Turbocad's finally selling mods :)

[Alexander Mundy]

Just looked at the price of 1.5" sheet Ultem..........

 

[BobC]

Cause it's 'Space Age' material

 

[Henry Etta]

Turbo, these mods look amazing!

BLACK ultem??? ok, yes please... the black is opaque, yeah?

I never could get down with the amber translucent ultem. When the drip tips started showing up, all I could think of was the sucky end of a pacifier

So is it ok if I just put myself on the list? Like this?

0. super x drifter(ultem ultem ultem)(dna75)
1. nautilus fan
2. Aal
3. penguiness
4. sqonker
5. 73neb (katalox)
6. benthos( purple double dyed, left in the second pair of blocks)(dna200)
7. clark f(white teak burl)(dna75)
8. distortoblotto(dna75)
9. tpedwards(dna200)
10. havok333(dna200)(blue resin hybrid, right in second pair)
11. Tamer El-Meehy
12. 67Tele(will source own block)(most likely dna75)
13. Kingdal (dna75)(ultem)
14. ghola1was (dna200) (darkest wood)
15. Rossum (DNA75)(wood)
16. spacetime(dna75)
17. want to quit
18. mcpuff (dna75) (ultem) or delrin if available
19. allpeppers (dna 75)( Ultem)
20. ong999(dna 75)(ultem)
21. Balistix(dna75)(ultem)
22. benthos(dna200)(ultem)
23. Dee_ell(dna60/75)(ultem)
24. Robbie Vape
25. keithu2
26. deacon987
27. Unior(DNA75)(stabilized)
28. Ryan Hryciuk
29. laadam(dna75)
30. zulu83 (DNA60 Ultem)
31. piranjah
32. Copterstyle (DNA 75)( ultem)
33. adrian13(dna75)(ultem)
34. cheeseofvapes (dna75)(ultem)
35. Raynman some sort of DNA60 with left handed squonk hole
36. Plumeguy (DNA75) (black delrin)
37. Hotsauc333 (DNA75) (ULTEM)
38. chellyc (dna75) (ultem)
39. Plumeguy (DNA75) (Ultem)
40. Henry Etta (DNA75, black Ultem)

 

[penguiness]

Added my preference.

0. super x drifter(ultem ultem ultem)(dna75)
1. nautilus fan
2. Aal
3. penguiness (will supply block)(dna60)
4. sqonker
5. 73neb (katalox)
6. benthos( purple double dyed, left in the second pair of blocks)(dna200)
7. clark f(white teak burl)(dna75)
8. distortoblotto(dna75)
9. tpedwards(dna200)
10. havok333(dna200)(blue resin hybrid, right in second pair)
11. Tamer El-Meehy
12. 67Tele(will source own block)(most likely dna75)
13. Kingdal (dna75)(ultem)
14. ghola1was (dna200) (darkest wood)
15. Rossum (DNA75)(wood)
16. spacetime(dna75)
17. want to quit
18. mcpuff (dna75) (ultem) or delrin if available
19. allpeppers (DNA 75)( Ultem)
20. ong999(dna 75)(ultem)
21. Balistix(dna75)(ultem)
22. benthos(dna200)(ultem)
23. Dee_ell(dna60/75)(ultem)
24. Robbie Vape
25. keithu2
26. deacon987
27. Unior(DNA75)(stabilized)
28. Ryan Hryciuk
29. laadam(dna75)
30. zulu83 (DNA60 Ultem)
31. piranjah
32. Copterstyle (DNA 75)( ultem)
33. adrian13(dna75)(ultem)
34. cheeseofvapes (dna75)(ultem)
35. Raynman some sort of DNA60 with left handed squonk hole
36. Plumeguy (DNA75) (black delrin)
37. Hotsauc333 (DNA75) (ULTEM)
38. chellyc (dna75) (ultem)
39. Plumeguy (DNA75) (Ultem)
40. Henry Etta (DNA75, black Ultem)

 

[turbocad6]

the black ultem is not translucent, it is opaque and has a really nice satin black look to it...

 

[AllPepperS]

I like the translucent Ultem, but black might be the ultimate Ultem. I'm in Florida and having something that can simply go anywhere any time of the year is a plus. My wood mods stay inside in the summer, but a little wooden 60 would be great down the line.

Things are good Peng[emoji1360]


Tapapaw[emoji252]

 

[keithu2]

the black ultem is not translucent, it is opaque and has a really nice satin black look to it...

Definitely ultem for me.

 

[Henry Etta]

the black ultem is not translucent, it is opaque and has a really nice satin black look to it...

Excellent, thanks!
Could you list the rough dimensions of each mod? I'm just curious.

*Not of each and every mod... I just mean DNA60, DNA75 & DNA200.

 

[Rossum]

I really like wood mods personally

+1. Given the choice between wood and any other material, I'll take wood every time.

 

[turbocad6]

yeah, nothing quite like the feel of a nicely polished natural wood mod in hand, just so warm and rich and comfortable, not to mention classy and each one is unique

I'll post exact dimensions of all of the mods in a bit

 

[turbocad6]

also to add, ultem feels exactly like a CA finished wood mod in hand...

 

[AllPepperS]

I do agree on wood, it's classic but with my job in and out etc I need a great all rounder and I think Ultem could be it


Tapapaw[emoji252]

 

[BobC]

Dats why you need two!

 

[turbocad6]

ok here are dimensions

dna200 is 4.2" X 2.25" X 1.1"*
dna75 is 3.4" X 2.1" X 1.1"*
dna60 is 2.9" X 1.3" X 1.75"

*the 1.1" thickness of the 200 & 75 is the dimension for a wood mod, ultem allows for a little bit thinner rear wall and door, so the ultem mods are only 1" thick.

wood mods that are hand finished can vary by a slight amount from these dimensions and can often be slightly more or less after there finished.

also note that these mods have rounded profiles which really help them fit the hand better than a boxy corner. a rounded mod will feel as comfortable in hand as a smaller square box. shape has a lot to do with ergonomics beyond just raw dimensions, these dimensions are taken from there widest points. an example would be holding a 2" round tube VS a 2" X 2" square block, the dimensions are the same but the difference in comfort and overall hand fit is HUGE!

 

[BobC]

Hmmmmm, how much thinner
can you make that hybrid DNA60,
using a Nuppin as the atty

 

[turbocad6]

I didn't want to design around an atty that wasn't readily available so I decided to stay with the 22mm format for the most universal appeal. this particular design could be slightly thinner and a bit less width, but not much really the way it is laid out now, as the internal components take full advantage of this configuration and the cell used is fairly wide, but if a mod was designed around a smaller atty and a different cell was used then yeah, a smaller design could be done too

 

[rudy4653]

Added my preference.

0. super x drifter(ultem ultem ultem)(dna75)
1. nautilus fan
2. Aal
3. penguiness (will supply block)(dna60)
4. sqonker
5. 73neb (katalox)
6. benthos( purple double dyed, left in the second pair of blocks)(dna200)
7. clark f(white teak burl)(dna75)
8. distortoblotto(dna75)
9. tpedwards(dna200)
10. havok333(dna200)(blue resin hybrid, right in second pair)
11. Tamer El-Meehy
12. 67Tele(will source own block)(most likely dna75)
13. Kingdal (dna75)(ultem)
14. ghola1was (dna200) (darkest wood)
15. Rossum (DNA75)(wood)
16. spacetime(dna75)
17. want to quit
18. mcpuff (dna75) (ultem) or delrin if available
19. allpeppers (DNA 75)( Ultem)
20. ong999(dna 75)(ultem)
21. Balistix(dna75)(ultem)
22. benthos(dna200)(ultem)
23. Dee_ell(dna60/75)(ultem)
24. Robbie Vape
25. keithu2
26. deacon987
27. Unior(DNA75)(stabilized)
28. Ryan Hryciuk
29. laadam(dna75)
30. zulu83 (DNA60 Ultem)
31. piranjah
32. Copterstyle (DNA 75)( ultem)
33. adrian13(dna75)(ultem)
34. cheeseofvapes (dna75)(ultem)
35. Raynman some sort of DNA60 with left handed squonk hole
36. Plumeguy (DNA75) (black delrin)
37. Hotsauc333 (DNA75) (ULTEM)
38. chellyc (dna75) (ultem)
39. Plumeguy (DNA75) (Ultem)
40. Henry Etta (DNA75, black Ultem)

41. Rudy4653 (DNA75, black Ultem)

 

[Henry Etta]

ok here are dimensions

dna200 is 4.2" X 2.25" X 1.1"*
dna75 is 3.4" X 2.1" X 1.1"*
dna60 is 2.9" X 1.3" X 1.75"

*the 1.1" thickness of the 200 & 75 is the dimension for a wood mod, ultem allows for a little bit thinner rear wall and door, so the ultem mods are only 1" thick.

wood mods that are hand finished can vary by a slight amount from these dimensions and can often be slightly more or less after there finished.

also note that these mods have rounded profiles which really help them fit the hand better than a boxy corner. a rounded mod will feel as comfortable in hand as a smaller square box. shape has a lot to do with ergonomics beyond just raw dimensions, these dimensions are taken from there widest points. an example would be holding a 2" round tube VS a 2" X 2" square block, the dimensions are the same but the difference in comfort and overall hand fit is HUGE!

Thanks, Turbo. Ok, that's amazing... the DNA75 is the same width, a hair shorter, and just about 1/8" wider than my old natural wood DNA40 SVA (which is still one of the smallest regulated squonkers out there). I have tiny girl hands, so it's just not comfortable for me to use bigger mod. So excited about this one!

 

[BobC]

I didn't want to design around an atty that wasn't readily available so I decided to stay with the 22mm format for the most universal appeal. this particular design could be slightly thinner and a bit less width, but not much really the way it is laid out now, as the internal components take full advantage of this configuration and the cell used is fairly wide, but if a mod was designed around a smaller atty and a different cell was used then yeah, a smaller design could be done too

Like an 18650?

 

[turbocad6]

bringing the list foward



0. super x drifter(ultem ultem ultem)(dna75)
1. nautilus fan
2. Aal
3. penguiness (will supply block)(dna60)
4. sqonker
5. 73neb (katalox)
6. benthos( purple double dyed, left in the second pair of blocks)(dna200)
7. clark f(white teak burl)(dna75)
8. distortoblotto(dna75)
9. tpedwards(dna200)
10. havok333(dna200)(blue resin hybrid, right in second pair)
11. Tamer El-Meehy
12. 67Tele(will source own block)(most likely dna75)
13. Kingdal (dna75)(ultem)
14. ghola1was (dna200) (darkest wood)
15. Rossum (DNA75)(wood)
16. spacetime(dna75)
17. want to quit
18. mcpuff (dna75) (ultem) or delrin if available
19. allpeppers (DNA 75)( Ultem)
20. ong999(dna 75)(ultem)
21. Balistix(dna75)(ultem)
22. benthos(dna200)(ultem)
23. Dee_ell(dna60/75)(ultem)
24. Robbie Vape
25. keithu2
26. deacon987
27. Unior(DNA75)(stabilized)
28. Ryan Hryciuk
29. laadam(dna75)
30. zulu83 (DNA60 Ultem)
31. piranjah
32. Copterstyle (DNA 75)( ultem)
33. adrian13(dna75)(ultem)
34. cheeseofvapes (dna75)(ultem)
35. Raynman some sort of DNA60 with left handed squonk hole
36. Plumeguy (DNA75) (black delrin)
37. Hotsauc333 (DNA75) (ULTEM)
38. chellyc (dna75) (ultem)
39. Plumeguy (DNA75) (Ultem)
40. Henry Etta (DNA75, black Ultem)
41. Rudy4653 (dna75)(black ultem)