Tootle Puffers, Part Three! (The Sequel of the Redux)

[sorrynomore]

@Bea-FL ...I'm Hoping you get better quickly and that your back here real soon !!!

 

[Skold]

I've noticed through the past year of being on this site the people of ecf are so supportive it's wonderful to see.

 

[lil_buddy]

Finally trying out the bell cap. I am done with the toptank and top fill tanks; I am sick of the flooding/leaking after filling.

I plugged up 3 of the holes in the bottom-most piece of the rba with little silicone beads. Putting the little insulator tube into the RBA did not constrict airflow in any way that I was able to detect.

No burning plastic taste yet.

 

[oplholik]

Pretty slick buddy. I won't buy anything top fill anymore, we just don't get along.

 

[Katdarling]

chirp?

 

[petrotech]

I need a new toy....figured I'd ask you puffer toots first. I'll probably post in the mech section later. maybe @Shawn Hoefer could chime in, he has a few mods. @ToolmanTexas is good at getting me to buy stuff i don't need also. ​

-22 mm mech mod (or smaller, I know a couple companies made some 20mm 18xxx)
-copper
-recessed switch, no locking ring (not a deal breaker)
-510 connection with center pin (not a "hybrid")
-single tube for 18650 batteries.

I love my Super T Workhorse, but I only have the copper tube and stainless 510. it bugs me, even though it performs fine.

anyone got some suggestions?

 

[Shawn Hoefer]

I need a new toy....figured I'd ask you puffer toots first. I'll probably post in the mech section later. maybe @Shawn Hoefer could chime in, he has a few mods. @ToolmanTexas is good at getting me to buy stuff i don't need also. ​

-22 mm mech mod (or smaller, I know a couple companies made some 20mm 18xxx)
-copper
-recessed switch, no locking ring (not a deal breaker)
-510 connection with center pin (not a "hybrid")
-single tube for 18650 batteries.

I love my Super T Workhorse, but I only have the copper tube and stainless 510. it bugs me, even though it performs fine.

anyone got some suggestions?

The smallest diameter 18650 tube I know of is the Origin which comes in at 21 mm. I know of no tubes using 18650 smaller than that.

I've mentioned the King V2 quite a few times over the past week. It's my favorite 22 mm mech. The Phantom would also meet your criteria, and is quite sleek.

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[ChelsB]

I'm so sorry to read about @Bea-FL! I haven't been on the site much the past 2 days and am just seeing this. My best wishes for a speedy recovery!


Sent from my iPhone using Tapatalk

 

[lil_buddy]

True or false:

Joyetech ego AIO's use evil cubis coils.
Joyetech ego AIO cannot accommodate the lauded CLR coils

 

[petrotech]

The smallest diameter 18650 tube I know of is the Origin which comes in at 21 mm. I know of no tubes using 18650 smaller than that.

I've mentioned the King V2 quite a few times over the past week. It's my favorite 22 mm mech. The Phantom would also meet your criteria, and is quite sleek.

Sent from my SAMSUNG-SM-N910A using Tapatalk

forgot about the phantom! thanks.

I think MCR made some 20 mm awhile ago....i remember someone posting pictures a little bit ago...i just forget who and where! lol

 

[ChelsB]

Do you all remove the screws before cleaning your rebuildable tanks? I soaked one of mine in hot water last night and the screws already have rust on them!


Sent from my iPhone using Tapatalk

 

[petrotech]

Do you all remove the screws before cleaning your rebuildable tanks? I soaked one of mine in hot water last night and the screws already have rust on them!


Sent from my iPhone using Tapatalk

I normally don't. I also dry them after I wash them. what kind of screw?

 

[ChelsB]

I normally don't. I also dry them after I wash them. what kind of screw?

The screw in the posts that holds the wire. I only soaked it for a few minutes and then let it air dry. I guess the screws aren't stainless steel!


Sent from my iPhone using Tapatalk

 

[Zen Knitter]

Do you all remove the screws before cleaning your rebuildable tanks? I soaked one of mine in hot water last night and the screws already have rust on them!


Sent from my iPhone using Tapatalk

@VapeLuvr are they Chinese stainless steel? Stainless doesn't rust. Oops! Too late.

 

[Shawn Hoefer]

forgot about the phantom! thanks.

I think MCR made some 20 mm awhile ago....i remember someone posting pictures a little bit ago...i just forget who and where! lol

Consider that if you find a 20 mm tube mod, the tube is going to be VERY thin. The cell is 18 mm WITH wrapper, and you'll want some okay... the walls of a 20 mm tube would have to be around .5 mm or less.

Having said that, I've got some tinfoil...

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[Shawn Hoefer]

I normally don't. I also dry them after I wash them. what kind of screw?

Must read thread. Must not respond. Must read thread. Must not respond. Must...

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[petrotech]

The screw in the posts that holds the wire. I only soaked it for a few minutes and then let it air dry. I guess the screws aren't stainless steel!


Sent from my iPhone using Tapatalk

@VapeLuvr are they Chinese stainless steel? Stainless doesn't rust. Oops! Too late.

now you guys got me going down a rabbit trail learning about how and why metals rust.

Why Does Stainless Steel Rust? |

6 hours from now I'll be reading about aliens and how their supieror metallurgy allows then to travel space and time

 

[Katdarling]

6 hours from now I'll be reading about aliens and how their supieror metallurgy allows then to travel space and time

And really.... ya never hear about a rusty alien, do ya.

 

[pokemom]

True or false:

Joyetech ego AIO's use evil cubis coils.
Joyetech ego AIO cannot accommodate the lauded CLR coils

False sort of. Joytech ego one v1 or v2 take clr coils. Joytech ego AIO takes AIO coils but can also take cubis coils. The AIOs (ego or otherwise) do not take clr coils.


Sent from my iPhone using Tapatalk

 

[pokemom]

Finally built the stubby KF w/bell cap. Will report soon.


Sent from my iPhone using Tapatalk