Tootle Puffers, Part Three! (The Sequel of the Redux)

Bea-FL

Vaping Master
ECF Veteran
Verified Member
Jul 7, 2016
3,094
62,467
Florida
We are going great guns. I have been a bit distracted by my art and still in the happy vaping place.

We have been working on a new project, still in prototype but a neat result. Said tongue in cheek

Welcome to the second viewing of "Panels By Us" a merging of the technical genius of GT, the incredible micro management of Baz and the artistic brilliance of Crisscross (krisma). I present to you the Panels By Us.......BB Rev4 plates

Base plates by GT, (GT_1955)
Panels and buttons by Crisscross (krisma)
Finishing and Driptips by Baz

These are the final prototypes and the actual panels will be done next week. They are a 3D printed base with resin panels installed into a channelled face. Just FYI Panels by Us is not a real company and they are not being produced for sale. It was a challenge to work through the process and something new for us to tinker with. The red ones are because GT likes red and the turquoise ones are mine.

WSkWWxp.jpg


N1mH0Qb.jpg
Good to see you again. We missed you :wub:

They are stunning!
 

stols001

Moved On
ECF Veteran
May 30, 2017
29,338
108,119
I hope the sixties roll around soon, those fashions really suit my body type, and no, jeans makers, bootcut jeans are NOT the same as bell bottom jeans.... I have fears that it's the eighties that's on the return at the moment and I Just Loathe shoulder pads, but there seems to be a rekindling of interest in that era.... God, I hope I don't have to get a perm or something, aiee. :) As far as nothing new, when we start tearing down our history and teaching whitewashed versions of history in schools, it's inevitable. I'm just glad that the trend of naming girls after cities (Paris Hilton, I am speaking to your parents, I'm quite convinced the name caused the exhibitionist behaviors) is dying down at last, somewhat.

Karisma, those are some beautiful mods... They truly are and the driptips are amazing. :)

LOL, I have not purchased the von erl. I guess if it's not around later, I'm going to just be fine without it, LOL.

EnablerU sounds like a university Trump might start, LOL, but I am resisting... Also, what's with the bashing of Trump for providing some of his *own* money to aid in disaster relief, I don't recall that happening with other presidents and they were perfectly happy to send disaster relief through the taxpayer's money. I get that it's going to be a drop in the bucket in comparison to what is ultimately needed, but I really don't get why people are all up in arms about it. And of COURSE he's going to deduct it on his taxes, but so what? I'd do the same thing if I provided a million dollars to disaster relief!

Okay, I'm digressing... The main vape comment here is I am boasting about my awesome self control, LOL.

Anna
 

Krisma

Vaping Master
ECF Veteran
Verified Member
Jul 4, 2014
8,800
46,582
Australia
Good to see you again. We missed you :wub:

They are stunning!


:wub: Bea thank you. I am still around We set up a studio for me and with so much space I just hunkered down and got caught up in playing with paint and resin. These panels were a great project for us all to get involved. GT mastered his 3D printer and they turned out brilliant.
 

DPLongo22

"Vert De Ferk"
ECF Veteran
Verified Member
Dec 17, 2011
32,962
182,721
Midworld
Hey Longo,

Trying to decide whether or not to give up the man-bun.

Then, there's that porn-stache situation going on.

These are difficult decisions, for sure.

Have you considered consulting a Magic 8 Ball? Those have really helped me through some very difficult decisions, particularly when considering wardrobes for a particular event.
 

DPLongo22

"Vert De Ferk"
ECF Veteran
Verified Member
Dec 17, 2011
32,962
182,721
Midworld
We are going great guns. I have been a bit distracted by my art and still in the happy vaping place.

We have been working on a new project, still in prototype but a neat result. Said tongue in cheek

Welcome to the second viewing of "Panels By Us" a merging of the technical genius of GT, the incredible micro management of Baz and the artistic brilliance of Crisscross (krisma). I present to you the Panels By Us.......BB Rev4 plates

Base plates by GT, (GT_1955)
Panels and buttons by Crisscross (krisma)
Finishing and Driptips by Baz

These are the final prototypes and the actual panels will be done next week. They are a 3D printed base with resin panels installed into a channelled face. Just FYI Panels by Us is not a real company and they are not being produced for sale. It was a challenge to work through the process and something new for us to tinker with. The red ones are because GT likes red and the turquoise ones are mine.

WSkWWxp.jpg


N1mH0Qb.jpg

Well YOU certainly snuck right in here.

Howdy, XX, and "WOW!!!!"
 

CMD-Ky

Highly Esteemed Member
ECF Veteran
Verified Member
Sep 15, 2013
5,321
42,395
KY
These are difficult decisions, for sure.

Have you considered consulting a Magic 8 Ball? Those have really helped me through some very difficult decisions, particularly when considering wardrobes for a particular event.

And you are known far and wide as a true sartorial delight, the fashion maven of the Midworld
 

skyboxer1968

Super Member
ECF Veteran
Jan 28, 2015
439
1,503
Illinois
Another rebuild this morning, and I think I got it right this time. Really picked the coil up away from the deck this time. It's a 2mm coil, and nearly off the deck as much as the coil OD.
As you can see, Theorem glass does fit the Erkl nano. No leaks, but the steel-over-glass version looks weird, especially from the top.
10ef7304233d58b200f55ad3972b2b37.jpg
3152a7d3c2f429f7ecf0d950c28faf19.jpg


Sent from my XT1650 using Tapatalk
 

stols001

Moved On
ECF Veteran
May 30, 2017
29,338
108,119
Here's some pics of the two beings who I spent most of yesterday with: I was very glad to have my vape with me, LOL:
6K9ImmX.jpg


The kid that finally got me vaping, LOL. Isn't he cute? I know I sound like doting moms everywhere, but this kid is seriously likeable, he truly is. I'm so glad I told him not to use his good looks to get women because there's always SOME chick scoping him out, though he often remains oblivious.... LOL.

cO99rdi.jpg


She looks angelic, doesn't she? Don't be fooled, she's got the meanest mad-face ever. This dog is also addicted to cigarette butts (she was a homeless person's dog and my son adopted her because she was due to be euthanized the next day. She seriously has to be watched at all times, or she'd basically come take your cigarette right out of your hand, LOL. Then, she pukes, so we always know if she's found *something*.) I love this dog to death, actually, and she loves me right back (with nothing like the devotion of my son, but I seem to represent some sort of stability for her... I was using behavioral techniques on her to get her to stop barking at the slightest provocation, but then I realized I couldn't anymore since she was my kiddo's dog and if I trained her, that would be bad.) I'm a good person at the vet though since I'm tough, so I just grab her and hold on while my kid distracts her, and she seems to respect that, LOL. She is seriously the sweetest dog but she has PTSD I think.... They put her on steroids and abx, and we were a call-in so we were there for awhile... I don't know how that dog is going to do with the Roid Rage, but I'm going to find out today, since she and the Kid are coming for dinner, LOL. I seriously asked the vet about that, but he said she would be fine. She was actually better behaved than this couple who came in with a huge mastiff that was supposedly "A service animal." It had the official vest, not a companion animal, supposedly a REAL service dog. The vet walked up to it all happy to say hi, and the dog lunged for him and barked at him, he looked startled and leapt about a foot backward... Sheesh! Then the couple was like, "We just got him recently, this is his first trip out." That must have either been a lie, or a lot of good training completely undermined very fast. It took all the Vape I had to not spit out, "Get that *&&^&*($$ service jacket off that damn dog! What if it was a small child that happened to?" Sheesh. At least we WARN people we have a half-feral dog, we don't load her up with a service jacket. I always go with my kid to the vet as the LAST thing I want for her is to be put down for biting someone.

Some people shouldn't have dogs. K, don't know where this rant emanates from, but I'm glad I don't have to go out today much, I am going to be starting another DIY batch! Mmmm... I really think I'm going to try adding coco to my mixed berries mix and see what happens, also. :) Also, it WAS my hussar that arrived, so if the husband goes out today, I plan to build it....

Anna
 

ToolmanTexas

Ultra Member
ECF Veteran
Verified Member
May 14, 2014
2,747
14,648
T for Texas!
Another rebuild this morning, and I think I got it right this time. Really picked the coil up away from the deck this time. It's a 2mm coil, and nearly off the deck as much as the coil OD.
As you can see, Theorem glass does fit the Erkl nano. No leaks, but the steel-over-glass version looks weird, especially from the top.
10ef7304233d58b200f55ad3972b2b37.jpg
3152a7d3c2f429f7ecf0d950c28faf19.jpg


Sent from my XT1650 using Tapatalk
Then this very inexpensive set of glass should work with the Erl:
$3.09 Replacement Glass Tank for Wismec Theorem RTA Atomizer (10-Pack) 10-pack at FastTech - Worldwide Free Shipping
 

skyboxer1968

Super Member
ECF Veteran
Jan 28, 2015
439
1,503
Illinois

corn flakes

Ultra Member
ECF Veteran
Verified Member
Dec 29, 2014
2,852
19,931
Brant County Canada
We are going great guns. I have been a bit distracted by my art and still in the happy vaping place.

We have been working on a new project, still in prototype but a neat result. Said tongue in cheek

Welcome to the second viewing of "Panels By Us" a merging of the technical genius of GT, the incredible micro management of Baz and the artistic brilliance of Crisscross (krisma). I present to you the Panels By Us.......BB Rev4 plates

Base plates by GT, (GT_1955)
Panels and buttons by Crisscross (krisma)
Finishing and Driptips by Baz

These are the final prototypes and the actual panels will be done next week. They are a 3D printed base with resin panels installed into a channelled face. Just FYI Panels by Us is not a real company and they are not being produced for sale. It was a challenge to work through the process and something new for us to tinker with. The red ones are because GT likes red and the turquoise ones are mine.

WSkWWxp.jpg


N1mH0Qb.jpg

You do nice work.

Nice to see you popping in.
 

Users who are viewing this thread