Vaptio S150 ATC Kit Contest: looking for TC device testers—Part 2 Officially started

[Shawn Hoefer]

2. Tag/recommend 1 forum member you know who has some good coil rebuilding skills
Dunno, really, anyone that makes fancy coils, but when I started building I learned a lot from @MacTechVpr

 

[Shawn Hoefer]

3. If you are an experienced TC vaper, let us know what TC devices you have; If not, let us know which TC device is in your vape wish list.

Do you really want the whole list? Sigh...
Joyetech eGo ONE VT - Currently fitted with a Ti#1 coil in a CLR head
Xvostick DNA 40 - Currently built with a Ni200 coil in a Kayfun Light Plus V2
iStick TC40W - Currently equipped with a Ti#1 coil in a Kayfun V4
Cloupor Mini+ - There's a Nectar with a Ti#1 coil in it on this one
Luggy 60 - Using the RBA for the Luggy tank, I've installed a Ni200 coil
Kangxin Inoy - The Hastur V2 has a dual SS430 coil tuned with Nickel Purity
Smoant Knight V1 - I built a SS316L coil in the RBA section of the Talos V1
iStick TC60W - I have the Melo RBA set up with a T1#1 coil
KBox 70 - My Subtank Mini is built with a Ti#1 coil
Ele Laisimo P70 - the Billow V2 has a set of Ti#1 coils... got to run duals a little cooler in this
Sigelei 75 - Currently not in TC mode...
eNVy 22 - The Goblin V1.2 fits in this device perfect, but is currently built with Kanthal
eVic VTC Mini - It's sporting the eGo ONE Mega with a Ti#1 coil in the CLR head
Treebox - Rocking the Charon with a dual 316L stainless build
XPRO M80 Plus - Let's not talk about this one and TC...
Cloupor GT - The Aromamizer V1 is on it with a non-TC build
Coolfire IV Plus TC100 - The El Diablo in black looks good on this and performs just as nicely with the dual 316L build in it
iStick TC100W - The Crius V3 is set up with a set of SS430 coils and running in a custom TCR range
iPV4S - This has a dual T1#1 build in the Mutation X MT RTA
KBox 120 - It's a black KBox and I paired it all matchy matchy with a blacked out Monster V3 sporting a single coil SS316L build. Great flavor.
Esige Eiffel T1 - The Zephyrus V2 is on it without a TC build
XCube II - I was playing around with the TFV4 and the TFR3 RBA head, so no TC here
Koopor Plus - The Gemini RTA has a dual SS430 build and is tuned using a custom TCR
Cuboid - I've paired this with the Griffin 22 and a set of 316L stainless coils
Reuleaux DNA200 - Sad to say I wanted raw seething power out of this one for use with the Boreas
iStick 200 is not here yet, but is inbound and I've built the Griffin 25 up with a set of 316L SS coils.
Reuleaux RX200 - And, to compare tanks, the Aromamizer Supreme on this one has the same build as the Boreas

 

[Shawn Hoefer]

4. To use a TC device, what kind of vape stuff you need, like the material of the wire, the rebuid tools, ohm reader, etc
Need? Honestly, nothing at the moment. Always want more wire, and different wires (I've not tried NiFe). Always interested in new tools, too. I have enough to get buy, but...

 

[Shawn Hoefer]

5. Do you know TCR (temperature coefficient of resistance) before? If you do, share the sheets of TCR you knew; If not, simply reply with “Not yet”
Studied TCR hard. Since I review the occasional piece, I wanted to make sure I was familiar with it. I've written several blog posts about it, too.

 

[AlmightyEvan]

3. If you are an experienced TC vaper, let us know what TC devices you have; If not, let us know which TC device is in your vape wish list.

Do you really want the whole list? Sigh...
Joyetech eGo ONE VT - Currently fitted with a Ti#1 coil in a CLR head
Xvostick DNA 40 - Currently built with a Ni200 coil in a Kayfun Light Plus V2
iStick TC40W - Currently equipped with a Ti#1 coil in a Kayfun V4
Cloupor Mini+ - There's a Nectar with a Ti#1 coil in it on this one
Luggy 60 - Using the RBA for the Luggy tank, I've installed a Ni200 coil
Kangxin Inoy - The Hastur V2 has a dual SS430 coil tuned with Nickel Purity
Smoant Knight V1 - I built a SS316L coil in the RBA section of the Talos V1
iStick TC60W - I have the Melo RBA set up with a T1#1 coil
KBox 70 - My Subtank Mini is built with a Ti#1 coil
Ele Laisimo P70 - the Billow V2 has a set of Ti#1 coils... got to run duals a little cooler in this
Sigelei 75 - Currently not in TC mode...
eNVy 22 - The Goblin V1.2 fits in this device perfect, but is currently built with Kanthal
eVic VTC Mini - It's sporting the eGo ONE Mega with a Ti#1 coil in the CLR head
Treebox - Rocking the Charon with a dual 316L stainless build
XPRO M80 Plus - Let's not talk about this one and TC...
Cloupor GT - The Aromamizer V1 is on it with a non-TC build
Coolfire IV Plus TC100 - The El Diablo in black looks good on this and performs just as nicely with the dual 316L build in it
iStick TC100W - The Crius V3 is set up with a set of SS430 coils and running in a custom TCR range
iPV4S - This has a dual T1#1 build in the Mutation X MT RTA
KBox 120 - It's a black KBox and I paired it all matchy matchy with a blacked out Monster V3 sporting a single coil SS316L build. Great flavor.
Esige Eiffel T1 - The Zephyrus V2 is on it without a TC build
XCube II - I was playing around with the TFV4 and the TFR3 RBA head, so no TC here
Koopor Plus - The Gemini RTA has a dual SS430 build and is tuned using a custom TCR
Cuboid - I've paired this with the Griffin 22 and a set of 316L stainless coils
Reuleaux DNA200 - Sad to say I wanted raw seething power out of this one for use with the Boreas
iStick 200 is not here yet, but is inbound and I've built the Griffin 25 up with a set of 316L SS coils.
Reuleaux RX200 - And, to compare tanks, the Aromamizer Supreme on this one has the same build as the Boreas

Oh my goodness

 

[GemInEye]

Hopefully the contest isn't over. I have never used tc at all. I have devices capable of running it but im still getting kanthal and building down. I also noticed that it seems to be for subohm vapors and i dont go below. 85 ohms and im a mtl person.

Tapayappin

 

[AlmightyEvan]

Hopefully the contest isn't over. I have never used tc at all. I have devices capable of running it but im still getting kanthal and building down. I also noticed that it seems to be for subohm vapors and i dont go below. 85 ohms and im a mtl person.

Tapayappin

Hi, it is just started, feel free to enter

 

[Frostino]

3. If you are an experienced TC vaper, let us know what TC devices you have; If not, let us know which TC device is in your vape wish list


Right now I only have 2 eVic VT mods. One in yellow with the black stripe and one in black with the red stripe. Hopefully I will have 3 TC mods after this contest! lol

 

[Frostino]

4. To use a TC device, what kind of vape stuff you need, like the material of the wire, the rebuid tools, ohm reader, etc

kanthal, a ohms reader, some cotton, some juice and anything in my tool box that I might need to get the job done

 

[Frostino]

5. Do you know TCR (temperature coefficient of resistance) before? If you do, share the sheets of TCR you knew; If not, simply reply with “Not yet”

I understand the concept, but as of right now I have yet to dabble

 

[Vaping!!!Jables]

Question#3
I use tc alot. In fact I vape alot(regulatedtc,mech and power). When I TC,which is most of the time, I use my rx200(nickel and stainless Steel)Istick100(actually120)titanium,nickel and stainless Steel. I prefer stainless Steel on all my devices tc or power mode.

San Antonio,Texas

 

[Vaping!!!Jables]

Question#4
To use my TC devices I need stainless Steel 26 or 28 guage. I use a cooler with an I.d. of usually 2.5 or 3. Sometimes higher on my rda's. For a oh reader I'm embarrassed to say I don't have one I usually use one of my devices to read ohms(sig150,rx200 or Istick100)


San Antonio,Texas

 

[Boris bmp]

4. I'm have no ohm reader and I use my vape devices for measurements

 

[Vaping!!!Jables]

Question#5
I know what tcr values are but I've never used them. I've always used the stock tcr on my devices. Both of my TC devices have personal settings so you can adjust your tcr values but I haven't had to use them. The stock values have given me good temp control.

San Antonio,Texas

 

[Vaping!!!Jables]

QUESTION#1
I don't know any personally on here or their TC knowledge but @Vaping!!!Jables knows a lot about TC.

San Antonio,Texas

 

[Vaping!!!Jables]

QUESTION#2
@Vaping!!!Jables definitely kicks but at making coils (TC and contact,micro and macro)

San Antonio,Texas

 

[f1vefour]

QUESTION#2
@Vaping!!!Jables definitely kicks but at making coils (TC and contact,micro and macro)

San Antonio,Texas

Did you just refer to yourself in the fourth person[emoji14]

 

[Vaping!!!Jables]

Did you just refer to yourself in the fourth person[emoji14]

That I did I'm that best coil maker that I personally know.[emoji6]

San Antonio,Texas

 

[kevdt67]

3 i want this device! lol

 

[kevdt67]

5 not yet and SAY WHAT?