Dang that thing is a monster. It looks like it's gonna beat up those other tanks and take their lunch money!
Vaperz Cloud 25mm VCMT
- Thread starter mtbason35
- Start date
- th_trl_thread_readers 0
- Status
The 510 Adapter for the Drip Tip is in the Package you got. Maybe you overlooked it?! I saw it in another "Unboxing Vid". Also there are some nice Wick Vids on Youtube already and it looks very promising 
Can't wait to see that comming to EU ASAP
Can't wait to see that comming to EU ASAP 
Hmm... this is all that was in the box (minus the Boxer, lol) - no documentation, no adapter. The SS tip is the same size as the delrin so a 510 tip won't fit. Guess I'll send an email to Cloudy Collaborations.The 510 Adapter for the Drip Tip is in the Package you got. Maybe you overlooked it?! I saw it in another "Unboxing Vid". Also there are some nice Wick Vids on Youtube already and it looks very promising
Just watched a couple of YT vids where they unboxed it and neither had a 510 adapter... just the same parts mine came with.
I am. I can't do a big drip tip. Its too bad or I would love to have this.
Haha, no worries! While it's a little strange that they didn't include an adapter, maybe they'll make one soon. I thought it was going to be the same as the 25mm deck-wise and just held more juicy juice, but I'm guessing the deck and everything is bigger. Compared to the Aromamizer deck, I think it's about 1mm wider measuring from the inside edge of the post hole and at it has least 2 if not 3mm more space straight out from the post towards the deck cap... lots of space for tricked out claptons.I did the same and i could not found it again
I've still be hitting it every so often, and while it's no ADV tank for me, it sure hits hard. Next time I open it up, I think I'll try lowering the coils just a bit and see if I can increase the flavor. I also thought about trying 4 vertical coils in it.
Does anybody know where this tank is manufactured?
@Landman do you think the tank is worth the cost of admission?
@Landman do you think the tank is worth the cost of admission?
I'd like to know the same, I'm having a hard time between this and the Geekvape griffin. This being twice the price is the only thing holding me back. I only want the 25mm one, but geez 65 bucks! People seem to be liking them, several reports of leaking due to learning curve with wicking.
Ehh, probably not. If the 30mm was say, $59 and the 25mm was $49, then maybe... that would be the most I could see it going for. The threading isn't anything special or better than normal, it uses a loose wick holding flow control ring, and the 30mm doesn't have a 510 adapter; I don't know if the 25mm does - going off the pictures it looks about the same size as a 510, but at least for the delrin, it's 'built in'... adding a drip tip would make it pretty long.
All that being said, if you were a clapton building widebore drip tip loving RDA type that wanted to get a tank that performed similar an RDA, the 30mm would be a good one to have.
I did lower the coils a bit and got the flavor closer to the Aromamizer, which is nice... not as flavorful, but close enough. I've not had any leaks since that first build where I didn't have anywhere close to enough wick in it. Also, best I can tell, the AFC ring isn't removable.
Cool, thanks @Landman. Sounds like I may be better off trying out the Griffin. I still may pick up the VCMT if Vape Ink still has some in stock, I'll go check them out in person before I make a decision.
That is big. Do you have to wait for the tide to come in before you can vape it??I forgot to check if the threads went all the way down to the base of the deck, but if they do and you didn't put the ring in, the flow ports would be completely closed when it was screwed all the way in and the top of the deck cap wouldn't thread far enough onto the chimney. If you screwed the deck cap onto the chimney first, then it might work without the ring. The ring has a kind of "hold the wicks in place/flow control" purpose.
I tore the build out and made a pair of crazywire 25ga/SS430/7.5 wrap/4mm coils and this time I used like 90% width of the strip of rayon as it comes out of the box (CelluCotton/Sally's). The flow ring is set to about 1/2 flow and it hasn't flooded so far. Started hitting it at 75w in power mode and the AFC is about 1/2 way open, which I'd say is a little more airy than the Aromamizer with all holes open... but it feels more than that with the 12mm ID widebore top. Took it to 100w and it still was just what I would call warm, but o...m...g... talk about a buzz.
Tried the top fill by tipping it just past half way over so the majority of the fluid was near the top and took the cap off and it didn't flood. The fill port is only on one side, so keeping the port at the top, I was able to take a 30ml bottle and get it fuller than the bottom fill method. Another thing about filling though, when I took out the deck to rebuild it, the deck cap stayed in the tank screwed to the chimney. It could have been filled this way to about max capacity, but as there's no way to secure the flow ring, it may be difficult to make sure the deck goes back in without disturbing the wicks and the flow ring not moving around. Since I didn't want to chance it the first time, I took needle nose pliers and unscrewed the deck cap so I could put it on the deck before attaching to the chimney.
I still can't get past the widebore "competition" drip top though... just not my cup of tea as the flavor seemed muted. If they'd added a 510 drip tip adapter, I think it could be an all day tank... maybe they'll come out with one in the future. Someone that likes the big chuff caps may very well love this tank, depending on if the flavor can be dialed in.
Just as a reference, it still hangs over the front of a Reuleaux, but it looks pretty sick on meh lipo Boxer!
Stopped by Vaporz Cloud retail location today, and left with a VCMT 25mm. It fit well on the RX200 I had with me so I was sold.
First build is a fail, couldn't fit the chimney on, so now I'm using it in rda mode, haha. Didn't feel like completely wasting the hive coils I just put in.
Even though I'm not using it correctly, its still a good vape, I'm liking it.
First build is a fail, couldn't fit the chimney on, so now I'm using it in rda mode, haha. Didn't feel like completely wasting the hive coils I just put in.
Even though I'm not using it correctly, its still a good vape, I'm liking it.
If I could find it in stock from a website that took PayPal I'd buy it now. Have some extra money in my PayPal and would make it much easier to take the leap. Still not quite sold on the price tag.
Just found the 25mm (one I wanted) in stock at Infamous Vapes and they accept PayPal. Needless to say, I'll be the proud owner of one of these very soon!
Let me know what works/doesn't work for you if you get to experiment anymore. Videos are pretty limited right now and I usually like to do my homework before receiving hardware. @Landman did you get the wicking figured out? Are you able to top fill without leaking? I remember you said the juice flow control is only set manually during re-assembly I presume.
- Status
Similar threads
