The Womper Woom OR You Might Be A Modwomper

Status
Not open for further replies.

Debadoo

ECF Guru
ECF Veteran
Verified Member
May 18, 2012
18,052
133,969
Texas, near Fort Hood
6dj4wuT.png
Thanks Darlin! Sounds great. Most of mine are FA. Missin the first 3, but will put those on the list.
 

chopdoc

Vaping Master
ECF Veteran
Verified Member
Aug 30, 2014
3,292
12,571
Independence, Louisiana, United States
Thanks Darlin! Sounds great. Most of mine are FA. Missin the first 3, but will put those on the list.

If you want the real deal, ya gotta use the real ingredients. Cutspy who was the disgruntle employee who leaked the recipe said its all Capella flavors. I vaped many bottles of the real Unicorn Milk and was a huge naysayer on the so called leaked recipe being real. After months of listening to all the rave on it I ordered the flavors I needed, gave it a try and it is dead on to the original.
 

Debadoo

ECF Guru
ECF Veteran
Verified Member
May 18, 2012
18,052
133,969
Texas, near Fort Hood
If you want the real deal, ya gotta use the real ingredients. Cutspy who was the disgruntle employee who leaked the recipe said its all Capella flavors. I vaped many bottles of the real Unicorn Milk and was a huge naysayer on the so called leaked recipe being real. After months of listening to all the rave on it I ordered the flavors I needed, gave it a try and it is dead on to the original.
If/when I can get the missing 3, I'll probably see if I like it well enough that way before thinking about trying to get all of them in Cap. If I really like it then it would be worth getting them. Pretty sure I would like a strawberry custard though!
 

jaytex1969

Super Member
ECF Veteran
Verified Member
Feb 27, 2015
946
5,275
Austin, TX
I have never tried Latakia net, where did you get it from?

I bought a metric ton of River Bottom Fog Sauce at heavy discount when they uncoupled from vaping Watch and then went under.

I'm plugged into the NET thread here and many have nothing but good things to say about "NET.com":

www.Naturally-Extracted-Tobacco.com, e-liquids for electronic cigarettes

I may have more RBFS than I can get through. Not sure how much is Latakia, but I'll check. Do you like Perique, by chance?



Jay :headbang:
 

Atchafalaya

Vaping Master
ECF Veteran
Verified Member
Aug 26, 2013
4,081
35,226
Central Texas
If/when I can get the missing 3, I'll probably see if I like it well enough that way before thinking about trying to get all of them in Cap. If I really like it then it would be worth getting them. Pretty sure I would like a strawberry custard though!
Yum! As soon as my life gets a little "less" hectic, we can have that DIY learning lesson. *Please*? :)
 

Debadoo

ECF Guru
ECF Veteran
Verified Member
May 18, 2012
18,052
133,969
Texas, near Fort Hood
Yum! As soon as my life gets a little "less" hectic, we can have that DIY learning lesson. *Please*? :)
absolutely hun!! Just got my 60 ml syringe yesterday in fact. My dil usually goes to her folks most weekends, and sometimes during the week. So most anytime would be fine. If it's a rare weekend that my son is off, then maybe not, unless they both go to her folks like last weekend. But just let me know when you're available!! If they're not here, you could even stay the night if ya wanted
 

Rixsta

The Millionaire Vapor' The Enabler
ECF Veteran
Verified Member
Apr 8, 2015
6,590
39,924
49
Somerset, UK
Yum! As soon as my life gets a little "less" hectic, we can have that DIY learning lesson. *Please*? :)

absolutely hun!! Just got my 60 ml syringe yesterday in fact. My dil usually goes to her folks most weekends, and sometimes during the week. So most anytime would be fine. If it's a rare weekend that my son is off, then maybe not, unless they both go to her folks like last weekend. But just let me know when you're available!! If they're not here, you could even stay the night if ya wanted
My DIY tools are pretty simple but I've found it's all I need

8yu8m9.jpg

Ignore that silly tall measuring thing though, it's pretty much useless, the VG sticks to it and you end up with completely the wrong measurements.. The 100ml syringe is great for VG, the little one for PG, Flavorings and Nic, it's that simple.

This little syringe is also great for filling tanks...
2mq7t4j.jpg
 
Last edited:

chopdoc

Vaping Master
ECF Veteran
Verified Member
Aug 30, 2014
3,292
12,571
Independence, Louisiana, United States
I bought a metric ton of River Bottom Fog Sauce at heavy discount when they uncoupled from Vaping Watch and then went under.

I'm plugged into the NET thread here and many have nothing but good things to say about "NET.com":

www.Naturally-Extracted-Tobacco.com, e-liquids for electronic cigarettes

I may have more RBFS than I can get through. Not sure how much is Latakia, but I'll check. Do you like Perique, by chance?



Jay :headbang:

I like Perique as an enhancer and it also mixes well with lakatia. It also goes well with a grassy/hayish type of tobacco vape like a dessert ship or highway.

I am past needing NET or really even nicotine anymore. I just keep using low doses of nicotine out of hard headedness plus I look at it like caffeine, a stimulant. I do love an exotic tobacco flavored blend so when you mentioned latakia you had my full attention :D
Gonna have to give a few of thier flavors a try and i seen they had a Perique/apple blend that has my mixing gears turning. :thumb:
 

chopdoc

Vaping Master
ECF Veteran
Verified Member
Aug 30, 2014
3,292
12,571
Independence, Louisiana, United States
My DIY tools are pretty simple but I've found it's all I need

8yu8m9.jpg

Ignore that silly tall measuring thing though, it's pretty much useless, the VG sticks to it and you end up with completely the wrong measurements.. The 100ml syringe is great for VG, the little one for PG, Flavorings and Nic, it's that simple.

This little syringe is also great for filling tanks...
2mq7t4j.jpg

I have and use to use all that stuff. now it sits in a box unused. Ever since i learned about mixing with a digital scale i havent had a need for any of it. Now my mixing gear consist of a scale, and 2 3ml pipettes. Clean up is rinsing out 2 pipettes. If yall only knew how easy mixing by scale was you too would be doing it that way.

Look at it like this. I want to mix up 3 15m bottles of different fruit flavors of Rixsta donut mix at 3mg nic. I get out three clean 15ml bottles. Put one on the scale, hit tare to zero it and drip .47 grams of nicotine, next bottle, hit tare and .47 nicotine, next bottle hit tare and .47 grams nicotine. Hit tare again and first ingredient, is fruit. add 1.5 grams of fruit, next bottle hit tare and add 1.5 ml of a different fruit flavor, next bottle hit tare and another 1.5 grams of fruit flavor. Same bottle, tare to zero and .3 grams of marshmellow. Swap bottle, hit tare and add .3 grams of marshmellow and do that with third bottle. Same bottle on scale hit tare again and add .3 grams of custard. Repeat for next two bottles. now just add needed PG and VG to each bottle and your done. My flavors and nicotine as well as VG are all in dripper bottles so I dont have anything to clean up. Shake and vape, put scale away your done.

Doing it the way yall do with the graduated cylinders your just finishing up the first flavor and have two more to mix up, but have to stop and rinse out stuff before you can mix the next batch. Im done with all three. With the cylinders it will take you about 15 minutes or more to mix up the three 15 ml bottles. I am all done in 5 minutes with scale and no eye strain squinting at those graduate lines, no math figuring out where on the graduated line I need to be after each ingredient. Its just so much simpler by scale and so much more exact.
 

Rixsta

The Millionaire Vapor' The Enabler
ECF Veteran
Verified Member
Apr 8, 2015
6,590
39,924
49
Somerset, UK
I have and use to use all that stuff. now it sits in a box unused. Ever since i learned about mixing with a digital scale i havent had a need for any of it. Now my mixing gear consist of a scale, and 2 3ml pipettes. Clean up is rinsing out 2 pipettes. If yall only knew how easy mixing by scale was you too would be doing it that way.

Look at it like this. I want to mix up 3 15m bottles of different fruit flavors of Rixsta donut mix at 3mg nic. I get out three clean 15ml bottles. Put one on the scale, hit tare to zero it and drip .47 grams of nicotine, next bottle, hit tare and .47 nicotine, next bottle hit tare and .47 grams nicotine. Hit tare again and first ingredient, is fruit. add 1.5 grams of fruit, next bottle hit tare and add 1.5 ml of a different fruit flavor, next bottle hit tare and another 1.5 grams of fruit flavor. Same bottle, tare to zero and .3 grams of marshmellow. Swap bottle, hit tare and add .3 grams of marshmellow and do that with third bottle. Same bottle on scale hit tare again and add .3 grams of custard. Repeat for next two bottles. now just add needed PG and VG to each bottle and your done. My flavors and nicotine as well as VG are all in dripper bottles so I dont have anything to clean up. Shake and vape, put scale away your done.

Doing it the way yall do with the graduated cylinders your just finishing up the first flavor and have two more to mix up, but have to stop and rinse out stuff before you can mix the next batch. Im done with all three. With the cylinders it will take you about 15 minutes or more to mix up the three 15 ml bottles. I am all done in 5 minutes with scale and no eye strain squinting at those graduate lines, no math figuring out where on the graduated line I need to be after each ingredient. Its just so much simpler by scale and so much more exact.
Interesting and very helpful, I have the equipment to do that as we make our own bread, never really thought of doing it by weight before, makes perfect sense though. Thanks..Even my ejuice calculator has the grams next to it, light bulb moment, why on earth have I never thought of this before :facepalm:
 

Debadoo

ECF Guru
ECF Veteran
Verified Member
May 18, 2012
18,052
133,969
Texas, near Fort Hood
My DIY tools are pretty simple but I've found it's all I need

8yu8m9.jpg

Ignore that silly tall measuring thing though, it's pretty much useless, the VG sticks to it and you end up with completely the wrong measurements.. The 100ml syringe is great for VG, the little one for PG, Flavorings and Nic, it's that simple.

This little syringe is also great for filling tanks...
2mq7t4j.jpg
Mine is similar. I use a glass measuring cup to mix up 500 mls of unflavored nic base at 24m. I will now us my 60 ml syringe (pouring in the top) to measure out base into my bottles, then a 1 ml syringe no needles to add in my flavors. When I break down a liter of nic, I measure it out into 120 ml bottles and put those back in the freezer. When I mix my base, I pull one out, dump it in the jar. Measure out pg and vg with pyrex measuring cup....stir...done.

hit tare and .47 nicotine, next bottle hit tare and .47 grams nicotine. Hit tare again and first ingredient, is fruit. add 1.5 grams of fruit, next bottle hit tare and add 1.5 ml of a different fruit flavor, next bottle hit tare and another 1.5 grams of fruit flavor. Same bottle, tare to zero and .3 grams of marshmellow
I've been very interested in doing it by weight, but don't have a scale, or right now even the $ to get one. How many mls, or part of a ml would 1.5 grams, or .3 grams = out to? I am a bit leary of using pipettes. The 3ml pipettes would be easier to clean than a 1 ml probably, but you can't dry them out so I wonder about bacteria from the flavorings. I have a very hard time squeezing some of the flavoring bottles which is why I don't use drops. I take the dripper cap off and stick the syringe (no needle) into the flavoring bottle, or just pour it in with my lil finger over the tip of syringe
 

Rixsta

The Millionaire Vapor' The Enabler
ECF Veteran
Verified Member
Apr 8, 2015
6,590
39,924
49
Somerset, UK
Mine is similar. I use a glass measuring cup to mix up 500 mls of unflavored nic base at 24m. I will now us my 60 ml syringe (pouring in the top) to measure out base into my bottles, then a 1 ml syringe no needles to add in my flavors. When I break down a liter of nic, I measure it out into 120 ml bottles and put those back in the freezer. When I mix my base, I pull one out, dump it in the jar. Measure out pg and vg with pyrex measuring cup....stir...done.


I've been very interested in doing it by weight, but don't have a scale, or right now even the $ to get one. How many mls, or part of a ml would 1.5 grams, or .3 grams = out to? I am a bit leary of using pipettes. The 3ml pipettes would be easier to clean than a 1 ml probably, but you can't dry them out so I wonder about bacteria from the flavorings. I have a very hard time squeezing some of the flavoring bottles which is why I don't use drops. I take the dripper cap off and stick the syringe (no needle) into the flavoring bottle, or just pour it in with my lil finger over the tip of syringe

Make a mock recipe here and it will do it all for you, you will see better than me trying to explain...pretty sure for pg if it's 3ml, then it's 3g, with nic and vg being slightly heavier..

e-Liquid Calculator :: New recipe
 

chopdoc

Vaping Master
ECF Veteran
Verified Member
Aug 30, 2014
3,292
12,571
Independence, Louisiana, United States
Mine is similar. I use a glass measuring cup to mix up 500 mls of unflavored nic base at 24m. I will now us my 60 ml syringe (pouring in the top) to measure out base into my bottles, then a 1 ml syringe no needles to add in my flavors. When I break down a liter of nic, I measure it out into 120 ml bottles and put those back in the freezer. When I mix my base, I pull one out, dump it in the jar. Measure out pg and vg with pyrex measuring cup....stir...done.


I've been very interested in doing it by weight, but don't have a scale, or right now even the $ to get one. How many mls, or part of a ml would 1.5 grams, or .3 grams = out to? I am a bit leary of using pipettes. The 3ml pipettes would be easier to clean than a 1 ml probably, but you can't dry them out so I wonder about bacteria from the flavorings. I have a very hard time squeezing some of the flavoring bottles which is why I don't use drops. I take the dripper cap off and stick the syringe (no needle) into the flavoring bottle, or just pour it in with my lil finger over the tip of syringe

If you can buy a premium bottle of juice like Mothers milk then you can afford a decent digital scale. Last time I bought a 30ml bottle of mothers milk it was $25 and a scale like a LB-501 (google it) cost $25 on Amazon. You can also get a bag of 15ml or 20 ml bottles and the ones you have that are hard to squeeze, pop the cap off them and pour it into an easy botle to squeeze. Just remember to mark what it is. :D
What I do with my pipettes is I will keep them in a small cup pointing down so any liquid can drain and a paper towel in the bottom of the cup. Gravity and the blotting action of the paper towel does the rest. And ml usually equals grams when flavorings are PG based, 1.5 ml = 1.5 grams.
 

Debadoo

ECF Guru
ECF Veteran
Verified Member
May 18, 2012
18,052
133,969
Texas, near Fort Hood
Make a mock recipe here and it will do it all for you, you will see better than me trying to explain...pretty sure for pg if it's 3ml, then it's 3g, with nic and vg being slightly heavier..

e-Liquid Calculator :: New recipe
I dl'd that one but haven't used it yet. ejuicemeup does grams too, but the weight isn't entered for the things yet. I'll check with some folks on the porch that measure by weight to see what weights they use for nic, pg, vg and flavorings.

If you can buy a premium bottle of juice like Mothers milk then you can afford a decent digital scale. Last time I bought a 30ml bottle of mothers milk it was $25 and a scale like a LB-501 (google it) cost $25 on Amazon
the most I ever spent on juice was 14.00 for 30 mls but have been diy'ing for close to a year cuz even that got to be too much. That scale can be zero'd out? I'll put that in my wish list. yeah, good point about the pipettes. I really prefer glass and eventually would like my flavorings in glass, but again that's on a wait list. Got some other things I need first, but will likely be using a scale at some point. Been thinkin about it for awhile.
 

chopdoc

Vaping Master
ECF Veteran
Verified Member
Aug 30, 2014
3,292
12,571
Independence, Louisiana, United States
I dl'd that one but haven't used it yet. ejuicemeup does grams too, but the weight isn't entered for the things yet. I'll check with some folks on the porch that measure by weight to see what weights they use for nic, pg, vg and flavorings.


the most I ever spent on juice was 14.00 for 30 mls but have been diy'ing for close to a year cuz even that got to be too much. That scale can be zero'd out? I'll put that in my wish list. yeah, good point about the pipettes. I really prefer glass and eventually would like my flavorings in glass, but again that's on a wait list. Got some other things I need first, but will likely be using a scale at some point. Been thinkin about it for awhile.

When you hit the "tare" button that zero out the scale. You can have a bottle half full on the scale and hit the tare and it will read zero.

When you get a scale dont buy one of those gas station style ones. One like I mentioned (which is exact one I have and was recommended to me by guys on ECF) will read .00 A drop of flavoring weighs about .03 so the .00 function is needed when DIYing by weight.
 

Debadoo

ECF Guru
ECF Veteran
Verified Member
May 18, 2012
18,052
133,969
Texas, near Fort Hood
When you hit the "tare" button that zero out the scale. You can have a bottle half full on the scale and hit the tare and it will read zero.

When you get a scale dont buy one of those gas station style ones. One like I mentioned (which is exact one I have and was recommended to me by guys on ECF) will read .00 A drop of flavoring weighs about .03 so the .00 function is needed when DIYing by weight.
kewl. Thanks for the help, appreciate it. Just put that scale and some pipettes on my wishlist.
 
Status
Not open for further replies.

Users who are viewing this thread