The Vmod XL 18650 Bottom Feeding Mod from Vapage.com

[Tat_skull]

Wazzzup chopper

 

[whatitstrue]

Try backing off the atty SLOWLY as you're drawing on the atty, see if that works

I tried that untill I lost center post contact and then barly tightened it enough to make contact. It was still tight. I also tried removing the oring inside, loosining the top nut, blowing out the atty and none of that seemed to work. It vapes well the pull is just really tight.

 

[whatitstrue]

don't have that problem with mine but i do like hh357 on the xl but even the one that came with is a good draw maybe you have to break it in the threads seem real tight but mine is getting easier every time i change it

Ok. That sounds promising. Maybe it just needs to be broken in a little.

Thanks chopper and Tat!

If any body else could chime in I would appreiciate any thing anyone could add to that. Thanks

 

[chopperguys]

hey tat check out the vmodXL desk holder i found

 

[Tat_skull]

I tried that untill I lost center post contact and then barly tightened it enough to make contact. It was still tight. I also tried removing the oring inside, loosining the top nut, blowing out the atty and none of that seemed to work. It vapes well the pull is just really tight.

I think I'll have to let one of the XL'ians with 510 or 306 experience chime in on this one, cause with the 901 I have a full adjustable draw

 

[Tat_skull]

NICE FIND chopper

 

[chopperguys]

yeah i also have a thing for skulls its a bad habit LOL

 

[Tat_skull]

yeah i also have a thing for skulls its a bad habit LOL

No it's not

 

[chopperguys]

tat I'm getting my sleeves done with all H.R. Giger ill send u some pics

 

[Tat_skull]

tat I'm getting my sleeves done with all H.R. Giger ill send u some pics

Sounds good, I only got 1 and 3/4 done

 

[chopperguys]

I'm about like 75% both arms but need fill in all the small areas from old tats of reapers

 

[Ostinato]

No problem to use the XL with an adapter Tat? I mean you have the adapter, the collar, the cone... lot of things now on top of the device.

 

[MrEctions]

Put an order in for the XL yesterday. At that price it was too hard not to. It will be my first bottom feeder, so really looking forward to it. Has anyone been using the boge carto's with it SR or LR? They are my go to carto, and I prefer them over atty's. I also picked up some 5v batts with charger, and a couple aw imr's 18650's. I have 2 rcr 123 for 6v, but I find myself really prefering 5v on my vv box.

 

[AlmightyGod]

hey tat check out the vmodXL desk holder i found

They make a bottle of booze that looks like that skull.

 

[AlmightyGod]

Put an order in for the XL yesterday. At that price it was too hard not to. It will be my first bottom feeder, so really looking forward to it. Has anyone been using the boge carto's with it SR or LR? They are my go to carto, and I prefer them over atty's. I also picked up some 5v batts with charger, and a couple aw imr's 18650's. I have 2 rcr 123 for 6v, but I find myself really prefering 5v on my vv box.

Welcome to the club!

LR is great for 3.7v.
SR for 5v.

 

[MrEctions]

Perfect. Now to pick out what juice to use. Got a big order from BWB and Vapealicious in, decisions decisions. Ag's dream or MaltyT......

Welcome to the club!

LR is great for 3.7v.
SR for 5v.

 

[Dusty_D]

I've gotta try out the Boge LR's one of these days. Pretty much set with the Resurrector's and SmokTech Dual Coils. Any idea how the Boge LR's compare to them? Would it be worth getting them over the ones I already use?

 

[AlmightyGod]

Perfect. Now to pick out what juice to use. Got a big order from BWB and Vapealicious in, decisions decisions. Ag's dream or MaltyT......

Both are good selections, but I think you know my answer...

I've gotta try out the Boge LR's one of these days. Pretty much set with the Resurrector's and SmokTech Dual Coils. Any idea how the Boge LR's compare to them? Would it be worth getting them over the ones I already use?

The Boge LR are 2.0ohm, so for 3.7v, I prefer the 1.7ohm Resurrectors. The DCC need 5v or more for me.

 

[MrEctions]

I've gotta try out the Boge LR's one of these days. Pretty much set with the Resurrector's and SmokTech Dual Coils. Any idea how the Boge LR's compare to them? Would it be worth getting them over the ones I already use?

Think its personal preference. I have the smoketech DCT, and use the with the resurrectors, but I prefer the boge's as they have a more airy draw imo. I also think I get a bigger vapor production from boge, but its to each their own.

 

[MrEctions]

Both are good selections, but I think you know my answer...

Yea, the Ag's dream, is just that, a dream. But really been digging the St Louis gooey butter cake as well. Also have some great Mst's juices. I may just need to grab another XL so I can have the best of both worlds!