I really can't tell any difference between the 3 and 5mm. I only did it to limit condensation for when I up the power now and again.
- Status
I just got my shipping notice, for an order late on 7 Sept. For an ali order 5 days is pretty decent. Now for the transit wait [emoji3]
Agree, like the Simple EX, would be perfect to me if it were 1000mah. I can get most of the day out of it, but I usually only run it at 3.3v. Good thing is, it charges pretty quickly, even a 15-20 min top off before I leave the house is usually enough to get me though the whole day.The galaxies mtl rdta does fit on the ex, no overhang. A more compact topper, say a Wasp Nano, is a better fit from a subjective looks standpoint.
Upside of the ex is it performs decently and is tiny, downside is it's only about 800mAh. I prefer it to any of the pod systems. A version without the rda at a good price drop would be excellent
I like the included rda that comes with the kit. Being a 19mm RDA, it's a perfect size for the mod, but not sure the kit warrants a $50 price tag. Considering the cost of some pod systems and the fact that it's rebuildable, I'll get my money out of it. Just bothers me to spend that for a disposable device when I can get a full size regulated squonk for the same price. Granted there's no RDA or battery included with others at this price range, but I already have batteries and RDAs I like. Would like to see mod only sold at under $30.
I like my Simple Ex, have been using it daily since I got it. However, in all honesty, it doesn't do anything the Pico Squeeze OG can't do for me. I can build for the Squeeze OG and not need the voltage adjustment. I will probably stick with the Squeeze OG once my Simple Ex dies.
For a while, I would pick up a 'spare' Squeeze OG each time I ordered from FT. Last time, looks like the price has gone up around $4. It's just under $20 for a Squeeze OG now. Still a good deal IMO. The Simple Ex is tiny compared to the Squeeze OG, but the Squeeze is small enough for my needs. Add a decent battery and you have a tiny MTL setup that will last you all day. I also like the hard Squeeze OG bottles when MTL squonking, but I picked up a few of the Luxotic silicone bottles to try in the Squeeze at some point.
Last edited:
I went ahead and ordered another from VaporDNA yesterday. Really liking it and wanted to make sure I had a backup.
Between the fact that distribution in the US is limited as you mention, possibly not getting restocked (or quickly) when they are gone, etc I wanted to play it safe.
Big fan of both this and the Geekvape Ammit RDA. I'm 99% a squonker now, but like that I can use the Galaxies with or without my squonk mods and not have to drip. Have to say though dripping isn't bad for MTL. A little goes a long way. I'm WAY to lazy to drip if I'm vaping DTL.
Did some searching and I think the o-ring on the deck is 18x1x16 mm. Fasttech sells 20 for 80 cents: $0.80 Silicone O-Ring Seals for Atomizer (20-Pack) 20-pack - 18mm*16mm*1.0mm(OD*ID*W) at FastTech - Worldwide Free Shipping
Not sure of the o-rings for the glass. They are flat. Seems to be around 20x1x18... but flat rather than round.
So...something you may want to keep any eye out for....
Mine has started to leak (slowly) from the 510 or, perhaps, around the threads (normal 510, by the way, not the squonk pin). Discovered a small pool of juice yesterday where it had been resting in a stand.
Haven't really troubleshot yet, but I'll have a closer look when I have time.
Mine has started to leak (slowly) from the 510 or, perhaps, around the threads (normal 510, by the way, not the squonk pin). Discovered a small pool of juice yesterday where it had been resting in a stand.
Haven't really troubleshot yet, but I'll have a closer look when I have time.
Same thing here. Been noticing it for a while...wet mod when I take it off. Just checked it now as its been standing on a stand for a while, and yes it is definitely leaking somewhere.
Maybe this will help your situation : Leaking from the pin?: FastTech Forums
Apparently, the first batch of this RDTA doesn't have an O-ring on the 510 pin so some people experienced leaking like you described. If you have a spare o-ring in that size, maybe you can fix the leaking.
Haven't had any leaks so far. But it's good to know. Tank is full now but when I get a chance I'll check if the o-ring is present or missing on the 510 pin.
I took mine apart and it doesn't have an o-ring on the pin. Haven't had any leaking but I'd like to get the o-rings anyway.
I also took mine apart and no o ring. I wrote to Fasttech...waiting to hear.
If anyone finds a link to a specific o-ring that works, please post back here. I picked up a few of this RDTA, only used one so far. Mine hasn't leaked yet, but is also missing the o-ring. I'd like to pick some up just in case.
Same goes for me. Would appreciate a link if anyone finds a suitable one. I have a bunch of o-rings kicking around, but I doubt any would fit.
I'll contact fasttech, at any rate, to see if I can get one sent.
I'll contact fasttech, at any rate, to see if I can get one sent.
My Ali Express vapefly rdta arrived today, less than two weeks from order to delivery [emoji3]
On o-rings, it looks like it's a 3mm ID x 0.5mm CS (4mm OD), based on a quick check with calipers. Something like this: 0.5mm X 3mm S70 FDA Silicone (VMQ) 70 Duro O-Ring [S0.50X003] : The O-Ring Store, We make getting O-Rings easy!
I posted a question on their site, will see if they confirm the size.
On o-rings, it looks like it's a 3mm ID x 0.5mm CS (4mm OD), based on a quick check with calipers. Something like this: 0.5mm X 3mm S70 FDA Silicone (VMQ) 70 Duro O-Ring [S0.50X003] : The O-Ring Store, We make getting O-Rings easy!
I posted a question on their site, will see if they confirm the size.
Last edited:
Mine arrived too today from Ali, took it 13 days all together. 
My unit does have the little O-ring on both 510 pins, so hopefully it won't leak from the bottom.
Really nice little atty.
My unit does have the little O-ring on both 510 pins, so hopefully it won't leak from the bottom.
Really nice little atty.
- Status
Similar threads
