Tootle Puffers, Part Three! (The Sequel of the Redux)

[classwife]

When I got that hutch from my sister (almost a year ago) I just shoved stuff in there to get it off the table and the kitchen counters.

Sadly it is still in 'shoved condition'.

My dining table is in front of it and it makes it difficult to get in there to the cabinets.
I could get the dining table moved out a bit...but then the light wouldn't be centered over it - and that would drive me nutso !
And I need some boxes. I want the heavy boxes that good envelopes come in.

 

[DancingHeretik]

I've been keeping my purchases in two cabinets of my dining room china cabinet. I emptied them because I could no longer tell what I had or if I needed "anything."

Houston, I think I have a problem!

Those boxes are all full!!!

Then I decided to "use up" some non-replaceable battery mods, because I don't think that they will last the long haul.

Still a problem.

My husband has just declared me a hoarder.

Nice collection! Just show him the difference between what you've spent and what you've saved from not smoking.

 

[DancingHeretik]

When I got that hutch from my sister (almost a year ago) I just shoved stuff in there to get it off the table and the kitchen counters.

Sadly it is still in 'shoved condition'.

My dining table is in front of it and it makes it difficult to get in there to the cabinets.
I could get the dining table moved out a bit...but then the light wouldn't be centered over it - and that would drive me nutso !
And I need some boxes. I want the heavy boxes that good envelopes come in.

Well, you're just gonna have to fix that! You have a duty to organize and take a picture of the display for your fellow ECFers to ogle over!

 

[corn flakes]

I've been keeping my purchases in two cabinets of my dining room china cabinet. I emptied them because I could no longer tell what I had or if I needed "anything."

Houston, I think I have a problem!

Those boxes are all full!!!

Then I decided to "use up" some non-replaceable battery mods, because I don't think that they will last the long haul.

Still a problem.

My husband has just declared me a hoarder.


Sent from my iPhone using Tapatalk

I would call that a good start.

My daily rotation has that amount in it.

Need to clear another shelf in the basement of the next round of purchases.

 

[lil_buddy]

I've been keeping my purchases in two cabinets of my dining room china cabinet. I emptied them because I could no longer tell what I had or if I needed "anything."

Houston, I think I have a problem!

Those boxes are all full!!!

Then I decided to "use up" some non-replaceable battery mods, because I don't think that they will last the long haul.

Still a problem.

My husband has just declared me a hoarder.


Sent from my iPhone using Tapatalk

that orange ego one thing is so cute. I really want one.

 

[pokemom]

Stupid question, can I fill the KF bellcap stubby from the top (where the drip tip fits) without it flooding out? Or do I have to unscrew the bottom? I fear that the whole thing will come apart if I unscrew it from the bottom. The chimney chamber seems to unscrew as well.

 

[DancingHeretik]

Stupid question, can I fill the KF bellcap stubby from the top (where the drip tip fits) without it flooding out? Or do I have to unscrew the bottom? I fear that the whole thing will come apart if I unscrew it from the bottom. The chimney chamber seems to unscrew as well.

You can supposedly fill it from the bottom IF you screw the chimney chamber onto the bellcap well enough.

Personally, I don't apparently screw it on well enough and it comes loose. So, I just use the bottom fill screw, just like any other KFL.

 

[jaytex1969]

Quality fries made from fresh spuds and cooked in peanut oil deserve a fine malt vinegar.

The rest, the inferior fries, die in a pool of ketchup.


(He likes KETCHUP KETCHUP KETCHUP...)



Jay

 

[misswish1]

Stupid question, can I fill the KF bellcap stubby from the top (where the drip tip fits) without it flooding out? Or do I have to unscrew the bottom? I fear that the whole thing will come apart if I unscrew it from the bottom. The chimney chamber seems to unscrew as well.

Like Dancing said, screw in the chimney then give it a little extra (but don't break it). Don't fill it yet - unscrew the base and see if the chimney stays in the bellcap. If it stays, then you can fill and use it. If it doesn't stay, tighten it more. I haven't had a problem with it at all. You can't fill it from the top.

 

[Plettschner]

Stupid question, can I fill the KF bellcap stubby from the top (where the drip tip fits) without it flooding out? Or do I have to unscrew the bottom? I fear that the whole thing will come apart if I unscrew it from the bottom. The chimney chamber seems to unscrew as well.

I screwed the chimney part snug into the bellcap with needlenose pliers and unscrew bottom to fill, rewick, coil, etc. I have had an instance of it loosening up though, so I always pay attention to what it turning when I loosen the base.

ETA: No, you can't fill through the drip tip hole, it will just fill the chimney and come out the airhole.

 

[ToolmanTexas]

And if looking for a tank that is very similar to the kf nano, pick up an sxk doggy style... It's chimney is screwed into the top piece so is made to do what we have done w the nano kf all this time.

 

[RainSong]

And if looking for a tank that is very similar to the kf nano, pick up an sxk doggy style... It's chimney is screwed into the top piece so is made to do what we have done w the nano kf all this time.

I'm thinking I'm going to give one of these a try on my next FT order.

 

[Plettschner]

And if looking for a tank that is very similar to the kf nano, pick up an sxk doggy style... It's chimney is screwed into the top piece so is made to do what we have done w the nano kf all this time.

I like the SXK Doggystyle, but after using both, for me the KFL Bellcap wins for flavor and for not having an AFC ring. The design of the Doggystyle is excellent though.

 

[classwife]

What is the KFL Bellcap please ?

 

[Plettschner]

What is the KFL Bellcap please ?

Kayfun Lite+ base with a bellcap tank.

Sent from Uranus using Tapatalk!

 

[oplholik]

Or one of these. $1.48 Acrylic Kayfun Bell Cap - 34mm height at FastTech - Worldwide Free Shipping

 

[ChelsB]

Finally caught back up again.

I'm working on getting caught up. Hopefully everyone has had a great weekend!


Sent from my iPhone using Tapatalk

 

[ChelsB]

Turn the tank over and look at the bottom of the 510 connection. It looks like a screw top, yes? Unscrew that and take the tank apart. It can be a pita so just letting you know. I liked the nectar's but not enough air flow for me. My cotton tails went all the way to the bottom. How thick is your ejuice? That may be the culprit for the lower vapor.

I never even thought of the juice. I'm using max vg. I'll try a thinner juice and he how that works


Sent from my iPhone using Tapatalk

 

[Sugar_and_Spice]

I never even thought of the juice. I'm using max vg. I'll try a thinner juice and he how that works


Sent from my iPhone using Tapatalk

The reason for lack of vapor(as I understand it) is no air flow, or at least not enough air flow for max vg. The nectar has no air flow to speak of, so no way of controlling it. Akin to sucking a thick milkshake through a straw.

 

[Sugar_and_Spice]

Or one of these. $1.48 Acrylic Kayfun Bell Cap - 34mm height at FastTech - Worldwide Free Shipping

Or a complete tank--they have several colors.

$5.43 Kayfun Monster Mini V3 Styled RTA Rebuildable Tank Atomizer (2.5ml) - stainless steel + acrylic / 22mm diameter at FastTech - Worldwide Free Shipping