Since uwell Crown has limited availability, I would pre-order it from any reputable vendor rather than buying from someone who already has it. This would make sure that I get one from the latest batch.
Uwell Crown
- Thread starter Jonner
- Start date
- th_trl_thread_readers 0
- Status
Check that the juice holes seemed lined up when it's juiced up. I noticed that the issues I had with some coils they seem shifted - less only cotton and more of that cotton sheet over metal. The only thing that seems to help these coils is unscrewing the top cap - get bubbles and screw back down. Putting in holes with a pin somewhat helps but since the juice holes don't seem to line up correctly, not much. Wondered if you could just turn the coils to line up correctly on these ones ?
Where did you read this? Would be good to hear direct from Uwell how we can be sure we are buying the 'new' coil.
That explains how I got a few bad coils.
Sent from my SAMSUNG-SM-G900A using Tapatalk
Following is text of the email and the link where I found it.
Hello,
First off, I would like to inform you that the issue with our coils burning out quickly has been resolved. However, there is still a bad batch out there that a few shops/distributors still have a hold of. We are unable to recall the defective coils because we do not know exactly who has received them. We take this matter very seriously and we are compensating all of our customers that have purchased a Crown tank with defective coils, no questions asked. If you would like us to send you a free pack of coils please send the shipping charge of $6.00 to our PayPal account "myuwell@gmail.com" and we will get those sent over to you. Include in the comment section: Your full name, shipping address, and the email in which you used to contact us. Please note that the $6.00 shipping charge is for domestic shipping in the U.S. only and international customers might have to pay more depending on location. Thank you!
Regards,
uwell crown coil heads dry hit
Hello,
First off, I would like to inform you that the issue with our coils burning out quickly has been resolved. However, there is still a bad batch out there that a few shops/distributors still have a hold of. We are unable to recall the defective coils because we do not know exactly who has received them. We take this matter very seriously and we are compensating all of our customers that have purchased a Crown tank with defective coils, no questions asked. If you would like us to send you a free pack of coils please send the shipping charge of $6.00 to our PayPal account "myuwell@gmail.com" and we will get those sent over to you. Include in the comment section: Your full name, shipping address, and the email in which you used to contact us. Please note that the $6.00 shipping charge is for domestic shipping in the U.S. only and international customers might have to pay more depending on location. Thank you!
Regards,
uwell crown coil heads dry hit
i literally signed up just for this thread.
i'm having issues with my stock coils too. primed it according to how quest4vape does it.
searched everywhere for solutions to it
i had no issues when i used the RBA so i ruled out the 'vacuum' part out.
to get mine wicking again, i unscrewed the top cap and had to repeat every 4-5 hits or so..which is a little annoying to deal with.
so would it be incorrect if i presumed my stock coils to be defective :O ?
i'm having issues with my stock coils too. primed it according to how quest4vape does it.
searched everywhere for solutions to it
i had no issues when i used the RBA so i ruled out the 'vacuum' part out.
to get mine wicking again, i unscrewed the top cap and had to repeat every 4-5 hits or so..which is a little annoying to deal with.
so would it be incorrect if i presumed my stock coils to be defective :O ?
I would follow previous post. For $6 you cannot beat getting a new set of coils even if the ones you have aren't defective.
Sent from my SAMSUNG-SM-G900A using Tapatalk
Sent from my SAMSUNG-SM-G900A using Tapatalk
When you get the hang of building on the deck it’s as good as if not better than the stock coils. I’m running a 26ga 2.5mm – 5 wrap on the deck. After many attempts, dry hits and a juice river or two this method rocks.
Once the coil is in and you thread your cotton cut it about 2mm’s longer than the screw out portion of the deck. Pancake the cotton back towards your coil and slide the head back (cap) onto the deck. Working the cotton from the bottom (closest to the deck) to the top gently work your cotton down to the deck, don’t pack it. Prime it and rock the Crown.
The deck is a little finicky and small but once you get it right you save yourself a ton of money on coils and the flavor and vapor is outstanding.
Once the coil is in and you thread your cotton cut it about 2mm’s longer than the screw out portion of the deck. Pancake the cotton back towards your coil and slide the head back (cap) onto the deck. Working the cotton from the bottom (closest to the deck) to the top gently work your cotton down to the deck, don’t pack it. Prime it and rock the Crown.
The deck is a little finicky and small but once you get it right you save yourself a ton of money on coils and the flavor and vapor is outstanding.
I've got no issues building on this, apart from the tricky wicky ,it's much easier than my other tank (subtank mini) IMO..just holding on til my titanium wires come in, the i'll try a titanium build
any ipv 3 li/temp control mod users out there?
i'm new at TC , what Joules/Temp is ideal for this tank?
any ipv 3 li/temp control mod users out there?
i'm new at TC , what Joules/Temp is ideal for this tank?
If not they have lost me. Way too many tanks out now to deal with crappy carts like I have been getting
Well on 2nd tank now and its just the same. .5ohm running 45w.....just no bubbles. Going back to the triton and have the mutation x mt-rdta coming. So gonna leave the crown to rest for a few months and hope the bad coils are gone by the time i come back to it. I did email and send $6 to them so if they come in i will post how they are working.
I'd be careful with that without contacting them first. It sure could be a scam...and might I say, a pretty clever one too. LOLHave a look at the link I mentioned with this email text. There are other people as well who contacted them and got similar answers. I agree though that one should be careful.
I would imagine people that email Uwell at their general customer service / contact address might get that email and those people, on record with Uwell, could take advantage of the offer.
If that address is set-up for PayPal purposes, it might not be monitored for inquiries and basic communication, and only notify Uwell when a payment is sent.
That said, I agree with @Mr.Mann, it could be a very clever scam...
If that address is set-up for PayPal purposes, it might not be monitored for inquiries and basic communication, and only notify Uwell when a payment is sent.
That said, I agree with @Mr.Mann, it could be a very clever scam...
I will contact them and see what happens. Tonight I was driving home, enjoying the 0.5 that I primed last night. All was going well a couple hours into the new coil, then suddenly a dry hit around 53 or 55w. After that, the flavor tasted muted though not really burnt.
I stopped in a local vape shop and grabbed the 1 remaining Herakles nickel coil they h3ad left. While I was there, they removed the Crown from the display case and did not want to discuss it. I looked at the Starre Pro but did not pull the trigger. Hopefully the nickel TC coil will calm the beast we know as Herakles. What a beast it is for those who like hot dense storm clouds. Puts hair on your chest, as my father used to say about Reds.
Thanks for the Crown info. Hopefully not a scam. I did not consider that possibility, so I appreciate the heads up from this group.
Mike
I stopped in a local vape shop and grabbed the 1 remaining Herakles nickel coil they h3ad left. While I was there, they removed the Crown from the display case and did not want to discuss it. I looked at the Starre Pro but did not pull the trigger. Hopefully the nickel TC coil will calm the beast we know as Herakles. What a beast it is for those who like hot dense storm clouds. Puts hair on your chest, as my father used to say about Reds.
Thanks for the Crown info. Hopefully not a scam. I did not consider that possibility, so I appreciate the heads up from this group.
Mike
I thought I was having issues with my new coil but it just needed an extra day to break in. I thought I had a bunk one. Hope it continues like it is going now! I still can't believe how well this tank has worked for me, especially considering others have had issues. I never had such luck with gear like this!
- Status
Similar threads
- Locked
- Locked
