Tootle Puffers, Part Three! (The Sequel of the Redux)
- Thread starter Katdarling
- Start date
- th_trl_thread_readers 0
Yes I've seen that one looks nice... the ml factor might be a problem for me.. need a little more for when I'm out.. like to travel without ejuice if possible.. I opt for a icare or Von Earl as a back up when I'm out. Rarely need it with the KF5.. but what I'm looking for does not need to be that big..
Whatcha got? Hmmmm?
This is why I stocked up on the old school ones I love with lots of spares (KFL, Spheroid, Erl nano, Squape).
I like a uber tight draw but if the KF5 is doing it for you I would suggest checking out these:
$21.76 Tilemahos V2 Plus Styled RTA Rebuildable Tank Atomizer - 4ml / 304 stainless steel + PC / 22mm diameter at FastTech - Worldwide Free Shipping
$14.97 KA V6 Styled RTA Rebuildable Tank Atomizer - 3ml / stainless steel + acrylic at FastTech - Worldwide Free Shipping
$14.00 SXK Doggy Styled RTA Rebuildable Tank Atomizer - 3.5ml / stainless steel + PC / 22mm dia. at FastTech - Worldwide Free Shipping
$30.99 EVL Reaper Styled RTA Rebuildable Tank Atomizer - 3.5ml / titanium alloy + glass at FastTech - Worldwide Free Shipping
$13.77 Phenomenon Lite Styled RTA Rebuildable Tank Atomizer - 4ml / 316 stainless steel + acrylic at FastTech - Worldwide Free Shipping
That what I'm looking for super tight draw... I have the reducer kit in it and it's good but, I recently tried that 2$ , 3.1 KF3 clone... the draw was super tight and amazing...now I want something like that...but the clone is a piece of junk $2 yeah, I New that getting into it. It's a pain in the .... due to the fact you can't access the deck.. and it looks crazy huge on everything... the vapor might be stealthy but the tank will cause some attention.
What is that?Your the Fastech master wow
That what I'm looking for super tight draw... I have the reducer kit in it and it's good but, I recently tried that 2$ , 3.1 KF3 clone... the draw was super tight and amazing...now I want something like that...but the clone is a piece of junk $2 yeah, I New that getting into it. It's a pain in the .... due to the fact you can't access the deck.. and it looks crazy huge on everything... the vapor might be stealthy but the tank will cause some attention.
Your the Fastech master wow
On one of those cheap-o $2 clones I'm unable to trap the leads
Sent from my iPhone using Tapatalk
Love me some FT!!That what I'm looking for super tight draw... I have the reducer kit in it and it's good but, I recently tried that 2$ , 3.1 KF3 clone... the draw was super tight and amazing...now I want something like that...but the clone is a piece of junk $2 yeah, I New that getting into it. It's a pain in the .... due to the fact you can't access the deck.. and it looks crazy huge on everything... the vapor might be stealthy but the tank will cause some attention.
Your the Fastech master wow
Have you see the pieces described by @Two_Bears to build the KF slam cap. Cheap as chips and vapes exactly like you describe:
$1.69 Replacement Acrylic Bell Cap for Kayfun Mini RTA Atomizer at FastTech - Worldwide Free Shipping
$2.26 Replacement Five Pawns Styled Chimney for Kayfun RTA - stainless steel at FastTech - Worldwide Free Shipping
$4.00 Replacement Base for 22mm Kayfun Lite Plus V2 & Kayfun Lite Five Pawns - stainless steel at FastTech - Worldwide Free Shipping
That right there will build you a killer uber tight atty.
There are several other cools configs but that is a basic killer!
Replace cheap KF clones deck screws with:
https://www.amazon.com/gp/product/B00917TWNO/ref=oh_aui_detailpage_o03_s01?ie=UTF8&psc=1
That's what's in the picture I posted a page back.
Sent from Uranus using Tapatalk
Thanks! Do you happen to know the specs so I can choose the correct one?
Sent from my iPhone using Tapatalk
The juice channels on the deck on both I got are not fully connected, so it's finicky.. have to drain the juice to check the deck... one of the fill port holes leaks on one... could be fixable.... just not worth the hassle.... if it was a car it would be declared totaled. Lol.
My bad:
M1.6-0.35 X 3MM
Hmmm...perhaps I'm blind (I forgot my glasses today? but I don't see it
ETA: never mind!
Sent from my iPhone using Tapatalk
I use 3mm so might want to grab both sizes and see which one prefer/works
Mr Texas is correct... M1.6-0.35x3mm
I had stated incorrect length, unless you're using 20ga wire
https://www.amazon.com/gp/product/B00917TWNO/
Are those the exact ones you have gotten before?
I've tried looking for something like that before it with all the diff KFL+ decks and top caps it get overwhelming on fastech to decide... then I usually get nothing... cuz it would be heartbreaking to wait that long for it and it turns out to be junk cuz I picked the wrong ones..
Any other little accessories you like for this little kit?
I prefer black parts for the KFL Bellcapenstein, but there's also this on FT. Not sure how it compares to piecing the parts together, but it's all there: $6.31 Kayfun Mini Styled RTA Rebuildable Tank Atomizer (2.5ml) - stainless steel + acrylic / 22mm diameter at FastTech - Worldwide Free Shipping
I have that exact kit and it works perfectly.
I also use and approve the following base:
$4.31 Replacement Base for Kayfun Lite Plus - stainless steel / black plated at FastTech - Worldwide Free Shipping
I have 6 of those coming and I don't expect them to be around much longer, as the SS one is gone already.
I also like a configuration that gives this look:
You will need these parts to complete that config:
$2.51 Replacement Top Cap for Kayfun Lite Five Pawns RTA Atomizer - w/ 510 drip tip / stainless steel at FastTech - Worldwide Free Shipping
or black
$2.63 Replacement Top Cap for Kayfun Lite Five Pawns RTA Atomizer - w/ 510 drip tip / stainless steel at FastTech - Worldwide Free Shipping
$3.22 Replacement PC Tank for Kayfun V4 & Kayfun Lite Five Pawns (5-Pack) at FastTech - Worldwide Free Shipping
and you will need the longer chimney cap, not the nano:
$1.10 Replacement Chimney Cap for Kayfun Lite Five Pawns - stainless steel at FastTech - Worldwide Free Shipping
Similar threads
- Locked
