Valley View Vapes - **Official Information and Chit Chat Thread**

[lisancentraltx]

Yeppers :/ I need drip tips since I use A LOT OF ACIDIC juice like cinnamon, but I am not sure what kind of tip to buy... I have been using what I got with the item until I found something magnificent, 'cuz magnificent drip tips is WAY expensive :/

I worry about drip tips later, for now I am on a grommet/cap hunt... I keep trying to recycle what vape gear isn't trashed to keep the amount of vape gear I have in one cart... darned thing is full and I have new juice on my desk and more incoming. Now I am trying to salvage the tubes from the DC tanks I bought awhile ago :/ I am trying to find grommets/o-rings or caps/o-rings to fit them... All of the o-rings that Ray has are a different OD, so I need to go to a auto supply store to get measure or sumthin :/ I'd hate to go back to wearing curlers just to find a use for these DCT tubes XD

Then I have 3-4 VV/VW PVs coming in and just 2 new batteries, so I will need some more nice protective batteries. Problem is, some 18650s are labeled as 3300 - 4000 mAh with great prices and ppl are reporting that these are BS repackaged or relabeled 2600 mAh batteries with letters directly from the manufacturer stating they have a 2600 mAh limit... So, I wait to find out WTH is what bcz I ALREADY bought 2 AW 18650 protected 3100 mAh rechargeable lithium battery (AW18650P31) for $37.98 and I hope I wasn't bent over and violated :/ Update for this is Ray is changing stock, so I have to see what he's got that's new.

After that, I need to sit down with my gear and figure out what has lasted from the Kanger T0s to the Karger T5s and the CE1s to the CE9s... I had some that were polycarb and discolored from juice but had a magnificent carto & lasted forever, I had some that cracked immediately upon being used with an eGo Twist or Zmax, and all of my VVV tanks in use have had the carto replaced with no other issues - and I replaced them when using a lemonade that made everything leak...

FREAKY DIY ROCKIN MY WORLD: Green Apple, Lemonade, Cinnamon, Pluid, Sweet Tart, Koolada, Melon mix

 

[Vince Clortho]

I got some Cola juice from one vendor. I tried it in a kanger style t2 and it melted the entire thing - literally fell apart in minutes. I hopped on the innerwebs and found Ray. Been here since.

 

[lisancentraltx]

When I was an auditor/inspector, I visited sites where pepsi & coke syrup ate through the bottom of trucks, tires, and polished all remaining metal so I am not surprised

 

[glassmanoak]

@lisa, I really like stainless steel drip tips. I got one that is gold plated from Empire Mods and I dearly love the look and the smooth feel.

 

[RayN]

The thing I dislike about the metal drip tips is that I guess I'm too heavy of a vaper. They get uncomfortably hot.

Lisa, I'm 99.99% sure that Delrin drip tips resist all juices, just not sure who stocks them.

 

[MrPicC]

What bout titanium?

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

 

[Uncle]

What bout titanium?

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Actually, I'm getting at least one this week that I was lucky enough to have won in a contest . . . AND - From what I understand they do not get hot like some other metals do . . . Also this vendor hand crafts them to suit your needs - sized: small, med, large; Groved, Colored, etc. - both in Titanium and Stainless Steel . . .

 

[jralabate]

The thing I dislike about the metal drip tips is that I guess I'm too heavy of a vaper. They get uncomfortably hot.

Lisa, I'm 99.99% sure that Delrin drip tips resist all juices, just not sure who stocks them.

If u use a big ming SS drip tip it will stay cool

 

[RayN]

I haven't tried all the different varieties of drip tips out there.
I have very simple tastes in vaping equipment. I'm not into the whole fashion aspect of it personally. If I only made tanks the way I used them they'd be all one size, same resistance, same color everything. I just want stuff that works. LOL

 

[jralabate]

I haven't tried all the different varieties of drip tips out there.
I have very simple tastes in vaping equipment. I'm not into the whole fashion aspect of it personally. If I only made tanks the way I used them they'd be all one size, same resistance, same color everything. I just want stuff that works. LOL

I just love the feel of the SS ming drip tips in my mouth.......and before anyone can say it "Thats wut she said" BAZINGA

 

[Uncle]

I haven't tried all the different varieties of drip tips out there.
I have very simple tastes in vaping equipment. I'm not into the whole fashion aspect of it personally. If I only made tanks the way I used them they'd be all one size, same resistance, same color everything. I just want stuff that works. LOL

I Could NOT - AGREE WITH ANYONE - As Much As I AGREE With "YOU" on these "Statements" ^ ^ ^

ALL - I ever really want and "NEED" is the simplest to use . . . And if it takes more than just putting a couple of things together to use - like all the RBS's - Then NOT FOR "ME" . . .

That is why I am always getting so confused and fraustrated so many times, especially when so many different vendors "Re-Brand" the exact same item that is being sold everywhere else as theirs and the only place you can get it . . .

That is also one of the reasons that I am so pleased that I found "YOU" and what you offer . . .

Good Products - Sold at Reasonable Prices too . . .

 

[MrPicC]

Uncle. What type of vvv tanks do u prefer and do u use?

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

 

[Uncle]

Uncle. What type of vvv tanks do u prefer and do u use?

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Honestly - I couldn't tell "You" what I prefer, especially since I think the 2 I have are the "Pyrex" with the Metal Caps (the "Sidewinder" I had was the one I lost on "my" trip North) . . . 1 I purchased and the other was grausously sent to "Me" as the one chosen by all of "YOU" for the person to get the "Secret Santa" . . . AND - Since I haven't been "Vaping" full-time yet, I have only been using one of those right now with "glassmanoak's" Absinthe . . .

SO Delightful not having to keep changing and filling just a Cartomizers all the time . . . AND - Although it was a little difficult to fill - it has been very easy to use on a couple of different PV/VV APVs . . .

Now - May I ask Why "You" would like to know . . .

 

[MrPicC]

Because that's my right.


Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

 

[Uncle]

Because that's my right.


Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Oh If I didn't "like" Ya' . . .

 

[RayN]

I haven't tried all the different varieties of drip tips out there.
I have very simple tastes in vaping equipment. I'm not into the whole fashion aspect of it personally. If I only made tanks the way I used them they'd be all one size, same resistance, same color everything. I just want stuff that works. LOL

I hope no one takes that the wrong way. I think it's pretty neat that people want such a wide variety. It caught me by surprise when I started this business though. I thought I'd just be making the same tank over and over and over. This is definitely more challenging, but more interesting too!
I can't even do the math to come up with all the different models I have if you went by each possible combination of colors etc.

I just hope all my customers continue to be understanding about processing times. As demand keeps growing it's going to take longer to get orders shipped out. I don't anticipate ever expanding to the point of hiring employees because I wouldn't be able to keep my prices so low and that's my main goal.

 

[jralabate]

I hope no one takes that the wrong way. I think it's pretty neat that people want such a wide variety. It caught me by surprise when I started this business though. I thought I'd just be making the same tank over and over and over. This is definitely more challenging, but more interesting too!
I can't even do the math to come up with all the different models I have if you went by each possible combination of colors etc.

I just hope all my customers continue to be understanding about processing times. As demand keeps growing it's going to take longer to get orders shipped out. I don't anticipate ever expanding to the point of hiring employees because I wouldn't be able to keep my prices so low and that's my main goal.

Well I know all of us here understand about the processing times and I think I can speak for us all "We dont mind one bit" You just keep on cranking out the best tanks on the web and we are happy!!!!

 

[BillLouisiana]

A quality product is worth waiting for. My favorite DIY supplier is down for some period of time and I'm willing to wait for them too.

 

[Uncle]

Well I know all of us here understand about the processing times and I think I can speak for us all "We dont mind one bit" You just keep on cranking out the best tanks on the web and we are happy!!!!

DITTO ^ ^ ^ ^ ^ ^ What "jr" said . . .

AND - I will add that I do not think anyone took that what you said in your OP the wrong way . . . It is true that there are different pieces of Equipment and just as many different Styles and configurations of PV/APVs - For the diversity of People that are "Vaping" today . . .

Heck it is like I said - I Agree with "You" and still do need to find what works for "Me" - it has GOT TO BE SIMPLE & EASY . . . Just as Easy as it was to walk into a store and buy a pack of analogs or this is not going to WORK for "Me" . . . I don't mind a little trail and error . . .BUT if I got to fiddle and make/rebuild stuff (RBA's) and then keeping testing this thing over that thing and trying this one because it is SUPPOSED to be Better - it just gets to confusing so much so that I am fraustrated at times . . . Nope - NA DA - NOT HAPPENING . . .

It's been "scary" enough to think I would ever consider, yet want to quite smoking in the first place - if it were not for those who have gone before "Me" and pointing "Me" in the right direction - I surely would not be here still . . . Thankfully I knew what I wanted and started with a KR808 - Matter of fact, I still use that one today . . .

AND - Because I, like many other who are "Transiting into the World Of Vaping," cannot afford to keep trying stuff with what everything cost today . . . If it were not for the contest that "You" and some other vendors graciously hold for the ECF Community and your customers - I would have not been able to find out how really great your product line is and how easy it can be to use . . .

SO "KUDOS" to "You" - for not only voicing "YOUR" OPINION, but following through with what "You" Believe in by producing a simpler and easy quality product . . .

 

[MrPicC]

I hope no one takes that the wrong way. I think it's pretty neat that people want such a wide variety. It caught me by surprise when I started this business though. I thought I'd just be making the same tank over and over and over. This is definitely more challenging, but more interesting too!
I can't even do the math to come up with all the different models I have if you went by each possible combination of colors etc.

I just hope all my customers continue to be understanding about processing times. As demand keeps growing it's going to take longer to get orders shipped out. I don't anticipate ever expanding to the point of hiring employees because I wouldn't be able to keep my prices so low and that's my main goal.

Even with the suggested build/ship time posted on your site you will always have impatient people complaining! If build time grows well then we are just gonna have to deal with it and suck IT UP. My bud has been waiting on his order to ship but I told him before it was gonna take a while being you were off.. If people that ordered actually took the time to read your posts they'd understand you have a life outside of vvv and that's all there is to it..