Tootle Puffers, Part Three! (The Sequel of the Redux)

[DancingHeretik]

Digiflavor Siren GTA

I only have one question. How airy is it compared to a Wine?

 

[Katya]

There's an interesting post here at the bottom (#16) speculating that the innokin tanks look to be in the 24mm size range...The Thumb Nail Below Is The Same Image...
Ares, new MTL RTA designed by Phil Busardo and Dimitirs Agrafiotis
View attachment 698099

Has it been confirmed or are we just speculating at this point? If it's 24 mm, it's just plain asinine for an MTL tank. MTL vapers love their MTL mods--22 mm tops.

 

[Katdarling]

From the vid I watched, Phil said it would be a 24mm, Katyaya. If that's changed, I don't know.

And so agreeeeeeeeeeed with you and you, 440. MTL sort of signifies many things, and one of those is a more 'typical' or 'old skool' sized tank. 22 FTW, dahlinks.

I only have one question. How airy is it compared to a Wine?

The Vino, to me, is FAR airier than the Digi, DH. In fact, when I vape the Vino, I use a tank band to cover some of the AFC.

 

[Katya]

And so agreeeeeeeeeeed with you and you, 440. MTL sort of signifies many things, and one of those is a more 'typical' or 'old skool' sized tank. 22 FTW, dahlinks.

Besides, it's perfectly fine to use a smaller tank on a larger mod. Doesn't quite work the other way around. SMH

 

[DancingHeretik]

The Vino, to me, is FAR airier than the Digi, DH. In fact, when I vape the Vino, I use a tank band to cover some of the AFC.

Thank you! In that case, I might just give it a try, maybe.

ETA: Maybe not. It's $37 even at FT!

 

[Trigster]

And Ya' Know...This is where somebody like SXK is gon'a swoop in and have a field day...A decent 22mm version of the Siren 2 that's just a bit taller and hold 3+mls...And I'm a little surprised Digiflavor didn't do exactly that instead of going to 24mm to get the increased volume ???...From what I've seen the deck & chamber for both Siren 2 models are identical...I can't imagine that wider would be that much easier than taller...Beats me...???

 

[r77r7r]

Not really seeing any good mtl factory coils for innokin. 1.6-1.8? I'm doing 1.2 on my new Exceed tank right now and it works ok.

Lol, I remember burning my lips on one of those 1.7 cartos. "Perfectors", or something they called them?

Really enjoying this tank

 

[Trigster]

Not really seeing any good mtl factory coils for innokin. 1.6-1.8? I'm doing 1.2 on my new Exceed tank right now and it works ok.

Lol, I remember burning my lips on one of those 1.7 cartos. "Perfectors", or something they called them?

Really enjoying this tank

I do really like my T18 & T22 tanks and the coils (1.5) are as durable as can be plus I never get any spit-back or feel like they're running hot...Dirt Cheap Too !!!...At $7 for 5 coils from FT they're hard to beat...Trig

But I must admit I'm really looking forward to getting my Siren 2 and hopefully I'll be able to make it work !!!

 

[r77r7r]

I do really like my T18 & T22 tanks and the coils (1.5) are as durable as can be plus I never get any spit-back or feel like they're running hot...Dirt Cheap Too !!!...At $7 for 5 coils from FT they're hard to beat...Trig

But I must admit I'm really looking forward to getting my Siren 2 and hopefully I'll be able to make it work !!!

Agreed, the T series are great, I just can't see them using those types of coils for this application.

 

[Trigster]

Agreed, the T series are great, .

I'm not sure I follow..."I just can't see them using those for this application"...In what way ???...Trig

 

[DavidOck]

Hope y'all can forgive my absence... or was that abscess?

The aliens will tell you, but no need to pass on the info

 

[r77r7r]

I'm not sure I follow..."I just can't see them using those for this application"...In what way ???...Trig

Sorry, I meant that I can't see Innokin using the T22 type coils for the new Busardo tank that is supposed to be using factory coils. Supposed to be a version like that along side of the rta, isn't there? Or do I have that wrong?

 

[Trigster]

Ah...Got'cha...I think a friend had mentioned it'd be nice if the "Drop-In" version (Zenith?) of the new tanks used the T18/T22 coils...But that would make it too easy

 

[brewbear]

I wonder what percent of vapers are MTL. It's probably more than product offerings reflect. It's frustrating but not surprising that there's no such thing as new MTL rda's. The rda I use is a years old design and I can't find anything else, older or newer, that's tempting. May be MTL and rda's will come back in fashion some day. Dream on.

It's a nice dream. If you can deal with the small, nei, minuscule deck (14 mm atty) you might want to try the Hellvape Viper V2 (3 F rendition, good luck finding an authentic ) Prior to finding that, I was usinga Cyclone (v1, not the afc) and hoping to find a couple more that weren't drilled out.

 

[redeuce]

I'm not sure I follow..."I just can't see them using those for this application"...In what way ???...Trig

On 10/17 I emailed Phil asking if there was any way they could make the t18/t22 a compatible coil with the new tank. He responded at that time he didn’t know yet if it would be.
As I look at the schematic of the tank in one of these threads, it shows a large bell cap as part of the chimney. Since the t18/t22 coil serves as the complete chimney, that would rule that coil out for the new tank.

 

[Trigster]

...I think a friend had mentioned it'd be nice if the "Drop-In" version (Zenith?) of the new tanks used the T18/T22 coils...But that would make it too easy

On 10/17 I emailed Phil asking if there was any way they could make the t18/t22 a compatible coil with the new tank. He responded at that time he didn’t know yet if it would be.
As I look at the schematic of the tank in one of these threads, it shows a large bell cap as part of the chimney. Since the t18/t22 coil serves as the complete chimney, that would rule that coil out for the new tank.

Speaking Of A Friend Who'd Mentioned That...I do believe you resemble that remark...LOL...I ordered the Siren 2 so now I'll be branching out into the RTA world...Well see how that goes !!!...Trig

 

[redeuce]

I was looking at the RTA but I imagine the drop in version will have a similar style. If so, would take a coil that screws into bottom cap. I think.

 

[redeuce]

I’m not going to pre judge the tank. But if It’s 24 mm I might stick with Kabuki clone and N2. I’m now running 3 tube mods, and it doesn’t seem to be a good fit.

 

[Trigster]

I’m not going to pre judge the tank. But if It’s 24 mm I might stick with Kabuki clone and N2. I’m now running 3 tube mods, and it doesn’t seem to be a good fit.

I agree they'll both probably be good tanks but the 24mm is an issue for me...The 22mm Siren 2 is only 2ml but I can live with that...And with the other choices out there I think there are reasonable options for RTA's with a bit more capacity...Still...Bet'cha $5 that SXK or someone else is gon'a jump all over the opportunity to make a "Siren 2 Style" tank with a bigger belly...I do hope I can be successful at building coils for that tank...

 

[HappyCamper]

Very pretty! Do tell, where did you get them?

From Angel's Heavenly Designs. If you sign up on Facebook, you can be notified of sales I got my beauties at 45% off