsenal. LOL--of course I wouldn't publicly vape with it but that's not what its for...I always get out of my speeding tickets when I am pulled over. I think I'd get a ticket just for looking suspicious with this. I'd like all putting it in my glove compartment. The cop would say, "What did you put in there?". "Oh its my vapor" I'd say with a nervous laugh. Then he'd ask me if he could drop my glove box and I'd say , "Sure" and then he'd go "I don't know what THAT is" then he'd be all looking at me suspicious and go back to his cruiser and bring my ticket back...

Nevermind me, just felt like telling a lil story...

You guys are hilarious. I can't wait to see someone with that thing. I admit, genius for a long drive, but just trying to imagine some guy walking down the sidewalk with a 30 ml bottle attached. You gotta admit it would be funny.

 

[HzG8rGrl]

I've been reading that E2 carto thread and wondering, can I do that?