This makes sense. Going to trim it a bit maybe a 1 mm or so . I will see how it goes.
Tootle Puffers, Part Three! (The Sequel of the Redux)
- Thread starter Katdarling
- Start date
- th_trl_thread_readers 0
I prefer to wick this way.
I want the cotton tight but still able to slide in the coil.
if you have the cotton too tight. When the cotton swells with ejuice it becomes too tight to wick properly.
I want the cotton tight but still able to slide in the coil.
if you have the cotton too tight. When the cotton swells with ejuice it becomes too tight to wick properly.
Just trimmed the wick. Got The tank half filled. I just took a little bit off. Just a trim. I will let you know how it goes.
I'm an RDA guy...but the goblin mini is one of the few tanks i actually use. great flavor.
So far so good. A little gurgily but clearing up. I did not saturate it when I pit it back together. Will let you know in an hour or so.
GREAT!!
Thank you peeps for all of your help. It' still working great.
Well. My EhPro Dynast (mech mod) came in today with my Big Buddha RDA. I don't know if you can call it an RDA exactly. You don't drip it. It's basically a large dual coil version of the Kayfun. Reminds me of the KF5 clone I just got in. I put a 0.80 Ohm build on it and some fluffy, fluffy cotton. I'm puffing on it as I type. No leaks yet. I watched a few videos over the weekend while I was waiting for it to come in and followed their advice. I don't have any 26650's to put in the thing. But it has a Delrin sleeve that allows you to use an 18650 and I'm tootling along at 5.25 Amps, 22.05 Watts on a full charge so my 18650 is fine with it for now. I should notice a drop off in vape production as it goes down so I shouldn't over discharge the thing. I wanted to hit 0.9 or so Ohms to make sure that happened, but I think it will be fine. It really does vape a lot like the Kayfun. The airflow is pretty nice. The flavor is right there. The clouds are satisfying.
Fantastic flavor. the Silverplay Nano was just as good.
I still have one Silverplay Nano. only reason I stopped using it I missed the old MTL VAPING
I still have one Silverplay Nano. only reason I stopped using it I missed the old MTL VAPING
Filled up the Berserker. Left it for 10 hours and no leaks! A little gurgily but it went away. I am a happy camper. Just thought I would share.
Thinking you meant RTA. I have a Big Buddha paired with my Seven-22.
Sent from my SAMSUNG-SM-N910A using Tapatalk
I am loving my Berserker!
What is a really good 22 mm RTA that is MTL. Low wattage that would look really sharp on a Aspire X30 Rover? Has to be real easy to rebuild?
kayfuns are nice.
I use a Kompact Kayfun as seen in my avatar.
it has four pieces.
Kayfun Lite Plus V2.
bottom half of chimney
25 mm tall bell cap
Standard drip tip.
I use a Kompact Kayfun as seen in my avatar.
it has four pieces.
Kayfun Lite Plus V2.
bottom half of chimney
25 mm tall bell cap
Standard drip tip.
3f has the KF lite plus and the Doggystyle. You can get them both for less than 25 bucks. Both are rock solid. I used a Dremel on the juice channels of the KF lite because my juice is thick.
There is also KF primes listed but I'm not sure if those are shipping yet, mine hasn't. Those should wick much like your Beserker.
Sent from my XT1650 using Tapatalk
The acronyms always trip me up. I'm never sure which set ups they are referring to. Let me take a stab at it and help me out where I make mistakes:
RBA: ReBuildable Atomizer. You supply the cotton, and the coil(s) that is attached to a positive and negative post on the deck
RDA: Rebuildable Drip Atomizer. An RBA where the juice is supplied by dripping it onto the coil through the drip tip
RTA: Rebuildable Tank Atomizer. An RBA where the juice is supplied by a tank that is designed so that the wick is in direct contact with the juice.
BF or squonker: An RBA with a hollow 510 pin that allows the juice to be Bottom Fed from a reservoir to the deck in order to make contact with the wicks
So you can use RDA/RDA/BF to describe any RBA? And then you can use RBA to differentiate the device from a tank that uses premade atomizers?
By the way I just put my Big Buddha on my old Fuchai and it doesn't look as stupid as I thought it would. It still looks stupid, but not as stupid as I thought it would.
can you buy stuff at 3F with Pay Pal?
last week I tried to get a Vika Fantasy with coils . almost immediately it went to restocking.
I need to get supplies.
last week I tried to get a Vika Fantasy with coils . almost immediately it went to restocking.
I need to get supplies.
Similar threads
- Locked
