Exactly. Were it a ProVari, I'd be raising cane seven ways to Sunday. For <$40 eh.
- Status
finally got mine from vapor break i ordered in early december. chrome, remembers wattage, doesnt warm up. threw an Aga-T on it with a wrie mesh. works great!! for some reason though, most of my delrin drip tips are too loose on the aga-t. had had to double the o-ring to adjust the hole placement.
Heck, it still didn't come for free... it may be less than forty bucks, but nevertheless you're entitled to get a straight connector
Or a refund.
Most of my delrin tips are loose on my AGA-Ts too. That actually sucks for me, since I prefer delrin to 'regular' plastic or metal (of any kind). I'm gonna have to find some fatter o-rings to snug things up.
yea i know. they sell o-ring sets on ebay and amazon. might have to get one to replace o-rings on the tips, and the unit to line the hole up with a snug fit
I got some of the new Boge Vivi Novas and my Sagewood drip tips were a bit loose. Rather than fussing with o-rings I wrapped the bottom of the tips with white silicone plumbing tape. It works very well and you can wrap as much/little of the tape as you need rather than depending on the thickness of the o-rings.
uea i read about both. i dont floss, and im fresh outa plumbers tape, lol. ill try one of them
It's the cheap machining of the connector. Try tightening down the tank being careful not to over-tighten. Make sure the threads are aligned as well and not semi cross threaded. The threads seem a bit loose on some devices.
I just fixed this same problem on my Vamo today. If you look straight down and can see a bigger gap on one side, place a flat tip screwdriver or something to pry with between the outside of the connector and the inside of the topcap. GENTLY pry it towards the larger gap to straighten it out, it doesnt take a whole lot of force. Now all my Nova's sit evenly instead of having a slight kilter to them. Hope this helps
Well I sold my Vamo, had to make room for a second Provari. The Vamo just didn't fit the bill i thought it would, and the VW is not for me, since all 7 of my tanks run the exact same carto. I gave it up after less than a half day of using it.
I like mine because I'm a genesis user & the Ohms vary from device to device... usually based on the juice I keep in 'em. The best thing (for me) is, I set the Vamo @ 9W, and no matter which genny I screw on top, the vape is stellar. Never been a carto fan, so no carto tanks in my arsenal.
If I go to The US This Year I might Buy a Provari and Have it sent to my daughters, Brazilian customs always taxes another 100 USD on top of the buying price it makes it just to expensive!! Provape States the full retail price on the Customs Form!!
posted this in the new members forum but i figured i would post here as well...
Decided to take a few shots of some accessories on the Vamo...
From left to right:
1. Clear Vivi Nova
2. Vivi Nova with black metal tank
3. CE4
4. 2.0ohm bridgeless atomizer hiding behind an eGo cone and stainless tip
5. Kanger MT3 (metal Kanger T3) w/ adapter
Decided to take a few shots of some accessories on the Vamo...
From left to right:
1. Clear Vivi Nova
2. Vivi Nova with black metal tank
3. CE4
4. 2.0ohm bridgeless atomizer hiding behind an eGo cone and stainless tip
5. Kanger MT3 (metal Kanger T3) w/ adapter
posted this in the new members forum but i figured i would post here as well...
Decided to take a few shots of some accessories on the Vamo...
From left to right:
1. Clear Vivi Nova
2. Vivi Nova with black metal tank
3. CE4
4. 2.0ohm bridgeless atomizer hiding behind an eGo cone and stainless tip
5. Kanger MT3 (metal Kanger T3) w/ adapter
I really like the look of the stainless version you have. Mine is chrome but I seeing this I want a stainless version
- Status
Similar threads
- Locked
