Tootle Puffers, Part Three! (The Sequel of the Redux)

[Two_Bears]

I bought all kinda of kayfun stuffs from fasttech for my kayfuns. The things I bought worked just fine, the bellcaps were well spent money, used them more than the stock tank. I also bought a few of the quartz tanks and hmmm.....your putting a lot of faith in 2 thin orings holding the kayfun together and the tank partially blocked the fill port so it made refilling a nightmare. Too bad all my kayfuns seeped a bit from the fill port except my original Russian. Drilled the airflow bigger in a couple that improved them a bit, vaped my first .8 subohm build in a kayfun and again like my first cotton build in my protank, eyes rolled back and a sense of wow I can get use to this.... The kayfun filling became a hassle so I went looking for another tank and now its subtank mini's using the rba, they have performed amazing for us and not needing to upgrade in any way none too soon.

I agree with you about the stupid O Rings holding the Quartz tank together. Mine came apart snd dumped a Tank of Juice in my pocket.

 

[ToolmanTexas]

Is it a tank, a carto, or a large suppository? [emoji3]


Sent from Uranus using Tapatalk

I suppose it could service all 3

 

[Eskie]

+100 on this! Me too!
@Eskie Are you feeling better?

Hey, Lynn. Sorta better. Hate when these colds linger, but it's 60 degres out by me so that makes up for many sniffles.

 

[Sir Kadly]

Tootle Puffers, Part Three! (The Sequel of the Redux)

No one knows what I need to do to the Wanko to make it work? Who da thunk it with all the experts here.

Which coil did you use in it?

 

[ChelsB]

Hi all, I try to stay away from asking too many basic (stupid) questions but I need to know this: can you use TC coils in regular mode? I know it doesn't work vice versa. Thanks guys for humoring me[emoji4]

 

[brewbear]

Tootle Puffers, Part Three! (The Sequel of the Redux)

No one knows what I need to do to the Wanko to make it work? Who da thunk it with all the experts here.

Sorry, as always ,late to the party. I seem to remember reading about a similar problem elsewhere. The blade from the 510 to the switch is touching the side. I'll go looking and be back!

 

[DPLongo22]

My favorite! I'm down to two now...gave away 2 and lost a screw to one. Emailed Chels to ask for sizes, see if he responds.

I just put my name down for one

Me too!

Chels, meet Chels.

It was inevitable, no?

 

[ChelsB]

Chels, meet Chels.

It was inevitable, no?

That's why I want one! Silly reason, I know. But I want one nonetheless[emoji4]

 

[DavidOck]

Hi all, I try to stay away from asking too many basic (stupid) questions but I need to know this: can you use TC coils in regular mode? I know it doesn't work vice versa. Thanks guys for humoring me[emoji4]

No. (Other than SS, if wound to an acceptable resistance.)

 

[Two_Bears]

Hi all, I try to stay away from asking too many basic (stupid) questions but I need to know this: can you use TC coils in regular mode? I know it doesn't work vice versa. Thanks guys for humoring me[emoji4]

Answer is yes and no (literally)

Yes to Stainless Steel for both modes
Never to Titanium or Nickel. In power mode

 

[DPLongo22]

That's why I want one! Silly reason, I know. But I want one nonetheless[emoji4]

Working with his team-of-wunderkind can be a, um, "fun and exhilarating" ride.

MARVELOUS stuff, for sure. Extraordinary, in fact.

 

[corn flakes]

Hi all, I try to stay away from asking too many basic (stupid) questions but I need to know this: can you use TC coils in regular mode? I know it doesn't work vice versa. Thanks guys for humoring me[emoji4]

There are no stupid questions.

 

[ChelsB]

There are no stupid questions.

Thanks, I appreciate that! [emoji4]

 

[ChelsB]

Wondering why when the other day a tank wasn't working on my pico, it started working in bypass mode?
And is it more "risky" using bypass mode?

 

[Bea-FL]

Wondering why when the other day a tank wasn't working on my pico, it started working in bypass mode?
And is it more "risky" using bypass mode?

See, this is why I'm glad you keep asking questions. Because, often you ask about things I havent thought to ask about and then when you get an answer I learn something new too.

So no more apologizing for asking questions.

 

[ChelsB]

See, this is why I'm glad you keep asking questions. Because, often you ask about things I havent thought to ask about and then when you get an answer I learn something new too.

So no more apologizing for asking questions.

Thanks Bea! [emoji4] much appreciated! Glad I inadvertently help others since I take so much help!

 

[ChelsB]

Just spilled 60 ml of my favorite vanilla cotton candy. I wish I could cuss right now!

 

[Plettschner]

Wondering why when the other day a tank wasn't working on my pico, it started working in bypass mode?
And is it more "risky" using bypass mode?

Bypass mode is straight battery power to coil... no power or temp control. Like an unregulated mod.


Sent from Uranus using Tapatalk

 

[motordude]

See, this is why I'm glad you keep asking questions. Because, often you ask about things I havent thought to ask about and then when you get an answer I learn something new too.

So no more apologizing for asking questions.

Exactly!!!
I have learned a lot from her posts!
I have an excuse though, I am a man. We don't ask.

 

[Shawn Hoefer]

Hi all, I try to stay away from asking too many basic (stupid) questions but I need to know this: can you use TC coils in regular mode? I know it doesn't work vice versa. Thanks guys for humoring me[emoji4]

SS coils will work in SS TC, and power (wattage/voltage) modes. Ni200 and Ti#1 should ONLY be used in their respective TC modes.

Sent from my SAMSUNG-SM-N910A using Tapatalk