@inswva your tmod SX, the color was really hard to get right so it will be a little different in person.
Vape cases
- Thread starter coffeebum
- Start date
- th_trl_thread_readers 0
- Status
That looks bad ayuss brother. Very stoked to start to use it. Thanks JD. That one is gonna get a ton of use.
that is 72 flavors of sexay right there... /drool...
That color combo is working for me brother, I think you hit it just right with the flat dark earth kydex.
okay, shameless plug time -
here are some pix of the one he did for my Sigelei 150watt TC box
molded case, felt lined, with carbon fiber skin (and he includes a fixed belt slide along with the attached clip) - I am SO going to be rocking this for the new Panera cafe opening in NOLA...
completely blown away by the quality of the product, components and build here - exceptional work - would absolutely and unhesitatingly recommend to anyone looking for this kind of carry for a mod... I am going to get a towel now, to clean up the drool... lord, someone fan me and feed me grapes...
(mod in somewhat excited stage...)
here are some pix of the one he did for my Sigelei 150watt TC box
molded case, felt lined, with carbon fiber skin (and he includes a fixed belt slide along with the attached clip) - I am SO going to be rocking this for the new Panera cafe opening in NOLA...
completely blown away by the quality of the product, components and build here - exceptional work - would absolutely and unhesitatingly recommend to anyone looking for this kind of carry for a mod... I am going to get a towel now, to clean up the drool... lord, someone fan me and feed me grapes...
(mod in somewhat excited stage...)
Hittin' like a phat ayuss **** with a big ole bubble bottom.
Dayum that looks sweet sophisticated!
Tapatyped
This holster is sick. Fits like it was molded just for the Sunbox E8 modulo mod. Lol, it was actually. That grey one. But both of these mods will spend ample time in this work of art. Thank you JD. I missed my grey baby but now that it's back and with that holster I'm rockin solid bro.
Mod case list is growing, thanks mainly to some good people on the forums.
Thanks guys!
List of mods I can do cases for:
Beastmode BMI
Billet Box
Custom Classic
Hanna Modz V3 DNA40 pack
Innokin iTaste MVP 2.0
Innokin Coolfire IV
Innokin IPV3 and LI
iStick 30w (clip only)
iStick 50W
iStick 40w TC
Joyetech eVic VT (no sleeve)
Joyetech eVic VT (with sleeve)
Joytech eVic-VTC Mini
Kanger SUBOX Mini
Praxis belt case (also other 22/23mm tube mods)
REO Grand
Sigelei 150w TC
Sigelei 100watt/150watt including Plus versions (no sleeve)
Sigelei 50W VR2 (no sleeve)
Sigelei Mini 30 (no sleeve)
Snow Wolf 200w TC
Sunbox E8 Modulo
Tmodcustoms bottom feeder mod "Boy" mech
Tmodcustoms bottom feeder mod "Girl" mech
Tmodcustoms bottom feeder mod "Tranny" mech (also "Pregger" model)
Tmodcustoms bottom feeder mod "Mini" mech
Tmodcustoms bottom feeder mod SX 350j regulated squonker
Vapor Shark rDNA 40 with Shark Skin
Vapor Shark rDNA 40 without sleeve
Vapor Shark DNA 30 with Shark Skin
Vapor Flask DNA 40
Zero Modz DNA 40
Thanks guys!
List of mods I can do cases for:
Beastmode BMI
Billet Box
Custom Classic
Hanna Modz V3 DNA40 pack
Innokin iTaste MVP 2.0
Innokin Coolfire IV
Innokin IPV3 and LI
iStick 30w (clip only)
iStick 50W
iStick 40w TC
Joyetech eVic VT (no sleeve)
Joyetech eVic VT (with sleeve)
Joytech eVic-VTC Mini
Kanger SUBOX Mini
Praxis belt case (also other 22/23mm tube mods)
REO Grand
Sigelei 150w TC
Sigelei 100watt/150watt including Plus versions (no sleeve)
Sigelei 50W VR2 (no sleeve)
Sigelei Mini 30 (no sleeve)
Snow Wolf 200w TC
Sunbox E8 Modulo
Tmodcustoms bottom feeder mod "Boy" mech
Tmodcustoms bottom feeder mod "Girl" mech
Tmodcustoms bottom feeder mod "Tranny" mech (also "Pregger" model)
Tmodcustoms bottom feeder mod "Mini" mech
Tmodcustoms bottom feeder mod SX 350j regulated squonker
Vapor Shark rDNA 40 with Shark Skin
Vapor Shark rDNA 40 without sleeve
Vapor Shark DNA 30 with Shark Skin
Vapor Flask DNA 40
Zero Modz DNA 40
Can you do the Praxis lined? and how tall is the inside fit?
I have a mold for the Praxis, as well as other 22mm tubes. And sure, I can line it.
There are some more tube mod things in the works as well, but have been too busy to prototype much
I think you may be right!You'll be adding one for the new Reos when it comes out.
But how tall is the inside of it? How much will it cover? I'd like to get something to protect my HOH Custom Nickle Plated Brass DX350 with a Kabuki on it...I have a mold for the Praxis, as well as other 22mm tubes. And sure, I can line it.
There are some more tube mod things in the works as well, but have been too busy to prototype much
I think you may be right!
Realtree is a licensed pattern and I am unable to get that in kydex at this time.
The two main licensed pattern available are Kryptek and ATACs, with several variations available. ATACs NEXT in their "vista" is prob the closest to realtree.
Not something I stock, but not out of the question either. There are other patterns that would work very well for camo, the digital forest I carry is really good.
Patterns I have available right now are these...
It is, however with the size of the pattern it would be better on a larger object than a vape case.
Small as the iStick 50w case is, you might end up with just a stick, maybe a leaf on there. The entire front area of the case is about 2.75" x 3.25" so not much room for the pattern to show.
That is one reason I don't stock larger patterned kydex for the cases. I could still do the ATACs, but fear you would not be happy with the finished product.
Just an FYI
For some reason, in this software, some image links get wonky for tapatalk.
For example, the link above (I assume it's an imgur album from my experience) shows up like this...
Like that^^^
Tapatyped
Last edited:
Just an FYI
For some reason, in this software, some image links get wonky for tapatalk.
For example, the link above (I assume it's an imgur album from my experience) shows up like this...
Like that^^^
Tapatyped
That is strange. Perhaps it is the way I embedded the gallery?
See if this works....
- Status
Similar threads
- Locked
