Tootle Puffers, Part Three! (The Sequel of the Redux)

Trigster

Super Member
Aug 2, 2017
820
4,695
SF Bay Area
I shop at fasttech a bunch but I'm a little nervous to give my number to my freedom smokes after reports of problems with security. Maybe purchase a prepaid card if you order from them?
I vaped for nearly my first 1.5 years of vaping, and still do sometimes, using the Ego-T 1,100mAh batteries, with 1.5 and 1.8 coils in my Innokin 16D clearos. No problem! Wasn't doing any cloud-blowing or anything, but never wanted to either. :)

I even set my Coolfire IV at 3.4-3.5v using my KFL+ V2 shorty with 1.2, 1.5, and 1.8 ohm coils in it. Still no problem.
Thank You...I guess I'd like the glass tank and the bigger volume...And Cloud-Blowing isn't for me...Just something simple that resembles the feel of smoking...

Fast Tech has that starter kit for $26 and the coils are $1.50...I'm not a total Cheap Skate but that seems pretty reasonable to me...So maybe I'll just go and up-grade my Tootle Puffing Gear...Trig :D
 

JCinFLA

Vaping Master
ECF Veteran
Verified Member
Oct 21, 2015
9,397
44,582
Thank You...I guess I'd like the glass tank and the bigger volume...And Cloud-Blowing isn't for me...Just something simple that resembles the feel of smoking...

OH, wasn't poo-pooing the T18 at all! I just posted what I used early on, and at what v I set my CF IV with 1.2-1.8 coils...to let you know I've personally had no problems using 1.5ohm coils at lower volts, like the T18 has. :thumbs:
 

AnthonyB

Ultra Member
Supporting Member
ECF Veteran
Verified Member
Jul 5, 2010
2,823
7,779
Sydney Australia
I have a Rocket V2. My first dedicated RTA. It's still somewhere in my pile o' stuff. Much of the Rocket was chromed brass, and therefore not as durable as ss.

Sent from my SAMSUNG-SM-N910A using Tapatalk

Mine leaked like a sieve lol

It was very dirty but the ultrasonic cleaner has mostly removed the brown encrusts . I think it rusted a bit ? Can chrome even rust? Lol


Sent from my iPhone using Tapatalk
 

AnthonyB

Ultra Member
Supporting Member
ECF Veteran
Verified Member
Jul 5, 2010
2,823
7,779
Sydney Australia
Yo' Tootle Puffers...I'm thinking about an Innokin T18 Starter Kit...They seem simple enough even for me...

1. Will I be able to use that Tank on one of my 3.8v Batteries if I need to ?
2. Will a Spinner II vv battery up to 4.8v be useable ?
3. Will I get about the same life out of the Coil as I do with my i16 Clearomizers ?

Any opinion in general most welcome...And I am going to stay with a "Stick Type" Set-up...
I am pretty much of a light weight...Never hot box the Clearomizers...I get over 2 weeks...

Thanks...Trig :D

Have you considered the T20? I have both the 18 and 20 and like the 20 better.

I've used both on spinners and they work just fine. Actually I sometimes prefer them on spinners and ego batteries just because it lowers the wattage a bit. I find they run a bit hot for my liking on the battery that comes with them and 12mg juice will get me pretty nicced up on it.


Sent from my iPhone using Tapatalk
 

Trigster

Super Member
Aug 2, 2017
820
4,695
SF Bay Area
Have you considered the T20? I have both the 18 and 20 and like the 20 better.

I've used both on spinners and they work just fine. Actually I sometimes prefer them on spinners and ego batteries just because it lowers the wattage a bit. I find they run a bit hot for my liking on the battery that comes with them and 12mg juice will get me pretty nicced up on it.


Sent from my iPhone using Tapatalk
Thanks Much...I appreciate the info. !!!...Trig :D
 

Two_Bears

Vaping Master
ECF Veteran
Verified Member
Jul 4, 2015
7,045
16,673
Northern Arizona
LOVE FT!

Thanks...I'm still lurking but they're so cheap now I just might get 2...And at about $1.50 each for the coils they're considerably less expensive than my i16's...

Everybody OK with MyFreedomSmokes & Fast Tech...???...Thanks...Trig :D
 

Two_Bears

Vaping Master
ECF Veteran
Verified Member
Jul 4, 2015
7,045
16,673
Northern Arizona
Correct.

Most. Snall batteries lime Vision Spinners Ego-t, X6, X9 will not fire below. 1.2 ohms

It is a fixed output device so you are stuck with whatever the factory thinks in a good vape.

The tank may or may not work with your spinners depending on the specs. I think the evods I had were limited to 1.5ohm.
 

AXIOM_1

Vaping Master
ECF Veteran
  • Jul 6, 2015
    4,874
    12,939
    Pennsylvania, USA
    Not if you mix a batch and double the nic :)

    lol .... yeah and if she mixes the batch with x10 nic then she will quickly get nic sick and then she won't be able to vape much after that... problem solved.
     
    Last edited:

    AXIOM_1

    Vaping Master
    ECF Veteran
  • Jul 6, 2015
    4,874
    12,939
    Pennsylvania, USA

    Trigster

    Super Member
    Aug 2, 2017
    820
    4,695
    SF Bay Area

    AXIOM_1

    Vaping Master
    ECF Veteran
  • Jul 6, 2015
    4,874
    12,939
    Pennsylvania, USA
    Great Info. & Thanks Very Much...Also it's already a done deal...:D
    T 18 Starter Kit / Extra Tank / 5 Extra Coils...On my Doorstep...$44...That hardly hurt a bit...!!!

    I Really Appreciate Your In-Put...Trig :thumbs:

    @Trigster ...if you are a tootle puffer, then that is a very good kit to select for sure........ Flavor is superb from whatever juice you use...... Just don't expect massive amounts of vapor because at 14watts and 1.5 ohm coils you won't get that... On the other hand, this device delivers a vape that provides a sensation/experience that is very similar to smoking, so it is good for either people trying to come off of cigarettes or for vapers who are mouth-to-lung type inhalers.... Even though it is a mouth-to-lung type vape device, it still delivers quite a bit of vapor.... Good choice!
     

    petrotech

    Ultra Member
    ECF Veteran
    Verified Member
    Feb 9, 2015
    1,761
    9,330
    indiana
    easiest way to mix....less than 15 minutes making 1000ml. that's including setup and cleanup. lol

    throw it in a pitcher and shake every once in a while for a couple days and she's ready to go! lol.
    d7e3316e33a8f061450603b4b1579752.jpg
     

    corn flakes

    Ultra Member
    ECF Veteran
    Verified Member
    Dec 29, 2014
    2,852
    19,931
    Brant County Canada
    easiest way to mix....less than 15 minutes making 1000ml. that's including setup and cleanup. lol

    throw it in a pitcher and shake every once in a while for a couple days and she's ready to go! lol.
    d7e3316e33a8f061450603b4b1579752.jpg


    Looks easy. That would last me almost a year,
     

    petrotech

    Ultra Member
    ECF Veteran
    Verified Member
    Feb 9, 2015
    1,761
    9,330
    indiana
    Looks easy. That would last me almost a year,
    it lasts me about 4 weeks, but I give most away. lol. I used to mess around with syringes and scales, but after using the same flavor for awhile, I got the 1000ml tube and never looked back.
     

    AXIOM_1

    Vaping Master
    ECF Veteran
  • Jul 6, 2015
    4,874
    12,939
    Pennsylvania, USA
    it lasts me about 4 weeks, but I give most away. lol. I used to mess around with syringes and scales, but after using the same flavor for awhile, I got the 1000ml tube and never looked back.

    right on brother, my kind of DIY .... That's about how I do things :) .......... I am so used to mixing now days that I just sort of throw things together (without much measuring) and it works fine for me :)... But then again, according to most people, I am not quite "normal" either :w00t:
     

    Users who are viewing this thread