Turbocad's finally selling mods :)

[BobC]

Back to sleep big Aal_

 

[Dee_ell]

Great explaination on the materials..i always thought using stab wood would be much expensive than ultem..but ultem just look so unique for squonker..there are already lots of delrin squonker around..any expected final price yet?


Sent from my iPhone using Tapatalk

 

[Aal_]

Back to sleep big Aal_

Words of wisdom

 

[Raynman]

0. super x drifter(ultem ultem ultem)(dna75)
1. nautilus fan
2. Aal
3. penguiness
4. sqonker
5. 73neb (katalox)
6. benthos( purple double dyed, left in the second pair of blocks)(dna200)
7. clark f(white teak burl)(dna75)
8. distortoblotto(dna75)
9. tpedwards(dna200)
10. havok333(dna200)(blue resin hybrid, right in second pair)
11. Tamer El-Meehy
12. 67Tele(will source own block)(most likely dna75)
13. Kingdal (dna75)(ultem)
14. ghola1was
15. Rossum (DNA75)(wood)
16. spacetime(dna75)
17. want to quit
18. mcpuff (dna75) (ultem) or delrin if available
19. allpeppers (dna 75)( Ultem)
20. ong999(dna75 or 60)(ultem)
21. Balistix(dna75)(ultem)
22. benthos(dna200)(ultem)
23. Dee_ell(dna60/75)(ultem)
24. Robbie Vape
25. keithu2
26. deacon987
27. Unior(DNA75)(stabilized)
28. Ryan Hryciuk
29. laadam(dna75)
30. zulu83 (DNA60 Ultem)
31. piranjah
32. Copterstyle (dna 75)( ultem)
33. adrian13(dna75)(ultem)
34. cheeseofvapes (dna75)(ultem)
35. Raynman some sort of DNA60 with left handed squonk hole

 

[Aal_]

zulu, dna60's won't really be widely available till after October according to evolv, right now they're only releasing very few and I will only have a couple that I'll be building a micro mod with.

if you're looking for a mod like the ultem mod I already posted here then truth is there is really no advantage of the dna60 over the dna75 in that particular mod. the dna60's whole advantage is it's tiny size but it wouldn't make a difference in that mod really

Eagerly waiting for a dna60 design. You think you can make it smaller than the GDNA?

 

[plumeguy]

0. super x drifter(ultem ultem ultem)(dna75)
1. nautilus fan
2. Aal
3. penguiness
4. sqonker
5. 73neb (katalox)
6. benthos( purple double dyed, left in the second pair of blocks)(dna200)
7. clark f(white teak burl)(dna75)
8. distortoblotto(dna75)
9. tpedwards(dna200)
10. havok333(dna200)(blue resin hybrid, right in second pair)
11. Tamer El-Meehy
12. 67Tele(will source own block)(most likely dna75)
13. Kingdal (dna75)(ultem)
14. ghola1was
15. Rossum (DNA75)(wood)
16. spacetime(dna75)
17. want to quit
18. mcpuff (dna75) (ultem) or delrin if available
19. allpeppers (DNA 75)( Ultem)
20. ong999(dna75 or 60)(ultem)
21. Balistix(dna75)(ultem)
22. benthos(dna200)(ultem)
23. Dee_ell(dna60/75)(ultem)
24. Robbie Vape
25. keithu2
26. deacon987
27. Unior(DNA75)(stabilized)
28. Ryan Hryciuk
29. laadam(dna75)
30. zulu83 (DNA60 Ultem)
31. piranjah
32. Copterstyle (DNA 75)( ultem)
33. adrian13(dna75)(ultem)
34. cheeseofvapes (dna75)(ultem)
35. Raynman some sort of DNA60 with left handed squonk hole
36. Plumeguy (DNA75) (black delrin)

 

[turbocad6]

Aal, I've got super tiny in mind, especially the ones with a built in atty...

it's kinda like the first time you see one of those miniature horses, or a bonsai tree kinda cute and tiny, maybe that's exaggerating just a bit, but pretty tiny and the key to those really tiny ones will be the whole docking stations thing, because the battery life will not be big at all.

I will offer additional charging docks that will be pretty cheap to add more docks, so you can put one on your desk, one in your car, one on your work bench, one on your night stand, one next to your toilet think of it like your cordless phone at home, you leave it in it's cradle and then remove it to use it, then return it to it's cradle when done, but you can have cradles in different strategic spots... I can also offer portable chargers, so you can have a very tiny mod that vapes on it's own for a while, then plug it into a brick which will fill the charge up again. the portable brick charger may be able to recharge the little satellite mod 4-5 maybe even 6 times before it needs to be charged itself...

the tiniest mod may actually have about 1/4 the life of a full on 18650 mod, but still be able to hit up to 60 watts, and for what, maybe an hour or 2 on t's own before needing to be docked again. as long as you vape it and return it to a dock often it'll always remain charged, and because the battery capacity will be pretty small it will also charge up very quickly. it will still have a full 8.5ml on board though, and replacement batteries will be pretty cheap too. again this is not intended to be an all day every day mod by any means and I know that this won't be for everybody, but this is a concept that I've had in mind for a few years now and the dna60 finally allows me to do this without compromising the actual vape

I should have a prototype within a week or so, depending on when I receive my dna60's.

 

[turbocad6]

Great explaination on the materials..i always thought using stab wood would be much expensive than ultem..but ultem just look so unique for squonker..there are already lots of delrin squonker around..any expected final price yet?


Sent from my iPhone using Tapatalk

not yet, I should know more in a few weeks

 

[Aal_]

Aal, I've got super tiny in mind, especially the ones with a built in atty...

it's kinda like the first time you see one of those miniature horses, or a bonsai tree kinda cute and tiny, maybe that's exaggerating just a bit, but pretty tiny and the key to those really tiny ones will be the whole docking stations thing, because the battery life will not be big at all.

I will offer additional charging docks that will be pretty cheap to add more docks, so you can put one on your desk, one in your car, one on your work bench, one on your night stand, one next to your toilet think of it like your cordless phone at home, you leave it in it's cradle and then remove it to use it, then return it to it's cradle when done, but you can have cradles in different strategic spots... I can also offer portable chargers, so you can have a very tiny mod that vapes on it's own for a while, then plug it into a brick which will fill the charge up again. the portable brick charger may be able to recharge the little satellite mod 4-5 maybe even 6 times before it needs to be charged itself...

the tiniest mod may actually have about 1/4 the life of a full on 18650 mod, but still be able to hit up to 60 watts, and for what, maybe an hour or 2 on t's own before needing to be docked again. as long as you vape it and return it to a dock often it'll always remain charged, and because the battery capacity will be pretty small it will also charge up very quickly. it will still have a full 8.5ml on board though, and replacement batteries will be pretty cheap too. again this is not intended to be an all day every day mod by any means and I know that this won't be for everybody, but this is a concept that I've had in mind for a few years now and the dna60 finally allows me to do this without compromising the actual vape

I should have a prototype within a week or so, depending on when I receive my dna60's.

That is creativity right there. So you're going with a high drain lipo probably yeah?

Squonks with a hidden atty? That would be nice.

 

[turbocad6]

yeah, tiny hi drain lipo

remember this little guy?

well I'm talking about quite a bit smaller than that even

 

[Aal_]

Lol yeah ... ok I will stop here I don't like ruining surprises

 

[BobC]

Eagerly waiting for a dna60 design. You think you can make it smaller than the GDNA?

Aal, his DNA75 is smaller then the GDNA

 

[turbocad6]

ok guys, I would really like to start lining up the building of some mods for this list in the coming week. it would be cool if those in at least the first 10 spots would try to decide on a material and what dna version they want.

I already know of a few in the first 10 that are still undecided and discussing options with me and one who is not really ready for his mod yet too, I have no problem with anyone that wants to float or is not ready or still undecided and considering options or who just wants to wait for whatever reason, no pressure from me, but on the other hand if that's the case, then don't be disappointed when people below you on the list start to get there mods before you.

I can always come back to the top of the list on each new batch to get anyone that gets bypassed, but it's kind of up to you to decide what you want and how you want it before I can actually build anything for you

 

[distortoblotto]

STAB dna 75. All in!

Happen to have a hunk O'wood if you need it...

 

[turbocad6]

ha, well it's up to you weather you want me to build it from any of the materials I have available or you want me to build it with that, your call bro

 

[Raynman]

That's not a chunk. That's a slab!

 

[hotsauc333]

0. super x drifter(ultem ultem ultem)(dna75)
1. nautilus fan
2. Aal
3. penguiness
4. sqonker
5. 73neb (katalox)
6. benthos( purple double dyed, left in the second pair of blocks)(dna200)
7. clark f(white teak burl)(dna75)
8. distortoblotto(dna75)
9. tpedwards(dna200)
10. havok333(dna200)(blue resin hybrid, right in second pair)
11. Tamer El-Meehy
12. 67Tele(will source own block)(most likely dna75)
13. Kingdal (dna75)(ultem)
14. ghola1was
15. Rossum (DNA75)(wood)
16. spacetime(dna75)
17. want to quit
18. mcpuff (dna75) (ultem) or delrin if available
19. allpeppers (DNA 75)( Ultem)
20. ong999(dna75 or 60)(ultem)
21. Balistix(dna75)(ultem)
22. benthos(dna200)(ultem)
23. Dee_ell(dna60/75)(ultem)
24. Robbie Vape
25. keithu2
26. deacon987
27. Unior(DNA75)(stabilized)
28. Ryan Hryciuk
29. laadam(dna75)
30. zulu83 (DNA60 Ultem)
31. piranjah
32. Copterstyle (DNA 75)( ultem)
33. adrian13(dna75)(ultem)
34. cheeseofvapes (dna75)(ultem)
35. Raynman some sort of DNA60 with left handed squonk hole
36. Plumeguy (DNA75) (black delrin)
37. Hotsauc333 (DNA75) (ULTEM)

 

[ghola1was]

0. super x drifter(ultem ultem ultem)(dna75)
1. nautilus fan
2. Aal
3. penguiness
4. sqonker
5. 73neb (katalox)
6. benthos( purple double dyed, left in the second pair of blocks)(dna200)
7. clark f(white teak burl)(dna75)
8. distortoblotto(dna75)
9. tpedwards(dna200)
10. havok333(dna200)(blue resin hybrid, right in second pair)
11. Tamer El-Meehy
12. 67Tele(will source own block)(most likely dna75)
13. Kingdal (dna75)(ultem)
14. ghola1was (dna200) (darkest wood)
15. Rossum (DNA75)(wood)
16. spacetime(dna75)
17. want to quit
18. mcpuff (dna75) (ultem) or delrin if available
19. allpeppers (DNA 75)( Ultem)
20. ong999(dna75 or 60)(ultem)
21. Balistix(dna75)(ultem)
22. benthos(dna200)(ultem)
23. Dee_ell(dna60/75)(ultem)
24. Robbie Vape
25. keithu2
26. deacon987
27. Unior(DNA75)(stabilized)
28. Ryan Hryciuk
29. laadam(dna75)
30. zulu83 (DNA60 Ultem)
31. piranjah
32. Copterstyle (DNA 75)( ultem)
33. adrian13(dna75)(ultem)
34. cheeseofvapes (dna75)(ultem)
35. Raynman some sort of DNA60 with left handed squonk hole
36. Plumeguy (DNA75) (black delrin)
37. Hotsauc333 (DNA75) (ULTEM)

 

[BobC]

What happened here, sumbody die?

 

[turbocad6]

ha, I working in the shop bro, working on a few stab woods and fine-tuning my processes with the ultem, came up with a way to make the inside as smooth as the outside