My thoughts exactly!Looks komplex.
Tootle Puffers, Part Three! (The Sequel of the Redux)
- Thread starter Katdarling
- Start date
- th_trl_thread_readers 0
I tell people the same thing... I had no faith in it getting me to quit smoking... coming up on 4 years now. Congrats on the achievement!
I used the wrong link :-( try this one: $18.63 Free Shipping Authentic Rcomen Pico-s RTA Rebuildable Tank Atomizer (Pico-s, 316 SS + PEI, Yellow (kit)) at m.FastTech.comShawn, I'm looking at the FT pic..... how would one use a CLR in that?
In the first pic, there's a piece on the far left that looks like a drip tip without an o-ring, then a piece that looks like a thick washer. The drip tip looking piece replaces the top cap of the CLR coil. The base of the CLR coil screws into the washer bit that is screwed into the base. At the far right of the picture, there's a pin that drops back through the base and makes contact with the base of base of the coil...
Sent from my SAMSUNG-SM-N910A using Tapatalk
There's the Pico-S. According to discussions, it comes with the CLR adapter.
$18.63 Authentic Rcomen Pico-s RTA Rebuildable Tank Atomizer - 3ml / 316 stainles steel + PEI at FastTech - Worldwide Free Shipping
EDIT: I be too slow, yo.
Looks komplex.
Once configured for CLR coils, it's easy-peasy...
Sent from my SAMSUNG-SM-N910A using Tapatalk
I used the wrong link :-( try this one: $18.63 Free Shipping Authentic Rcomen Pico-s RTA Rebuildable Tank Atomizer (Pico-s, 316 SS + PEI, Yellow (kit)) at m.FastTech.com
In the first pic, there's a piece on the far left that looks like a drip tip without an o-ring, then a piece that looks like a thick washer. The drip tip looking piece replaces the top cap of the CLR coil. The base of the CLR coil screws into the washer bit that is screwed into the base. At the far right of the picture, there's a pin that drops back through the base and makes contact with the base of base of the coil...
Sent from my SAMSUNG-SM-N910A using Tapatalk
There is video in the discussion area at Fasttech. It really does look easy. Here's the vid. It compares the Pico to the Pico S (with CLR coil adapter). You can skip over about 12 minutes or so and see how to do it:
Thank you, ADore-able-One. Perhaps I'll give this a glance tamarraw. Got a hot "date" with the Irish One tonite for Cowboy Nite at our local Cheers. 
It's been fun here today, TPuffs! Thank you guys for the smiles, giggles, and massive amounts of sugar!
It's been fun here today, TPuffs! Thank you guys for the smiles, giggles, and massive amounts of sugar!
Thank you, ADore-able-One. Perhaps I'll give this a glance tamarraw. Got a hot "date" with the Irish One tonite for Cowboy Nite at our local Cheers.
It's been fun here today, TPuffs! Thank you guys for the smiles, giggles, and massive amounts of sugar!
Have fun, Kat. And thanks for being such a good sport about me throwing a great, big monkey wrench into your today - and thanks EVERYONE for playing along.
I promise (again) that it won't happen again.
Maybe.
Plastic chamber? Not sure about that.
It works well... especially with TC builds...
ETA: and it's completely a non-issue when using the CLR heads.
Sent from my SAMSUNG-SM-N910A using Tapatalk
Can you change out the assugly drip tip without issue?
The drip well for the drip tip IS kinda shallow, but it is 510...
Sent from my SAMSUNG-SM-N910A using Tapatalk
Huh... glass drip tips don't show up real well under those conditions, do they?The drip well for the drip tip IS kinda shallow, but it is 510...
Sent from my SAMSUNG-SM-N910A using Tapatalk
Sent from my SAMSUNG-SM-N910A using Tapatalk
Shawn, did you have any trouble with the o-ring that sits on top of the chimney, right under the drip tip? The guy in the video said it was a bit of a pain. He just dropped it down into the opening, made sure it was aligned right, then put the drop tip in to press it in place.Huh... glass drip tips don't show up real well under those conditions, do they?
Sent from my SAMSUNG-SM-N910A using Tapatalk
Set the o-ring on top of the chimney, with the chimney set too high on the coil base. When attaching the tank, friction will close the chimney down and seat the o-ring. No problems...
Sent from my SAMSUNG-SM-N910A using Tapatalk
Thanks. I said I wasn't going to order anything during the Fasttech sale, but I'm mighty tempted by a different type of tank that uses the CLR coil.
All this chit chat about it forced - forced, i tell ya - me to pull mine out and build it. I've got the original clone he was referring to in the video, so the air's a bit more restrictive, but it's a durn fine tootler! I dropped a .98 SS316L build into a CLR head, converted the deck over, wicked, juiced, and filled it in under 10 minutes. I coulda done it faster, but it took 5 minutes to find the adapter
Sent from my SAMSUNG-SM-N910A using Tapatalk
You're making it hard on me. I'll probably get one since I obviously need it desperately. Only have nine tanks that use the CLR coil.All this chit chat about it forced - forced, i tell ya - me to pull mine out and build it. I've got the original clone he was referring to in the video, so the air's a bit more restrictive, but it's a durn fine tootler! I dropped a .98 SS316L build into a CLR head, converted the deck over, wicked, juiced, and filled it in under 10 minutes. I coulda done it faster, but it took 5 minutes to find the adapter
Sent from my SAMSUNG-SM-N910A using Tapatalk
Lol... I have an eGo ONE Mega and an eGo ONE Mini, and the Pico. The Lazy atty is intriguing, though... I would like an eGo ONE V2, but really don't see the need... Think of it as a top fill eGo ONE tank.
Sent from my SAMSUNG-SM-N910A using Tapatalk
Similar threads
- Locked
