Vapor Flask

[sb713]

Vapor Flask Specifications
• Designed and Manufactured in the United States by Vapor Flask
• Constructed from Solid 6061 Aluminum
• Variable Wattage device
• Stainless Steel 510 Connector
• Spring-Loaded Brass Contact
• Custom Milled Aluminum Buttons
• Micro USB Charger
• Pass-Through Capability
• Ergonomic Design
• Battery: Dual Sony VTC 5 (2600 mAh each)
• Top Mounted LCD Display
• Serialized
• 22mm Profile
• Raw Finish
• Finish Options: Clear Anodized, Gunmetal Anodized
Evolv dna 30 Specifications
• Power Regulated Digital Switch-Mode DC-DC Converter
• Utilizes a Small OLED Display
• Analog or Digital Controls
• Onboard Buttons
• Synchronous Rectification for Maximum Battery Life and Minimal Heat Generation
• Output Power: 7 – 30 Watts
• Output Voltage: 4 – 8.3 Volts
• Output Current: 10 Amps
• Atomizer Resistance: 0.5 – 3.0 Ohms
• Input Voltage: 3.2 – 4.3 Volts
• Input Current: 1.5 – 12 Amps




This Mod looks GREAT, damn it to bad i just picked a DNA30 not to long ago. Wonder how much it'll go for.

The Vapor Flask | VapeRev

 

[Rossum]

Wonder how much it'll go for.

Yeah.

And what the innards look like.

 

[Hammy75]

I heard 299 is the launch price. The one review I watched said its great. Too rich for my blood but if I was in the market for a high end DNA 30 I think this would be it.

 

[AlfyB]

I loved, just loved the look of the device until I realized: as a leftie, I could not use the darn thing! The button would be too high for my thumb, and the atty would be on the wrong side. I guess that will the price to pay if modders come up with more asymmetrical devices...

 

[Draconian]

There is rumor that they may make a southpaw edition.

I loved, just loved the look of the device until I realized: as a leftie, I could not use the darn thing! The button would be too high for my thumb, and the atty would be on the wrong side. I guess that will the price to pay if modders come up with more asymmetrical devices...

 

[TruSound]

Couldn't resist this one, exceptional quality top to bottom, and seems fine left handed.

 

[XBarbarian]

Couldn't resist this one, exceptional quality top to bottom, and seems fine left handed.

WELL played! I just ran across this mod. $299 dual 18650 = 5200mAh of Evolv regulated vapeness! Very Nice!

 

[67Tele]

Hey TruSound-
That's beautiful! I saw the VaporRev article the other night and was smitten (well, as smitten as an old man is allowed to be.) If you get a chance can you post your thoughts on it? Especially using it lefty?

Thanks!

Couldn't resist this one, exceptional quality top to bottom, and seems fine left han

 

[roosterado]

I loved, just loved the look of the device until I realized: as a leftie, I could not use the darn thing! The button would be too high for my thumb, and the atty would be on the wrong side. I guess that will the price to pay if modders come up with more asymmetrical devices...

To rich for my blood but as a fellow Lefty I vape with my right hand because I use my left for-----the mouse> Anyways to get nic I would use my feet if I had to!

 

[Jdbaker82]

Looked great until I saw the price tag.... no way in hell am I paying $299... $150-200 range would have been more realistic

Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2

 

[Rossum]

$150-200 range would have been more realistic

I guess that depends on how you define "realistic".

 

[Jdbaker82]

I guess that depends on how you define "realistic".

comparable to other vaping mods in the market.....

Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2

 

[Rossum]

What kinda mods? Made out of what materials and where, at what cost of labor and machine-tool time?

 

[XBarbarian]

they aren't cheap.. but its also a launch price.. let s see where it goes in a little time... looks like a great device though.. I had been thinking ZNA.. but this looks to trump that.. 5200mAh Evolve..

 

[dr g]

Initially I questioned the idea of making an device that isn't very restricted look like a device that is more restricted (open container). However with the way things are going, in some jurisdictions the hip flask could end up being the less restricted device.

Looked great until I saw the price tag.... no way in hell am I paying $299... $150-200 range would have been more realistic

Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2

No, it would not be "realistic." This does not get made at that price. And no you aren't necessarily entitled to own one if you can't afford the price.

 

[inswva]

I can easily see one of these in my future. I may wait for a user serviceable version - however, the $25 battery exchange program with the current version is pretty reasonable.

 

[Jdbaker82]

$300 is ridiculous I don't care who wants to pay that is willing to pay that etc... the markup is at least 70%

Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2

 

[TruSound]

This old man was smitten the second i spotted it, and rightly so…like I said earlier, it's beautifully made, I can't find any fault with it.

As far as you lefty's are concerned, you'll need to handle one and be the judge…when I use it left handed I keep the contour in my palm and fire with my thumb and it doesn't feel unnatural at all, If I flip it around with the contour away from my palm to fire with My left index finger it's a little slippery, so I don't use it that way. I believe most of you would be fine with it in either hand as long as you keep the contour to palm contact. Here's the left handed grip, easily fired with the thumb, and the atomizer on the top side is not an issue at all.

One of the main things that attracted me to the Flask is the pocket friendly shape, a big selling point for me…have you ever carried a small box in your pocket, not very comfortable.

As far as the $299 price tag is concerned, I think it's very reasonable considering the quality, material used and the machining required to produce the shape, most other desirable box mods carry a $ 350.00 plus price tag, and I'm not talking about a run of the mill Hana that you could build in 1/4 the time it takes to machine a solid block of billet aluminum. JMO

Hey TruSound-
That's beautiful! I saw the VaporRev article the other night and was smitten (well, as smitten as an old man is allowed to be.) If you get a chance can you post your thoughts on it? Especially using it lefty?

Thanks!

 

[TruSound]

Everyone is entitled to their opinion JD…I happen to not agree with yours.

$300 is ridiculous I don't care who wants to pay that is willing to pay that etc... the markup is at least 70%

Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2

 

[Jdbaker82]

I like it a lot and even though I can afford it I won't buy one unless price goes in $199 range to each his own.

What kind of warranty does this come with since we are praising the workmanship so much?

Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2