Tootle Puffers, Part Three! (The Sequel of the Redux)

[Semiretired]

That's the same as me. I can't handle airflow or warm so I will vape the same ways as I started. The tanks are the same only the mods have changed.

Yep, I have a few tanks - once I learned to stop breaking them (the top of the truck, refrigerator, etc. is not a place to set them) I settled in and bought quite a few of a couple of types that are all interchangeable and work fine for me.

While firmly in the same " camp " as Semi, can't quite say the same regarding my hardware. I started with fixed voltage egos and replaceable head CE types. Moved to VV pretty quickly, then into PT, Evod and T3S toppers. And so on.

Now, most everything is replaceable 18650 mods and kayfuns. LOTS of both, thanks to the FDA!!

Yep, I am pretty set and like David - I got no reason to change. I am not going back to cigs (never) and that is the mainstay in my life.

I did my latest upgrade with a few kayfuns lately myself.

 

[Semiretired]

Hi Semi. I'm Kat, and I'm a Tootle Puffer.

Hi Kat. As you can see by my Avatar I have been on ECF for awhile. And anyone that has been on ECF for awhile knows Kat.

I hide out mostly on the Porches, but do venture out periodically - I know many of the folks on this thread.

When the term Tootle Puffers first came out there were two versions of this thread Tootle and Tootie. I first saw the Tootie thread and being from a diverse background I determined I was not a "Tootie" so I never looked back...

Bunch of good folks in here - kind of like the porches...

 

[sorrynomore]

This Mornings vape...some 4mg Black Honey Pipe juice in my Kayfun lite.Using a freshly spun 28 gauge kanthal 1.7 ohm coil @8 watts on my newly won eVic Vtwo mini.

 

[TrollDragon]

Here is one I do not have but have considered it many times. Anyone have one?

$14.68 Phenomenon Lite Styled RTA Rebuildable Tank Atomizer - 4ml / 316 stainless steel + acrylic at FastTech - Worldwide Free Shipping

Something about the design of the deck I didn't like, but it might be a great MTL. I do like the cutouts on the AFC ring, it should be whistle free.

 

[corn flakes]

Hi Kat. As you can see by my Avatar I have been on ECF for awhile. And anyone that has been on ECF for awhile knows Kat.

I hide out mostly on the Porches, but do venture out periodically - I know many of the folks on this thread.

When the term Tootle Puffers first came out there were two versions of this thread Tootle and Tootie. I first saw the Tootie thread and being from a diverse background I determined I was not a "Tootie" so I never looked back...

Bunch of good folks in here - kind of like the porches...

I don't venture far from the tootle threads. Anything important will end up in the thread anyway. Once you find your setup and your comfort level you tend to stay where you are happy.

 

[juskiddin]

This Mornings vape...some 4mg Black Honey Pipe juice in my Kayfun lite.Using a freshly spun 28 gauge kanthal 1.7 ohm coil @8 watts on my newly won eVic Vtwo mini.

Let us know how you like the eVic mini. I'm curious (and looking )

 

[rhelton]

I thought they discontinued it a while back. I like the box (Pretty packaging is my downfall )

HA! Pretty box

Well one of my Hana purchases was decided over the cool carry case they come with now I just had to have one!

 

[rhelton]

LOL I fake it Just nod and smile.

Errrrrr lol

 

[rhelton]

This Mornings vape...some 4mg Black Honey Pipe juice in my Kayfun lite.Using a freshly spun 28 gauge kanthal 1.7 ohm coil @8 watts on my newly won eVic Vtwo mini.

Ohhh that sounds good with some coffee.

 

[Shawn Hoefer]

I'm all over the map. Everything from a 14500 Bagua with a Cyclone at 1.5 Ohms, and an iStick 20 with a Nautilus Mini using the VVTF V1 head at 1.6 Ohms and 12 watts to DNA200S and series boxes. One of my evening vapes is a Russian 91 built to 2 Ohms on a Vamo V2. Another is a 2 Ohm genny build on the Cool fire 1 (8.5 Watts)

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[Katdarling]

Mine (for this Sundy arvo) ...

pico 75W mod with NarDa dripper 1.25Ω @ 16W with Kahlua 12mg juice
eGrip II with modified RBA head, 1.5Ω @ 14W with Kahlua 12mg juice


I have big feet

TMI, Senore Aussie.

Hi Kat. As you can see by my Avatar I have been on ECF for awhile. And anyone that has been on ECF for awhile knows Kat.

I hide out mostly on the Porches, but do venture out periodically - I know many of the folks on this thread.

When the term Tootle Puffers first came out there were two versions of this thread Tootle and Tootie. I first saw the Tootie thread and being from a diverse background I determined I was not a "Tootie" so I never looked back...

Bunch of good folks in here - kind of like the porches...

Do you mean to tell me that all my attempts to remain a nearly invisible background extra, all my duplicity, guile, cunning, pretense, and craftiness ..... all have failed????

I've not hung on the Porch much at all, but I'm glad you ventured out and found us.

 

[Semiretired]

Do you mean to tell me that all my attempts to remain a nearly invisible background extra, all my duplicity, guile, cunning, pretense, and craftiness ..... all have failed????

Chuckle!!! Sincere Chuckle!!!

 

[sawlight]

I thought they discontinued it a while back. I like the box (Pretty packaging is my downfall )

I keep running across these things as if fate is telling me to buy one!

 

[Krisma]

Morning. I should get the Pangu this morning so I will do a bit of a critique this afternoon.

 

[ccwaters]

Here is one I do not have but have considered it many times. Anyone have one?

$14.68 Phenomenon Lite Styled RTA Rebuildable Tank Atomizer - 4ml / 316 stainless steel + acrylic at FastTech - Worldwide Free Shipping

It is alright, not a favorite, fit & finish is pretty nice. Up to 6x 1.8mm air flow holes in the base, but a bit foolish since the air under the coil chokes it down quite a bit. I opened up the air flow under the coil, ended up being much better, still restrict it down to a tight MTL, but now wide open I can do restricted lung (my preference).

Filling is a bit of a PITA, you'll need a syringe or one of those near zero flow needle tip bottles. You can bottom fill Taifun style, but have to be really careful or you'll end up with a mess. Deck is quite tiny, wicking can be a little tricky, need to get everything pretty much spot on or its going to flood/gurgle. not all drip tips fit in it, it is a bit on the small side for some.

Flavor is nice, overall performance is pretty decent, but because of annoying fill method I don't use it much. I've tried a few authentic parts on it, and everything has fit.

Once it is full, and wicked properly it really is a quite nice vape, however I have other tanks that perform at this level and are much more user friendly.

 

[gerrymi]

Hi Semi. I'm Kat, and I'm a Tootle Puffer.

Pop in coils, and watts in the range of men's sock size, me.

I'm a confirmed MTL Tootle Puffer (usually end up 10W-11W)...with NO interest in rebuilding...

But then I ran across this thread eGo ONE tank series – CLR coil and decided to try an "eGo ONE Mega V2 Tank" and a 5-pack of CLR Coils-1.0Ω.

The eGo ONE Mega V2 Tank is 4ml., has AFC (can dial down to a quite enjoyable MTL level) and, although it's Bottom-Fill, is pretty quick/easy to refill.

The CLR coils are manufactured to be rebuildable...(and come with a set of instructions in each 5-pack).

However, since they're about the same price ($9-$10 for a 5-pack) as other coils, I'm planning on using them just like my other blister pack coils.

(They have very good "flavor" and a somewhat "dense" vapor.)

But...I figure when I'm finished with a coil I'll just toss it into a baggie...

Then...depending on how bad this FDA Dooming stuff gets...I'll try replacing the wick.

(And, if things get really bad...I'll try replacing the coil itself...)

Joyetech eGo ONE Mega V2 Tank

Joyetech CLR Coils (5 pack)


..

 

[ccwaters]

In the spirit of thread title.

Stealth Tootle...

Boost Labs Izi Clone on an 18350 Colibri, 1.2 ohm 2.5mm 28g variable air flow from 1x .8mm to 4x 1.5mm, tight MTL,- tight DTL. Tiny chamber provides excellent flavor. PEEK, Ultem, and 316SS.

The chamber.

 

[Semiretired]

But...I figure when I'm finished with a coil I'll just toss it into a baggie...

Then...depending on how bad this FDA Dooming stuff gets...I'll try replacing the wick.

(And, if things get really bad...I'll try replacing the coil itself...)

I replace the wick now (usually once or twice) - while I have done a little bit of recoiling - I'm just saving them up for now and I will replace the coils when I have to...

Edit: I am going to find a young nephew with strong eyes to do it for me that is...

 

[Semiretired]

In the spirit of thread title.

Stealth Tootle...

Boost Labs Izi Clone on an 18350 Colibri, 1.2 ohm 2.5mm 28g variable air flow from 1x .8mm to 4x 1.5mm, tight MTL,- tight DTL. Tiny chamber provides excellent flavor. PEEK, Ultem, and 316SS.

Definitely covert...

 

[LJFinFLA]

I replace the wick now (usually once or twice) - while I have done a little bit of recoiling - I'm just saving them up for now and I will replace the coils when I have to...

Edit: I am going to find a young nephew with strong eyes to do it for me that is...

These work well too!

Magnifier Head Strap With Lights