To dry burn or not to dry burn. That's the question. It always gets me confused.

Status
Not open for further replies.

DaveP

PV Master & Musician
ECF Veteran
May 22, 2010
16,733
42,645
Central GA
Hi Dave, let us know when you finish :lol:

I'm surprised that the powers that be haven't already picked apart everything that's contained in vaping products and tested them six ways to Sunday. We had that one little cursory test in 2009 by the FDA and they found 8ng/dl traces of carcinogens in an Njoy or Smoking Everywhere sample and a trace of diethylene glycol in a spectrographic test. Their control test was one done on a Nicotrol inhaler, which had the same amount of nitrosamines.

Depending on who you read, silica is very bad or not so much. If the fibers don't break down and pass into the lungs, it seems to be a moot point. You can rub the wicks on a Vivi head and pull off 1/2" to 3/4" fibers when it's dry. IF you want a rope to be stronger with more cohesive fibers, wet it down.

It's just my own hunch, but the wetting effect of juice on a wick should hold down most of the fiber shedding. I don't know that for sure, but it makes sense to me. Add to that the fact that the coil is wrapped around the part that air passes through and it captures the long strands. I may be completely off base and I'll admit that I'd feel better if the wick were a different material, but I've not worried about shedding so much.

I'd like to see extensive lab quality testing, though.

ETA: You have to wonder how many of us have inhaled asbestos fibers over the years from the times when asbestos was used widely in brake linings on cars. I didn't know that cars had cabin filters until one day when the Jiffy Lube guy told me our Explorer needed a new cabin filter. You have to wonder why car makers found it necessary to add that little replaceable part. Maybe they found that we were inhaling rubber residue and who knows what from the road.
 
Last edited:

Katya

ECF Guru
Supporting Member
ECF Veteran
Verified Member
Feb 23, 2010
34,804
120,147
SoCal
Remember those? :facepalm:

978.jpg
 

Neofolis

Full Member
Verified Member
Oct 21, 2012
36
7
55
United Kingdom
I haven't used clearo's for a while but getting a gunked coil is an issue whatever you use. Some juices tend to gunk coils really quickly, particularly the ones that use a natural tobacco leaf steeping process. I would say experiment with different juices, because clearo's are not the easiest to get the coils clean or switch to something that is either easier to clean or is rebuildable/has changeable heads.
 

Zippoz

Senior Member
ECF Veteran
Apr 1, 2013
96
61
PNW
Hello all, I've been lurking a long time and finally got an account. I tried dry burning my ViVi heads several times, following instructions to the letter (I think), and every time I get this TERRIBLE dry, acrid hit. It tastes and smells like burning material. I've taken to simply blowing through my nose first without inhaling to test the hit. Every time, it's been an epic fail. Ruined several heads this way and I'm getting really ...... off. Any suggestions? I'm just using a smok 900mah passthrough and a 2.4ohm head.

Thanks
 

Katya

ECF Guru
Supporting Member
ECF Veteran
Verified Member
Feb 23, 2010
34,804
120,147
SoCal
Hello all, I've been lurking a long time and finally got an account. I tried dry burning my ViVi heads several times, following instructions to the letter (I think), and every time I get this TERRIBLE dry, acrid hit. It tastes and smells like burning material. I've taken to simply blowing through my nose first without inhaling to test the hit. Every time, it's been an epic fail. Ruined several heads this way and I'm getting really ...... off. Any suggestions? I'm just using a smok 900mah passthrough and a 2.4ohm head.

Thanks

Don't dry burn. Soak in vodka for a few hours to clean some of the gunk and reinstall. Rinse and repeat. Then grab a fresh coil!
 

Zippoz

Senior Member
ECF Veteran
Apr 1, 2013
96
61
PNW
Don't dry burn. Soak in vodka for a few hours to clean some of the gunk and reinstall. Rinse and repeat. Then grab a fresh coil!

I feared as much. Thanks! Unfortunately everyone seems sold out of them atm because of the CNY... I guess I'll have to buy an ohm-meter and some wire and start coiling myself. I was able to successfully make a coil with 32ga nichrome I had kicking around for making rocket igniters, but the damn thing burned every time... I tried 4,5,6,7, and 8 coils before I ran out of room. Resistance was too high :(. Good news is, I've got some ancient undyed, unbleached cotton string....
 
Last edited:

Katya

ECF Guru
Supporting Member
ECF Veteran
Verified Member
Feb 23, 2010
34,804
120,147
SoCal
I feared as much. Thanks! Unfortunately everyone seems sold out of them atm because of the CNY... I guess I'll have to buy an ohm-meter and some wire and start coiling myself. I was able to successfully make a coil with 32ga nichrome I had kicking around for making rocket igniters, but the damn thing burned every time... I tried 4,5,6,7, and 8 coils before I ran out of room. Resistance was too high :(. Good news is, I've got some ancient undyed, unbleached cotton string....

Yeah, the stores are empty. I can't be CNY--it ended a long time ago. I have no idea what's up with that. People are stockpiling?

You're brave. The idea of making my own coils doesn't really appeal to me. :shock: Are you looking for ViVi Nova coils?

Vivi Nova Replacement Coil Head
 
Last edited:

Zippoz

Senior Member
ECF Veteran
Apr 1, 2013
96
61
PNW
Yeah, the stores are empty. I can't be CNY--it ended a long time ago. I have no idea what's up with that. People are stockpiling?

You're brave. The idea of making my own coils doesn't really appeal to me. :shock: Are you looking for ViVi Nova coils?

Vivi Nova Replacement Coil Head


Thanks! Perhaps they are stockpiling like everyone has been with guns and ammo? Everyone is sold out of a lot of stuff, especially gotvapes/madvapes. It is a little eerie. Eh, making coils for the nova takes like 5 minutes. Well worth it for me when the materials are so cheap. That, and I HATE waiting for things to come in the mail.
 
Status
Not open for further replies.

Users who are viewing this thread