Vaperz Cloud 25mm VCMT

[Landman]

Let me know what works/doesn't work for you if you get to experiment anymore. Videos are pretty limited right now and I usually like to do my homework before receiving hardware. @Landman did you get the wicking figured out? Are you able to top fill without leaking? I remember you said the juice flow control is only set manually during re-assembly I presume.

Yeah, I rewicked it much heavier using almost the full thickness of a strip of rayon per coil and top filled it and didn't have any leaking. I turned the tank on its side keeping the fill port above the juice level and filled it as much as I could. As I put the delrin cap back on I turned it upside down for that last twist of the threading and it did ok. Only filled it once so I'm not sure if it's repeatable or if I just got lucky, lol. I've still got the juice flow at about 50% open.

 

[mtbason35]

Yeah, I rewicked it much heavier using almost the full thickness of a strip of rayon per coil and top filled it and didn't have any leaking. I turned the tank on its side keeping the fill port above the juice level and filled it as much as I could. As I put the delrin cap back on I turned it upside down for that last twist of the threading and it did ok. Only filled it once so I'm not sure if it's repeatable or if I just got lucky, lol. I've still got the juice flow at about 50% open.

Does the wicking keep up at 50% open? Out of the 2 videos I've watched, one kept it all the way open, the other at about 40% open. Both were using high vg so I was a little confused. Different strokes I guess? Lol

 

[Landman]

Does the wicking keep up at 50% open? Out of the 2 videos I've watched, one kept it all the way open, the other at about 40% open. Both were using high vg so I was a little confused. Different strokes I guess? Lol

I'm using 70vg/30, 25ga 4mm SS430 coils, and haven't had any issues, but then I'm not chain vaping it either... I don't need more than 2 hits and I'm done.

If hitting the armomamizer is like sipping some Pappy Van Winkle, the vcmt is like shooting double shots of Crown... kind of wasteful and not really my thing.

I'll definitely keep it the collection cause it's a beast, but it won't see much use overall. I may get the 25mm to try it out. Then I'll probably dream about the 30mm capacity with the air flow of the 25mm.

 

[ThunderDan]

Rebuilt it this afternoon with a build that actually fit the chimney on. Dual 22g Kanthal A1, 3mm ID, 8 wraps @ .22ohm. This thing doesn't even start to get down until I crank it up to 80W.

Wasn't crazy about the wicking, reminded me of trying to wick a Zephyrus RBA, but whatever, it wasn't difficult, just a little more fiddly than something like the MT RTA, or Aromamizer RDTA. I think I got it on my first try, but it wasn't pretty, and I'm hoping next time I'll do a better job, no dry hits yet, and I've cranked it up to 100W.

Juice channels wide open on mine, that's with 80VG, and a generous amount of wick, no leaking when filling, yet.

 

[Jamandre]

 

[Shogun1024]

Leaked my first wicking as well, needs the coil to be packed with a 3mm coil. Now been 5 days without a drip. 22/32ga fused Clapton kanthal a1 5 wraps at 0.08 at 175w. She's a beast for sure

 

[baaadjustin]

I'm needing a new rda, I'm torn between this, crius, griffen, and aromamizer, been seeing reviewer say this one you can't access the build deck without draining your juice, that's a deal breaker

 

[hertigg]

I am now looking into this after being disappointed with the airflow on the crius.

 

[Jamandre]

 

[roxynoodle]

I'm needing a new rda, I'm torn between this, crius, griffen, and aromamizer, been seeing reviewer say this one you can't access the build deck without draining your juice, that's a deal breaker

The HIGO might be out in about 2 weeks also so maybe wait for feedback on that, too.

 

[mtbason35]

I received mine today, threw a 6 wrap 32ga/26ga clapton, 3mm ID dual coil in. Man this thing is full on powerful. I actually really enjoy it, it's very similar to a rda but with the smooth draw that I enjoy from rta's. Clouds are just ridiculous but flavor is on point, this thing will live on my Reuleaux dna200 and all other attys will rotate on the ML Class.

 

[baaadjustin]

The HIGO might be out in about 2 weeks also so maybe wait for feedback on that, too.

Vapenw.com has a black 6 ml aromamizer for 27 including shipping

 

[roxynoodle]

Vapenw.com has a black 6 ml aromamizer for 27 including shipping

I know. I want one, but have 4 silver ones already.

 

[F1zzle]

The HIGO might be out in about 2 weeks also so maybe wait for feedback on that, too.

What's that Higo you talk about? Any Link perhaps? Thx in advance

*edit* Nvm, found it

 

[baaadjustin]

I know. I want one, but have 4 silver ones already.

Haha you sound like me and the subtank mini....have 4, also eyeballing zephyrus v2

 

[Stinkytofus]

Overpriced
Juice control is a bad design
Cant take deck out unless ur juice level is low

It needs a revision for me the justify its price tag imo

 

[Paul lamb]

Anyone know where there is stock in the uk

 

[Jamandre]

Seem out of stock at the moment.

Vaperz Cloud Mega Tank (VCMT) - Evolution Vaping

 

[Jamandre]

 

[dolladave]

I wish it had a 510 drip tip but other than that I love mine and to me, flavor is on par with my aromamizers. Simple dual build. 22 awg kanthal 9 wraps 3mm coil. Runs at 95 watts all day with japenese cotton. Been using it to blow through all my cheap juice lol. Only other major downside is no access to the build deck without emptying the tank.. But at least it' got a huge fill port so it's easy to suck the juice out if you need to