Tootle Puffers, Part Three! (The Sequel of the Redux)

[RainSong]

You are a wondrful person to give this cutie a home.


All I can say is I have 3 strickly indoor cats and I vape 50/50 juice indoors. Have been almost 3 years. My cats get annual complete blood workups and nothing had been amiss on anyone's bloodwork.

That makes me feel better. I wasn't really worried but always best to know potential dangers.

 

[DingerCPA]

@Shawn Hoefer..... Dogs, you say?????

This was what I found on Sunday after being out for about 90 minutes when a thunderstorm blew through....

 

[DPLongo22]

OMG, Dinger!!!!

Ain't been heayuh much, and some of y'all know how I feel about reading backwards, but I DID want to stop by just to say...



Hope all are well!

 

[oplholik]

@Shawn Hoefer..... Dogs, you say?????

This was what I found on Sunday after being out for about 90 minutes when a thunderstorm blew through....

Oh my! Did the thunder scare the dog?

 

[DPLongo22]

Oh my! Did the thunder scare the dog?

That's what I was thinking too. Jeez....

 

[Zen Knitter]

@Shawn Hoefer..... Dogs, you say?????

This was what I found on Sunday after being out for about 90 minutes when a thunderstorm blew through....

Oh that/those pooches would be on my ....e list for quite some time.

 

[DingerCPA]

Oh my! Did the thunder scare the dog?

That's what I was thinking too. Jeez....

Yup. She's scared of thunder, fireworks, gunshots, lawn mowers, the UPS guy, squirrel farts,....

This is why she's called Big Dumb Dog

Couldn't really get mad at her. Didn't catch her in the act.

 

[DPLongo22]

Yup. She's scared of thunder, fireworks, gunshots, lawn mowers, the UPS guy, squirrel farts,....

This is why she's called Big Dumb Dog

Couldn't really get mad at her. Didn't catch her in the act.

Poor girl (I get it). Heck - would you have gotten mad even if you DID catch her in the act?

They SO own us.

 

[oplholik]

Our little dog just sits and shivers, and shakes. I dread 4th of July coming up, going to have to get something from the vet to help keep her calm.

 

[englishmick]

i also have a kayfil tool(non authentic)and it doesn't go all the way through(i think it can't with the kfl+V2 because it has a different top cap than the v1)or it'll push the o-ring or damage it.
i just put the kayfun(without the DT) on it until it stops, unscrew the base from the tank and gently balance the tank on the kayfill so the juice doesn't spill(and some times it does a bit).
and when done, i just put the base back so the upper chimney part goes through the kayfill and gently screw it back to the tank.

 

[lil_buddy]

Our little dog just sits and shivers, and shakes. I dread 4th of July coming up, going to have to get something from the vet to help keep her calm.

Worth a try?
Dog Anxiety Vest | Shop Dog Anxiety Treatments | ThunderShirt

 

[DPLongo22]

Worth a try?
Dog Anxiety Vest | Shop Dog Anxiety Treatments | ThunderShirt

Rubbing dryer sheets over them does the same thing (basically). And our dog LOVES that (she HATED the ThunderShirt).

 

[englishmick]

i also have a kayfil tool(non authentic)and it doesn't go all the way through(i think it can't with the kfl+V2 because it has a different top cap than the v1)or it'll push the o-ring or damage it.
i just put the kayfun(without the DT) on it until it stops, unscrew the base from the tank and gently balance the tank on the kayfill so the juice doesn't spill(and some times it does a bit).
and when done, i just put the base back so the upper chimney part goes through the kayfill and gently screw it back to the tank.

Kayfil frustration here. I tried the method you suggested and it still won't work for me, but I think I might have figured out what my problem is.

I got a couple of kayfil type tools from FT.

Noticed today that the main part of the tool stem is clearly wider than the top part of the KFL chimney, which I guess explains why it chews up the ring.

Also, it looks like the tool would have to work by the thinner end part of the tool fitting inside the top end of the chimney, which I think is what you were saying in the last part of your post. Is that the case? On mine the end part of the tool is way too thick to fit inside the chimney.

The tool I got was titled refill tool for 5 Pawns KFL, the word Kayfil doesn't appear. Anyone know if the chimney on the 5 Pawns version is larger than regular KFL chimneys?

The regular Kayfil has been out of stock on FT since I started looking. Can't find it anywhere else.

 

[Shawn Hoefer]

@Shawn Hoefer..... Dogs, you say?????

This was what I found on Sunday after being out for about 90 minutes when a thunderstorm blew through....

We had - HAD - a Great Pyrenese puppy. Like to drink out of the toilet, but when he went into the bathroom, he'd close the door with his tail. We rehomed him after he'd eaten through TWO bathroom doors in a week... For some reason, the womenfolk wanted a door on the bathroom more than they wanted the dog.

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[RainSong]

Doggy style people, what's the best approach to wicking this thing. Those juice inlets look gigantic. I won't be building it until after work so throwing it out there now ahead of time.

 

[RainSong]

We had - HAD - a Great Pyrenese puppy. Like to drink out of the toilet, but when he went into the bathroom, he'd close the door with his tail. We rehomed him after he'd eaten through TWO bathroom doors in a week... For some reason, the womenfolk wanted a door on the bathroom more than they wanted the dog.

Sent from my SAMSUNG-SM-N910A using Tapatalk

Oh come on, they couldn't survive with just a curtain?

 

[Shawn Hoefer]

Doggy style people, what's the best approach to wicking this thing. Those juice inlets look gigantic. I won't be building it until after work so throwing it out there now ahead of time.

Must not make jokes. Must not make jokes. Must not make jokes...

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[Dubminer]

Doggy style people, what's the best approach to wicking this thing. Those juice inlets look gigantic. I won't be building it until after work so throwing it out there now ahead of time.

Dead easy to wick,just cut to the width of deck then stuff in the channels. check this video starting around 7.30.

 

[RainSong]

Dead easy to wick,just cut to the width of deck then stuff in the channels. check this video starting around 7.30.

Perfect. Looks easy peasy.

 

[JustWondering1]

I've got a couple of isticks coming to the end of their lives and am seriously tempted to replace them with one of these - do I go for it .......... ???

I'm getting some more iSticks as soon as I can. They're so good and reliable. Most of my mods have replaceable batteries, but, every now and then, an iStick is just what I need. They're perfect for giving to new vapers who might be overwhelmed with vaping, and who need very simple equipment. I'm helping my FIL transition to vaping and he is hugely overwhelmed with it. If I sent him something with TC and he accidentally put it in TC mode, he'd freak out big time!