Tootle Puffers, Part Three! (The Sequel of the Redux)

[cats5365]

@ChelsB I'm so glad to see you are back in your own house and posting again.

I hope your neighbors were spared as well and that your neighborhood gets back to normal quickly.

 

[Two_Bears]

there is BRA for some nautilus tanks not sure they fit the kabuki.

Thanks...Always learning...I thought there was a buildable deck for the Kabuki...And with me it's the lack of dexterity in my hands plus my eyes aren't getting any younger...I am going to wait and see on the innokin...

 

[ChelsB]

I couldn't resist a kitty hand check!

 

[ChelsB]

TB...Regarding the Siren 2...I just got an email from MFS this morning...Sniff'in for my Doe-Ra-Me $$$
Siren V2 22mm GTA Tank by Digiflavor
Eyyy...$32 for a tank is rich for my budget...I do so like my $10 T22's !!!......Like the look of the deck...There's something about it that makes it "Appear" easier...But what do I know...Just a feeling about its look...I did give a quick look at FT and they want $38...

EDIT: Hmmm...FT Coupon @ Check-Out takes'em down to $25ish...

Just got the shipment notification a few days ago for my Siren v2. It's been quite a long wait, the anticipation is high!
$25 ish is similar to what I paid

 

[petrotech]

Hi everyone!
I'm happy to report that I'm safe at home . Currently, I'm enjoying myself immensely tinkering in my craft room with vape stuff!
I hope you've all been well.
I can't get over how lucky I am to have escaped, losing only one tree from the wind and meats and dairy items from the prolonged power outage.
I have missed my almost daily visits here and am glad to be back!
Oh, and this beautiful glass for my STM was waiting in my mailbox for me!

my daughter calls owl "hooters" (believe it or not, my wife taught her that, not me). I showed her this picture and she said, "she has pretty hooters". lmao. glad you're home safe and sound!

 

[ChelsB]

my daughter calls owl "hooters" (believe it or not, my wife taught her that, not me). I showed her this picture and she said, "she has pretty hooters". lmao. glad you're home safe and sound!

Bwahahaha!!! That's awesome!

 

[Bea-FL]

Hi everyone!
I'm happy to report that I'm safe at home . Currently, I'm enjoying myself immensely tinkering in my craft room with vape stuff!
I hope you've all been well.
I can't get over how lucky I am to have escaped, losing only one tree from the wind and meats and dairy items from the prolonged power outage.
I have missed my almost daily visits here and am glad to be back!
Oh, and this beautiful glass for my STM was waiting in my mailbox for me!

Sweetie I'm so happy you and yours are safe and your house is intact…great news!!!

And I'm in love with this STM glass. Those are barn owls…my favorite owl species. I raised one from day one back in the days when I worked at the Cincinnati Zoo for education purposes and built her a 30' foot long cage on my property where she lived. I don't have an STM nor plan to buy one but I want this glass. Can you give me a link please?

 

[misswish1]

Yay, Chels, so glad you are all home and safe!

 

[brewbear]

Been fixin' stuff around the house for so many years .... I'M TIRED OF FIXIN' STUFF !!!!

I just started....I finished mom's and MIL guest houses and now I'm finishing the main house! I certainly didn't know what I was doing when I tore out the cabinets in the kitchen, mine and wife's bathrooms and closets in both bedrooms.
Two and a half years later, I'm varnishing the doors and I'm done. In my journey I learned a lot, I made all the cabinets in maple, wife's bathroom was completely redone, my bathroom was completely redone. The closets now look like built in old fashion three door armoires and have aromatic cedar lining. Not bad for someone working full time......

 

[brewbear]

there is BRA for some nautilus tanks not sure they fit the kabuki.

Me thinks that should be RBA rather than BRA and yes, they do fit the Kabuki.

 

[Two_Bears]

it Should indeed. I typed R B A twice and ***** spell correct changed it on me.

I put the letters together and or comes out as you saw it. :-(

Me thinks that should be RBA rather than BRA and yes, they do fit the Kabuki.

 

[englishmick]

Today I did something I’ve been thinking about for months.

Always worried about using a KFL on an unregulated mod. The 510 pin on the tank is flush with the housing or sometimes even recessed a little. Seemed dodgy to me. Like there must be a really tiny gap between the mod pin and the 510 housing on the tank. The pin on a Silver Bullet seems quite wide.

Someone suggested shaving back the housing until the pin sticks out a bit. Today I tried it, ground the bottom of the 510 housing on one of those diamond grit knife sharpening stones. Turned out it was easy to keep it flat against the stone and it went quite fast. I didn’t take much off. The pin sticks out maybe 1/32nd.

I’ve been vaping on it tonight and don’t have to worry any more.

 

[Bea-FL]

I just started....I finished mom's and MIL guest houses and now I'm finishing the main house! I certainly didn't know what I was doing when I tore out the cabinets in the kitchen, mine and wife's bathrooms and closets in both bedrooms.
Two and a half years later, I'm varnishing the doors and I'm done. In my journey I learned a lot, I made all the cabinets in maple, wife's bathroom was completely redone, my bathroom was completely redone. The closets now look like built in old fashion three door armoires and have aromatic cedar lining. Not bad for someone working full time......

My hat off to you. Congratulations!! I bet your house looks beautiful!

I've rehabbed many pieces of antique furniture. Soooooo, I would love to see photos of those closet doors if you don't mind sharing.

 

[brewbear]

it Should indeed. I typed R B A twice and ***** spell correct changed it on me.

I put the letters together and or comes out as you saw it. :-(

Just teasing you, TwoBears, from one bear to another.

 

[Two_Bears]

I Just don't use much moods. I am satisfied with my KFL+V2

Today I did something I’ve been thinking about for months.

Always worried about using a KFL on an unregulated mod. The 510 pin on the tank is flush with the housing or sometimes even recessed a little. Seemed dodgy to me. Like there must be a really tiny gap between the mod pin and the 510 housing on the tank. The pin on a Silver Bullet seems quite wide.

Someone suggested shaving back the housing until the pin sticks out a bit. Today I tried it, ground the bottom of the 510 housing on one of those diamond grit knife sharpening stones. Turned out it was easy to keep it flat against the stone and it went quite fast. I didn’t take much off. The pin sticks out maybe 1/32nd.

I’ve been vaping on it tonight and don’t have to worry any more.

 

[Katdarling]

???...How many extra "Decks" to you keep pre-built or do you just keep extra coils ready to go and do you ever pre-wick your coils ???...When I start scheming and planning my head hurts...I think I'll go have lunch...

Trigs, when I decide to temporarily retire a tank, I clean it out completely, and wick and wire it as need be. Then it's in my "READY" file.

Pluck and go!

there is BRA for some nautilus tanks not sure they fit the kabuki.

Mmm hmmm......... go on.

(seems you might need an owl tank for those Nautis)

I couldn't resist a kitty hand check!

Love the bling, Chelzie! Looks AWFULLY familiar...

(glad you're safe and sound, girl)

 

[Two_Bears]

I figured as much. just wanted it out there that I tried to post the correct sequence.

Just teasing you, TwoBears, from one bear to another.

 

[DavidOck]

I figured as much. just wanted it out there that I tried to post the correct sequence.

Uh huh. Sure you did...

 

[Two_Bears]

aparrently Kat, you and others never heard the saying NEVER POKE A BEAR!

Uh huh. Sure you did...

 

[brewbear]

My hat off to you. Congratulations!! I bet your house looks beautiful!

I've rehabbed many pieces of antique furniture. Soooooo, I would love to see photos of those closet doors if you don't mind sharing.

I still have a lot to do before I consider it done. The closet doors are done in shaker style, I used birch for this one.