Tootle Puffers, Part Three! (The Sequel of the Redux)

Bea-FL

Vaping Master
ECF Veteran
Verified Member
Jul 7, 2016
3,094
62,467
Florida
Anyone have any suggestion about this problem with the Kanger? The thing is I really like its size and shape and hope this juice thing can be resolved. I can't believe a company as reputable as Kanger would release a device with this problem. I'll try to contact thrm and see what they say.

I took out the coil, cleaned it, rescrewed it in and I noticed that the 2 juice intake holes are really large so I plugged one. No change :(…a mouthfull of juice regardless if I suck lightly or not.
 
Last edited:

NolaMel

ECF Guru
ECF Veteran
Verified Member
Nov 17, 2012
12,815
80,994
New Orleans
Anyone have any suggestion about this problem with the Kanger? The thing is I really like its size and shape and hope this juice thing can be resolved. I can't believe a company as reputable as Kanger would release a device with this problem. I'll try to contact thrm and see what they say.

I took out the coil, cleaned it, rescrewed it in and I noticed that the 2 juice intake holes are really large so I plugged one. No change :(…a miuthfull of juice regardless if I suck lightly or not.
Can you blow the juice out through the airflow holes like a regular tank? It sounds like it’s flooded
 

Sugar_and_Spice

ECF Guru
ECF Veteran
Verified Member
Sep 11, 2010
13,663
35,225
between here and there
Anyone have any suggestion about this problem with the Kanger? The thing is I really like its size and shape and hope this juice thing can be resolved. I can't believe a company as reputable as Kanger would release a device with this problem. I'll try to contact thrm and see what they say.

I took out the coil, cleaned it, rescrewed it in and I noticed that the 2 juice intake holes are really large so I plugged one. No change :(…a mouthfull of juice regardless if I suck lightly or not.
Take a q-tip and clean out the tip and gently push it down into the air chamber to remove the excess liquid. Use as many q-tips as needed. Hope this helps.
:)
 

Bea-FL

Vaping Master
ECF Veteran
Verified Member
Jul 7, 2016
3,094
62,467
Florida
Take a q-tip and clean out the tip and gently push it down into the air chamber to remove the excess liquid. Use as many q-tips as needed. Hope this helps.
Thought of it and did that too. No change.

Can you blow the juice out through the airflow holes like a regular tank? It sounds like it’s flooded
That's what I thought too because it gurgles when I vape just like once when I flooded another coil in another mod. I did blow in the airflow holes before I plugged one up. No change.

I'm thinking it's that the juice holes are way too large…3.5mm in diameter each. Even with one of them plugged the remaining hole is still too large IMO.

I emailed Kanger. We'll see what they say. Any other thoughts?
 

stols001

Moved On
ECF Veteran
May 30, 2017
29,338
108,119
No offense but I don't find KT to be particularly upstanding and awesome. I've owned a lot of KT early on and well, perhaps I am hard on gear but I find their stuff to be flimsy, hard to deal with and well, not that great and overpriced for what you get.

I know tons of folks love them and I am not trying to knock that in any way, but KT did not do much for me, although it was most of my EARLY gear. I'm just not all shocked and surprised is all I am saying.

Anna
 

Bea-FL

Vaping Master
ECF Veteran
Verified Member
Jul 7, 2016
3,094
62,467
Florida
Bea, what ohms and what wattage are you vaping? I am sure you told us that probably but my computer is moving too slow to look back pages.
the coils are NC 1.5 ohms, wattage is not adjustable. It is what it is. Does all this have anything to do with the coils being NiChrome? I mean I'm using the coil that came with the device so…

I'm wondering if the device is designed for high vg, high viscosity liquid and your mix may be a little thinner than that?
I use 50/50 VG/PG. Nowhere in any descriptions does it specify high viscosity juice.

https://www.vaporfi.com/kanger-togo-mini-vape-starter-kit.html
 

NolaMel

ECF Guru
ECF Veteran
Verified Member
Nov 17, 2012
12,815
80,994
New Orleans
the coils are NC 1.5 ohms, wattage is not adjustable. It is what it is. Does all this have anything to do with the coils being NiChrome? I mean I'm using the coil that came with the device so…

I use 50/50 VG/PG. Nowhere in any descriptions does it specify high viscosity juice.

Kanger TOGO Mini Vape Starter Kit
I looked at a review that said it shipped with a .5 coil as well. Did you try it and see if it’s weepy too? It takes the clocc coils, maybe the not nic salt one would have smaller juice holes??
 

DPLongo22

"Vert De Ferk"
ECF Veteran
Verified Member
Dec 17, 2011
32,966
182,746
Midworld
* * Cough * * . . . It looks like it just might be an 18650 Battery - Flat Top . . . ** Cough **

Just Sayin' . . . ;)


.

Showin' where MY mind travels, I was thinking, "Small can of mace?" :blush:

For the cowboys among us who don't have a holster and may be slipping into blingdom, here's an option -
il_340x270.1346047702_q1md.jpg

You stop that right NOW! o_O ;) :lol:


Stifle... :laugh:
 

rosesense

15years and counting
Supporting Member
ECF Veteran
Verified Member
Contest Winner!
  • Jan 1, 2010
    17,697
    52,266
    TN
    the coils are NC 1.5 ohms, wattage is not adjustable. It is what it is. Does all this have anything to do with the coils being NiChrome? I mean I'm using the coil that came with the device so…

    I use 50/50 VG/PG. Nowhere in any descriptions does it specify high viscosity juice.

    Kanger TOGO Mini Vape Starter Kit

    You probably saw the review on that site and how they addressed the issue, partially reprinted here. I can't think of anything else other than what NolaMel said about coils.

    ......"When I first filled the tanks to the fill line and tried to use them it was horrible: spitting, popping, gurgling.... Ugh. So I researched some other review sites and learned to fill it only about 3/4 of the way up to the fill line first of all; also it was suggested to let it sit upside down for a few minutes after filling (something about air pressure inside....?), and also to make sure I take off the drip tip and use a rolled up paper towel to remove any liquid that may have gotten down inside. NOW, once I do that at refill time it's a breeze and no more icky liquid popping into my mouth."
     

    440BB

    Vaping Master
    ECF Veteran
    Verified Member
    Apr 19, 2011
    9,227
    34,009
    The Motor City
    I read this in the reviews at myvaporstore.com -
    Only issue was the tube it came with the o rings were not placed right so every time I hit it I got a bunch of juice in my mouth, so I had to take it out and replace that stuff and once I did this thing shone like a star, definitely would recommend

    Maybe an exchange is in order.
     

    rosesense

    15years and counting
    Supporting Member
    ECF Veteran
    Verified Member
    Contest Winner!
  • Jan 1, 2010
    17,697
    52,266
    TN
    Unfortunately no change :mad:

    Bummer, I think I would be asking for a refund.

    Have you considered the original Pico? With a small tank like the Berserker mini, it fits in my hand and appears to be similar size as the Kanger one, per your pics. 13.00 at the site I linked earlier. Mine hasn't arrived yet, should be soon.
     

    Users who are viewing this thread