I am having a lot of trouble with squawking the feeder. I have tried a lot of different bottles and have replaced the gasket on top of the bottle.
Any help would be appreciated
Are you inverting the thing when you squeeze? Vmod does not have a tube that reaches the bottom of the bottle. Some have modded it to perform as such with a tube in the bottle, but stock form must be inverted to feed the well. I found that a quick pull without firing the atty helped to draw the liquid from the well into the atty/carto. I hope this helps!
I have upside down and let the 2 air bubbles float up. Then turn it right side up and squeeze. Either air or juice comes out the top of the bottle all over my hands :-(
My question would be, is the bottle screwed all the way into the unit. When the bottle is screwed in it should almost be flush with about a 1/16" gap to the top of the bottle. If it is in fact screwed in all the way, I would say you have a defective bottle that has ruptured at the base of the threads... In that case you will need to contact Vapage....
Hehe. You have to squeez very lightly while the thing is inverted, then give a quick pull with your mouth once it's right-side-up.
Sorry you're having trouble, but it seems to be operator error. It's acually possible to give a hard draw on it while it's inverted to prevent having to squeeze. This will feed your atty/carto, also. Nice for bed-vaping.
Hehe. You have to squeez very lightly while the thing is inverted, then give a quick pull with your mouth once it's right-side-up.
Sorry you're having trouble, but it seems to be operator error. It's acually possible to give a hard draw on it while it's inverted to prevent having to squeeze. This will feed your atty/carto, also. Nice for bed-vaping.
Having used a VMod and then Reo, I can't stand the whole concept of tipping to feed it. Especially with standard atomizers or cartomizers, where blind squonking can be so simple and effective.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.