Tootle Puffers, Part Three! (The Sequel of the Redux)

Katdarling

I'm still here on ECF... sort of. ;)
Supporting Member
ECF Veteran
Verified Member
Jan 25, 2011
32,582
167,751
Utopia
I may now attempt the longest multi quote in Katistory...

(damm you mucho post, kiddies!)


Can't like that post, sorry for your pain. I have some friends across the pond (GB) that said putting Clove Oil on the tooth (not the gum) would numb the nerve, I haven't tried it, but bought some clove oil for when I get a toothache I can try it. Toothache is the worse, hope you get it taken care of soon.

Benzocaine vs. Clove oil – On two approaches to tooth pain –

Mikey, tooth update? How ya doin'? A couple of other great oils are Tea tree and oil of Oregano. Taste? DISGUSTING. Effective? Somewhat, yes, particularly the Tea tree. (apply with a Q-tip...... no more than a dab'll doo ya!)



Yeah, I once told him in the locker room he should diet and he looked down and said "Why? What color is it now?"

I call it furniture disease.
It's when your chest falls into your drawers!


You know why Adele crossed road?

She wanted to say " hellllooooo from the other side".


:facepalm:
:facepalm:
:facepalm:
:facepalm:
:facepalm:
:facepalm:





Well trying to come up with something to get for my birthday (tomorrow 24th, a young 57), but I have everything I want or need, really sucks. Seen the Blem P things, just not my style, don't like large tube mods, or box mods at all (but I do have several, defender, reo, etc.). To not have a want or need, am I that set in life? I have a loving wife, a good job (I own my own pest control company), tons of vape gear (lots never used still in the box) and many liters of juice (also over a liter of 100mg/ml nic in the freezer). I am just So happy with what I have I don't need anything else. Am I Strange? Most Likely :) Going to MoM's tomorrow, she likes my birthday better than me because I am "Her Baby". I don't post a lot, but have been around a while lurking reading everyone elses posts, just thought I would come out of the woodwork for today. :thumbs:


:bday: BurnMeister!!! May your year be bright and cheery and may all your Wednesdays include a hump. :confused:



Hey Burnie, the Provari mini is actually quite small and makes a great stealth vape, or you can add the extensions. The mini w/ a 18490 extension is actually shorter than the full size w/ no extension (18490 mode).

Hahahahahahahah! By like ONE millimeter!!!!!!! :lol:



I figured the smaller chamber would increase flavor. Kinda like the old Igo-W 19mm RDA.

Kinda sorta like-a Kabuki? Huh huh huh?



Here they come.
Sorry I was bored sitting in the corner and whittled them down a bit! :rolleyes:

carvedcrayons_06-carvedc-16.jpg

Ok, that's just falippin' AB-FAB!!! Why are you so cornered today, FLA? ;)




Look on bottom of seat. Been drawing a map, and there's a spoon and partial tunnel behind the poster of the solid silver Caravela mod.
But be careful! If Kat catches us, she'll "lock us in the dungeon, and make us eat wheat bread!" :lol:


I shall. But we're all out of wheat bread. Crayons ok?




Well, now that you mention getting back on topic..................
I've decided to see what the big deal about cloud chasing is.
Anyone know where I can get a REALLY big top cap and drip tip?


Ok, NOW I'm interested in building! At last. The geriatric coil!!!!


Same reason I don't go out on New Year's Eve. That's when the amateur drunks come out!


AHEM!!!!!! I believe you mean St. Patricia's Day, dahlink.



Those are cute, but I want TC and to be able to use 18650s.

BB4 BB4 BB4........


Hmmmmmmm..... I'm seeing a B Box4 in my mind right now......



I'm not looking to get one just yet.
I like it but my concern is with the coils getting stuck in the bottom and the way it needs to be drained. I like the fact that it's a glass tank and the form factor.


PreZactly my take on the lil cutie pie!! At first, I was like, oh yeah, bring it on!! Then I was like, no whey dude!


(occasional lapses into Valley Girl often overtake me. my apologies)



I really like the new Rat Black DNA40! For some reason when I saw the price the other day, it was a lot higher, must have been a glitch. Love the design of it, uses BVC coils, 18650's and from what I read, you just slide the glass down to refill? :w00t:

Really is an All-In-One Tootle setup!! :D

Yes, and YES! And THESE paws cannot wait to snuggle one!!!!!!!!!


BB4.jpg





Neither can I. I try, but it flies so quickly. And I can't read that fast.

That's a beautimus avatar!

OMG. Ha! :pervy:

Well my dear, you are the darling and we "love" the darling. :wub::wub:

THAT feeling is incredibly mutual, my dear one. :toast:




Speaking of new avatar's, you changed your's again. Everybody keeps changing and changing and changing. I can't tell who's who anymore!:D


Hi. I'm Betty. ;)



Just gonna get a blankie and pillow and set up camp in the corner,..........

984155395ba4430af17dad20c3376b0d.jpg





Says it all! :confused:

main-qimg-425013fcc389a46551da24dc32efde98


I am komplete. Yep, I've got everything.


Ok, have fun, my little TPuffs! See you when I see you!


Hugs all around~
 

Sir Kadly

Tootle Wompin' Squonkaholic
ECF Veteran
Verified Member
  • Sep 18, 2015
    4,361
    50,684
    Michiana

    darkangel07760

    Super Member
    ECF Veteran
    Verified Member
    Oct 29, 2015
    435
    1,393
    50
    I have noticed that regardless of how I try to keep my Nautilus tanks clean, I find them terribly difficult to twist off whenever i need to change the coil or add juice. Also thanks to working at Starbucks for a quite a long time, my grip isn't what it used to be... What MTL tanks out there are easier to remove the top or bottom? Any help would be greatly appreciated.

    sent from my Galaxy Note 5
     

    LJFinFLA

    Vaping Master
    ECF Veteran
    Jul 9, 2014
    3,667
    25,604
    SW Florida
    I have noticed that regardless of how I try to keep my Nautilus tanks clean, I find them terribly difficult to twist off whenever i need to change the coil or add juice. Also thanks to working at Starbucks for a quite a long time, my grip isn't what it used to be... What MTL tanks out there are easier to remove the top or bottom? Any help would be greatly appreciated.

    sent from my Galaxy Note 5

    I have noticed that as well with mine and what I did was to not crank down so much when screwing the tank back on. It does not need to be screwed all the way down. Just snug enough that the glass and o-ring connect. If that doesn't work you could use a tool like this one. It is out of stock here but they have them around.

    Coil Master Vape Tweezers | Accessories | VaporBeast
     

    pufZeppelin

    Vaping Master
    ECF Veteran
    Jul 6, 2013
    7,610
    24,603
    Florida, SW
    I have noticed that as well with mine and what I did was to not crank down so much when screwing the tank back on. It does not need to be screwed all the way down. Just snug enough that the glass and o-ring connect. If that doesn't work you could use a tool like this one. It is out of stock here but they have them around.

    upload_2016-3-25_14-1-19.png
    great advice

    I have noticed that regardless of how I try to keep my Nautilus tanks clean, I find them terribly difficult to twist off whenever i need to change the coil or add juice. Also thanks to working at Starbucks for a quite a long time, my grip isn't what it used to be...
    What MTL tanks out there are easier to remove the top or bottom? Any help would be greatly appreciated.


    you say CLEAN, do you also mean DRY ? you need to lubricate ALL surfaces with eJuice
    it reduces friction and helps seals to seal
    this is how/what I do
    upload_2016-3-25_14-5-54.png

    just have it on my vape-desk and use it on everything

    - - -

    the kanger subtank series has done me good; a VERY nice kit in a box
    stNano - stMini - stPlus
    18mm-22mm-25mm diameters

    upload_2016-3-25_14-21-41.png


    :evil:
     

    MikeyConti

    VapeBro
    ECF Veteran
    Verified Member
    Jul 22, 2014
    3,885
    17,524
    35
    South Carolina
    I have noticed that as well with mine and what I did was to not crank down so much when screwing the tank back on. It does not need to be screwed all the way down. Just snug enough that the glass and o-ring connect. If that doesn't work you could use a tool like this one. It is out of stock here but they have them around.

    Coil Master Vape Tweezers | Accessories | VaporBeast
    Dang, I need to find some of those... :thumb:
     

    Burnie

    The Bug Man
    ECF Veteran
    Verified Member
    Jul 1, 2009
    5,564
    18,197
    Sunny Florida
    Provape have released another stack of blemished provari s :p
    Sigh :( I just HAD to go look, they had the BLEM ProVari 2.5 Mini - Lagoon Blue in stock again, Sigh :(

    My first (and only) Porvari is ordered. :rolleyes:

    Dang you @Krisma you enabeler :grr: Quit making me spend money :lol:
     

    pufZeppelin

    Vaping Master
    ECF Veteran
    Jul 6, 2013
    7,610
    24,603
    Florida, SW
    Sigh :( I just HAD to go look, they had the BLEM ProVari 2.5 Mini - Lagoon Blue in stock again, Sigh :(

    My first (and only) Porvari is ordered. :rolleyes:

    Dang you @Krisma you enabeler :grr: Quit making me spend money :lol:

    did you just leave it "as is"
    or did you gussy it all up with a flat top ring, or P3 top, or battery ext tube cap... ?

    :)
     

    Krisma

    Vaping Master
    ECF Veteran
    Verified Member
    Jul 4, 2014
    8,800
    46,582
    Australia
    Sigh :( I just HAD to go look, they had the BLEM ProVari 2.5 Mini - Lagoon Blue in stock again, Sigh :(

    My first (and only) Porvari is ordered. :rolleyes:

    Dang you @Krisma you enabeler :grr: Quit making me spend money :lol:

    :banana::banana::banana:

    I can dance on your behalf. :p :bday:

    I have been waiting for that blue.....it's my favourite :wub:and I am hoping the Aussies can do a little group buy so I can get it as well.
     

    darkangel07760

    Super Member
    ECF Veteran
    Verified Member
    Oct 29, 2015
    435
    1,393
    50
    View attachment 542173great advice




    you say CLEAN, do you also mean DRY ? you need to lubricate ALL surfaces with eJuice
    it reduces friction and helps seals to seal
    this is how/what I do
    View attachment 542174
    just have it on my vape-desk and use it on everything

    - - -

    the kanger subtank series has done me good; a VERY nice kit in a box
    stNano - stMini - stPlus
    18mm-22mm-25mm diameters

    View attachment 542178

    :evil:
    I clean off the majority of the juice, so as to avoid buildup. But i did read somewhere that there has to be some on there so that it doesn't get stuck. I think i over tighten it!

    sent from my Galaxy Note 5
     

    darkangel07760

    Super Member
    ECF Veteran
    Verified Member
    Oct 29, 2015
    435
    1,393
    50
    I have noticed that as well with mine and what I did was to not crank down so much when screwing the tank back on. It does not need to be screwed all the way down. Just snug enough that the glass and o-ring connect. If that doesn't work you could use a tool like this one. It is out of stock here but they have them around.

    Coil Master Vape Tweezers | Accessories | VaporBeast
    Dang it is out of stock! But i will keep checking back.

    sent from my Galaxy Note 5
     

    Belhade

    Ultra Member
    ECF Veteran
    Verified Member
    Jan 15, 2010
    1,585
    5,062
    New York (no, not the city)
    Provape have released another stack of blemished provari s :p
    YES!! They have the metallic emerald green 2.5 again! I waited too long and it went away, almost resigned myself to the metallic ruby red. Though, now I have red EVOD and Buddha minis...
     

    juskiddin

    Ultra Member
    ECF Veteran
    Jul 29, 2015
    1,295
    10,129
    Canada
    Just going to have to give up on tootle puffing I guess. A week ago I won a Movkin 150 watt Disguiser mod now I just won a 50W bluetooth mod, TFV4 Mini, 2 batteries and charger.
    Doesn't take much for you to dip your toe into the dark side ;)
     

    Robert Cromwell

    Moved On
    ECF Veteran
    Feb 16, 2015
    14,009
    65,472
    elsewhere
    Doesn't take much for you to dip your toe into the dark side ;)
    Free stuff!
    20 watts is my upper limit so far.
    And I do that on an Istick Basic with a 14 mm GS Air2 tank. Great little pocket rig and they have .75, 1.2 and 1.5 coils that seem to last half of forever.
     

    Users who are viewing this thread