I don't understand the battery rage, they recommend using the Sony VTC5. If you choose not too then that is on you.
Vapor Flask
- Thread starter sb713
- Start date
- th_trl_thread_readers 0
- Status
I don't believe this.
It is a picture of a dna 30 Vapor Flask and it shows the brass battery plugs in the bottom. Didn't you say they didn't
When the 30 was released, they didn't have battery access yet
The Vapor Flask | VapeRev
Too much for me to keep up with BNEAT but thanks for the update.
I'm sure they didn't expect Sony VTC5 or 4 would be so hard to get. Its a screw-up imo; build something that your customers won't be able to easily find the recommended batts for.
I'm not ......; i just acknowledge that we have to improvise.
E
No i'm sorry if that's what was it sounded like... they went V1 no replaceable batts... V2 dna 30 replaceable batts.... V2 DNA 40. Again peeps correct me if wrong.
Edit: Beaten... Bneat covered it before me.
I don't believe this.
It is a picture of a dna 30 Vapor Flask and it shows the brass battery plugs in the bottom. Didn't you say they didn't
No i'm sorry if that's what was it sounded like... they went V1 no replaceable batts... V2 dna 30 replaceable batts.... V2 DNA 40. Again peeps correct me if wrong.
Edit: Beaten... Bneat covered it before me.
Last edited:
I don't see the problem with the batteries maybe I got lucky but all of my Sony's, mxjo's, and lg he2's work perfectly.
Im really amazed at this dna 40 and temp protection. It works perfectly with my kayfun v4 and now im vaping a dual 28g, 14 spaced wrap ni200 on my 454 big block, it's @ .07 30 watts and it's just amazing. Im flabbergasted lol I've always hated that some juice breaks down when sub ohmed but this.... this is just perfect, and it vapes great all the way until it's dry. Brilliant!
Im really amazed at this dna 40 and temp protection. It works perfectly with my kayfun v4 and now im vaping a dual 28g, 14 spaced wrap ni200 on my 454 big block, it's @ .07 30 watts and it's just amazing. Im flabbergasted lol I've always hated that some juice breaks down when sub ohmed but this.... this is just perfect, and it vapes great all the way until it's dry. Brilliant!
I just took a look at the Vapor Flask DNA30 V2 and it has removable batteries.
Does anyone know if it had the same battery problems as the DNA 40 Flask? It is not really important but I don't think I have heard anyone say "Yup the DNA 30 and 40 had the same problem".
I own a V2 DNA30 but had never put anything in it other than VTC5's and LG HE2's. I do have a pair of calipers and can measure if you like when I get home.
I don't recall much talk at all about battery issues with that revision though. This thread was started when the first revision came out. If there were any problems with battery sizes, it would have been discussed early on in the thread.
I don't recall any changes with the fire button between v1 and v2. The only change that I thought there was, was the user serviceable batteries. All the other changes for each revision that you mention are correct.
The button was upgraded from aluminum on the V1 to stainless on V2 evidently.
The Vapor Flask V2 Powered by the Evolv DNA 30 chip | VapeRev
https://www.eliquidusa.org/ecig-news/vapor-flask-v2-made-better-with-some-enhancements
No prob man... nor did i before that Plumes of Hazard podcast where they had Charlie from VF on... learned a TON about the mod and the modders goals about the device etc. Very cool company/product!
I watched that entire video as well but must have missed the part about the button change.
Hey... it's super possible i missremembered and i got it from a P.Busardo video or some other persons too lol
Yup.... nvm it was Busardo's...
see min 5:52
Yup.... nvm it was Busardo's...
see min 5:52
Last edited:
Not remembering what I watched is bad enough. Not remembering where I watched it really pisses me off!
Not remembering what I watched is bad enough. Not remembering where I watched it really pisses me off!
Welcome to my world Mr. BNEAT and it gets worse.
Hi Guys, Can someone shed some insight on weather these are real or fall in the hoax category. I've been buying AW for "normal" vaping and just getting prepared for a dna 40 devise, so have zero Sony experience Thanks in advance.
Attachments
Don't want to jinx it but closing in on day 2 of my repaired vapor flask, and it looks like this ones a winner... It has Celsius, fires all my mods, and left in the fridge for an hour and fired right up with no glitches
Looks like fifth times the charm
Sent from my iPhone using Tapatalk
Looks like fifth times the charm
Sent from my iPhone using Tapatalk
Last edited:
Whoa... do explain please! Is there some known DNA 40 cold temp issue i'm not aware of? I'm waiting to purchase a Flask and def want the low down on this.
Some people claim it makes an already glitchy board present with a glitch.. So I thought it would be something else to try
Sent from my iPhone using Tapatalk
Ah ok... i can see that in the first rev of the DNA 40 with the issue under the screen ribbon cable... moving around under contraction and expansion maybe. Makes sense.
Been waiting for, what seems like, forever for my Lemo to sit atop my new Vaporflask! It arrived today and is vaping like a dream!
- Status
