>> VAPE STOCKING ACTION PLAN: FDA ATTACKS VAPING <<

Status
Not open for further replies.
what about the kanger kbox. are the decent i still have a kangertech wholesale account. i can get them for $29 ea

Sure. Nothing wrong with any supplies from any major manufacturer that I know of.

Kangertech is right up there. buy!
 

Semiretired

Vaping Master
ECF Veteran
Sep 24, 2011
5,404
58,647
Middle Georgia
If you cannot find anything appropriate you might ask in the rebuilds section of ECF. Somebody might have a clue on where to order the parts.

And you want as much in the rebuildable department as you can get unless you plan on stocking up with 45,000 coils to last you umpteen years...
 
And you want as much in the rebuildable department as you can get unless you plan on stocking up with 45,000 coils to last you umpteen years...

45,000 coils? NO. But wire and premade coils may be a thing you decide to stock up on.
 

ad356

Super Member
ECF Veteran
Jul 25, 2010
562
996
44
north java, ny
i was not considering buying coils. i am already successfully making my own coils. i can afford to stock pile wire and cotton, i cannot afford to stockpile pre-made coils. i want a good tank system with a reliable RBA section, something that's going to last.
 

ad356

Super Member
ECF Veteran
Jul 25, 2010
562
996
44
north java, ny
i have to be, if i have to go into debt and pay it off slowly, its still going to be allot cheaper then buying this stuff under prohibition through taxation style taxes. vaping saved our lives, especially my wife. she has COPD and its a medical necessity that she has vaping available. she vapes light nic juice 2MG but she vapes regularly. take that action of vaping away from her and she might consider smoking again. she has COPD smoking 100% is out of the question. she smokes again she could be very well dead in less then a decade. i refuse to allow her to befall that fate. she's 34 years old. she's the girl that has such a strong addiction she once tried the patch. you know she had the patch on her arm and a cigarette in her mouth. patches are very dangerous for that reason, but no one goes after them for the potential of a abuse. sickening

frankly i dont know how much time we have left. things are getting much worse very quickly. areas are already enforcing absurd taxes and i live in NY. its only a matter of time.

im passionate about this fairly new technology, i believe it has already saved lives and we just dont have concrete proof yet. who says a converted vaper might have gotten lung cancer had they continued to smoke. except we cannot prove that person would indeed have gotten sick. that's why its so hard to prove how much safer it is. the person did not get sick. takes allot longer to prove innocence then it does guilt.

bottom line, they can tear my vape from my dead cold fingers in 40 or 50 years, i refuse to give them the pleasure of burning that crap again.
 
Last edited:
  • Like
Reactions: Tommy-Chi

Mowgli

Runs with scissors
ECF Veteran
Verified Member
Mar 25, 2013
8,723
36,953
Taxachusetts
brings me to a question, what is a good tank that has a quality RBA section that has readily available spare parts? i was looking at the protank 4 but i had a difficult time locating spare glass parts. i have an original kanger sub ohm tank, the big one. the tank is still serviceable but i cannot find a replacement glass. the glass finally broke on it. i also seemed to have misplaced the RBA section, can i buy those?
Aromamizer V1 & V2 - @mikepetro has 20 V2's, I have 10 V1 & 10 V2

Colored glass is $2.50 & clear is under $2, decks, o-rings/screws, short caps, etc are all available at Steam Crave's website. I like V2 top on V1 base. V2 top is flat, V1 base has a silly rubber band afc but I can slide it off easily to wipe condensation/seepage. Bottom fill, deck removes with bottom cap so I can rewick without losing the juice in the tank. Some folks like the Supreme better but I don't.
VapeNW has excellent prices on V1 & V2

Dual coil @ 69W - V1/V2 Frankentank on left, V2 in middle, V2 shorty on right

14184322_1824427101121445_3715449575336504476_n.jpg
 
Okay, I was exaggerating - a little bit... :rolleyes:

If someone refuses to learn how to build coils, for whatever reason, I'd say 25 coils per year for every year you plan to vape is more than enough...assuming you know what kinds of coils you need.
 
  • Like
Reactions: Eskie
i have to be, if i have to go into debt and pay it off slowly, its still going to be allot cheaper then buying this stuff under prohibition through taxation style taxes. vaping saved our lives, especially my wife. she has COPD and its a medical necessity that she has vaping available. she vapes light nic juice 2MG but she vapes regularly. take that action of vaping away from her and she might consider smoking again. she has COPD smoking 100% is out of the question. she smokes again she could be very well dead in less then a decade. i refuse to allow her to befall that fate. she's 34 years old. she's the girl that has suck a strong addiction she once tried the patch. you know she had the patch on her arm and a cigarette in her mouth. patches are very dangerous for that reason, but no one goes after them for the potential of a abuse. sickening

frankly i dont know how much time we have left. things are getting much worse very quickly. areas are already enforcing absurd taxes and i live in NY. its only a matter of time.

im passionate about this fairly new technology, i believe it has already saved lives and we just dont have concrete proof yet. who says a converted vaper might have gotten lung cancer had they continued to smoke. except we cannot prove that person would indeed have gotten sick. that's why its so hard to prove how much safer it is. the person did not get sick. takes allot longer to prove innocence then it does guilt.

bottom line, they can tear my vape from my dead cold fingers in 40 or 50 years, i refuse to give them the pleasure of burning that crap again.

I can't even begin to tell you how messed up on Marlboros I was. Man-O-Man are those things addictive, and the phlegm and choking. Those bstds are really something to be selling that crap. Heartless.
 
Last edited:

Semiretired

Vaping Master
ECF Veteran
Sep 24, 2011
5,404
58,647
Middle Georgia
If someone refuses to learn how to build coils, for whatever reason, I'd say 25 coils per year for every year you plan to vape is more than enough...assuming you know what kinds of coils you need.

For me - wicks lasts 3 -5 days and the coils can last 2 weeks plus so you 25 is ample, but if you only want to plug and play more may be better. Some people only get a week to 10 days from a factory coil...

I would hope that anyone stocking up would at least put something that is rebuildable into their stash - it just makes sense...
 
Aromamizer V1 & V2 - @mikepetro has 20 V2's, I have 10 V1 & 10 V2

Colored glass is $2.50 & clear is under $2, decks, o-rings/screws, short caps, etc are all available at Steam Crave's website. I like V2 top on V1 base. V2 top is flat, V1 base has a silly rubber band afc but I can slide it off easily to wipe condensation/seepage. Bottom fill, deck removes with bottom cap so I can rewick without losing the juice in the tank. Some folks like the Supreme better but I don't.
VapeNW has excellent prices on V1 & V2

Dual coil @ 69W - V1/V2 Frankentank on left, V2 in middle, V2 shorty on right

14184322_1824427101121445_3715449575336504476_n.jpg

I'll check in to them. Thanks! :thumb:
 

BreSha6869

Vaping Master
ECF Veteran
Verified Member
Nov 21, 2015
4,876
18,564
56
Toronto, Canada
i was not considering buying coils. i am already successfully making my own coils. i can afford to stock pile wire and cotton, i cannot afford to stockpile pre-made coils. i want a good tank system with a reliable RBA section, something that's going to last.
I have dozens of tanks but keep going back to my Subtank Minis.

Parts are readily available and the RBA is a breeze to build on. I have a few STMs I bought at a B&M and recently bought 3 authentic bases, 2 clone bases (really good), 30 sets of o-rings, 10 bell caps, 5 drip tips and a bunch of RBAs. You can buy an authentic base, RBA and aftermarket bell caps and drip tips for about $13 per complete STM. Great deal IMO.

I like the simplicity of them and if the RBA coil dies, I can quickly throw a prebuilt coil in if I am out and about. I like the airflow options much better than with my Aromamizer and Crowns as well.
 
  • Like
Reactions: Tommy-Chi

ad356

Super Member
ECF Veteran
Jul 25, 2010
562
996
44
north java, ny
spare parts.... ok so what do i need. i never really repaired mods i just went on and bought another mod. so if an RX200 needs a new 510 connection how do i know what i should stash away for them? what about replacement i have no idea how to replace said parts.

if i buy certain gear can you guys help me locate what i should be buying for parts, as i said i never really repaired stuff..... too easy to replace. however, im going to operate as if i wont be able to source replacements. that's the point of doing this.
 
  • Like
Reactions: Tommy-Chi
spare parts.... ok so what do i need. i never really repaired mods i just went on and bought another mod. so if an RX200 needs a new 510 connection how do i know what i should stash away for them? what about replacement i have no idea how to replace said parts.

if i buy certain gear can you guys help me locate what i should be buying for parts, as i said i never really repaired stuff..... too easy to replace. however, im going to operate as if i wont be able to source replacements. that's the point of doing this.

Directly from the notes on page ONE. "IF the 510 does not fit flush, buy "510 Varitube v2" connectors for the RX200s and DNA200s that you plan on working on, AND extra 510 connectors in case any of them breaks, so that you can fix them." I bought an assortment of parts for several of my mods because YOU need to be able to fix everything that breaks from here out. Look at what is on the RX200 and buy accordingly. The documents below will also tell you what to buy!

Here is an ECF document on fixing the RX200 model 510 pin:
Replacing the 510 in an RX200

Here are the two videos you need to watch on repairing the 510 connection for the RX200 models. The second video is in French, but the video is really well made and makes it easy to follow.

RX200 510 PIN REPLACEMENT TUTORIAL | MODDING MODS EPISODE #4| DAVE GEE

Tuto connecteur Fat Daddy sur Reuleaux RX200 (IN FRENCH)
 
Status
Not open for further replies.

Users who are viewing this thread