Wacky E-Cig Ideas

Status
Not open for further replies.

Harry Crazington

Senior Member
ECF Veteran
Jan 13, 2009
223
2
78
Las Vegas
Chore boy Copper pads give off Copper oxide when heated which is Toxic. Although this doesn't stop crack heads from using it. You would be better off using stainless steel pads though. Just an FYI.

Good point, I was just going by what I Googled about it. I wanted stainless pads but didn't see any, still looking for em. I found some galvanized steel pads but they're also toxic when heated. I just wanted to see if it'd work at all, didn't inhale. Too hard to regulate heat with a lighter though, when ejuice gets too hot the propylene glycol & glycerin also give off toxic fumes, I've heard.
 

Vince1

Ultra Member
ECF Veteran
Feb 6, 2009
1,051
6
Down South, USA.
I'm thinking a stack of flat brass pipe screens might have potential, Like placed in the bowl of an I-inhale device. I just don't have the $250 to try one. They run on propane lighter fuel and heat without a flame.

http://www.vapornation.com/store/iinhale-p-495.html

Still, I think it gets a little to hot, like you say, causing it to "Burn" the Nicquid. That can't taste good. I hear it works well with tobacco leaf soaked in glycerine.
 
Last edited:

Lithium1330

Super Member
ECF Veteran
Nov 22, 2008
439
5
Mexico
I'm thinking a stack of flat brass pipe screens might have potential, Like placed in the bowl of an I-inhale device. I just don't have the $250 to try one. They run on propane lighter fuel and heat without a flame.

I-Inhale vaporizer | Cordless Vaporizer | Pocket size Portable Vaporizer | Popular Herbal Vaporizer | Vapornation

Still, I think it gets a little to hot, like you say, causing it to "Burn" the Nicquid. That can't taste good. I hear it works well with tobacco leaf soaked in glycerine.

No it dons't burn the e-liquid, the temp is 190C it is high but not that high, for some reason (maybe different e-liquids) some people have problems keeping the flavor of e-liquid for more than 2 minutes, but they are working on improvements and some people just can't stand the BIG hit throat and lintz69 said the flavor was always really strong, he is selling one right now here:

http://www.e-cigarette-forum.com/forum/classifieds-swaps/7111-i-inhale-sale.html

He uploaded a Video review of the device, you can see it in that post, the I-Inhale uses butane and have 2 years manufacturers warranty, looks very promising, Tim @ I-INHALE is developing an e-liquid suitable to use it on the i-inhale, he has some video reviews of the I-Inhale using tobacco soaked in glycerine, molassess+e-liquid, etc, people is getting more interested in this device it looks big on the official site and in fotos, but it actually is not that big, is like the size of an i-phone, hope you can get your hands on one of those soon :)
 

Deficit

Moved On
Mar 2, 2009
144
0
44
Vienna, Ohio
I think wireless power sources are on the drawing board somewhere, aren't they? We could then wander around vaping whilst drawing power directly from our domestic supply. Nice!

Yeah, they've been on the drawing board since the early 1900's when Nikola Tesla decided to build a tower that would supply free wireless electricity to the whole world - didn't go over too big with the big businesses and banks that were investing heavily at the time in the copper industry, as electricity was still so new they were mass mining copper and still trying to mass produce enough copper wire to power more than just the few major cities that even had electricity available at the time. No one would back Tesla financially on the project of building his tower because they had too much money tied up in copper wire, and he had no plans for how to meter the use and thus be able to bill people and make money back from it.

Too bad big business, one of the biggest offenders was J.P. Morgan, had to stop what could have been the greatest invention of all time because of their greed. Tesla's plans for how to build the tower and make it all work "mysteriously" disappeared after he died and the government raided the place where he had the plans for many of his device ideas stored. To this day the government keeps their mouth closed about what they confiscated, all of his research and paperwork is considered classified.
 

Deficit

Moved On
Mar 2, 2009
144
0
44
Vienna, Ohio
I also forgot to mention, when he was trying to sell the banks on the idea of backing him on the project, he was able to prove it would work by building a mini prototype of it, and he was able to light an incandescent light bulb wirelessly from over a mile away with it. Mind you, this was the very very early 1900's as well when he accomplished this... I want to say circa 1910(?)

So he was able to prove it would work. The full tower would have been... I think it was 1,200 or 1,300 feet in length total, with 600 feet or so being underground and 600 or 650 feet high above ground. It would have had some kind of alloy rod running from the top all the way down through the center to the bottom underground, and it would generate electricity using the natural resonance (vibrations) of the earth and project said energy up into the ionosphere.

Very similar to how modern-day TV and radio broadcast transmitters work, only on a much larger scale and getting power from the earth's resonance.

Can you imagine it though? We would have no wires, no batteries, no electric bills...
 
Last edited:

Deficit

Moved On
Mar 2, 2009
144
0
44
Vienna, Ohio
ahh..

If you only knew. Those power lines overhead are letting out all kinds of free energy. Now if you could only get your e-cig to run off a EMF hmmm

Pilon Ambient Energy Lights Field of Florescent Bulbs

Very interesting! I've heard cases of people "stealing" electricity by simply running a heavy duty cable from their house up to the road and having an end of the cable exposed and sitting NEAR (not touching or even connected to) the power lines that run up along the street. Not sure exactly how much power will run through there though, would probably have to connect the wire to a step-up transformer of some kind in your house if you wanted to get any serious power out of it. Interesting nonetheless.
 

Brian

Full Member
Mar 8, 2009
19
0
52
Western Pennsylvania
What about using a zippo lighter? I am sure ppl would freak to see what looks like somebody huffing lighterfluid and exhaling smoke.... But i really like the asthma inhaler idea though... the exhaled vapor would be a great opportunity to mess with ppl.
1. after vaping, pretend to read aloud from inhaler "in the event of smoke, get to a safe distance, call 911...."
2. "what do you mean, i thought it was supposed to do that?"
3. " oh man, the leprechan said this would happen"
4. "dude, I think it needs a tune up"
5. scratching head and reading aloud from inhaler "expires 12/1/1976"
6. get a glazed look and state "dude....why is that unicorn staring at me"
The possibilities are endless
 

para-frame

Full Member
Verified Member
Mar 19, 2009
32
26
So Cal, USA
1. Replace LED with laser. Take a drag and it shoots the laser. Very practical. And dangerous to the eyes of those around you.

2. E-hookah- If you die of nicotine poisoning, we will refund you 100% of your purchase price!

3. Bluetooth- Allows you to do synchronize with your computer or palm pilot. We have absolutely no idea why you would want to do this other than being able to say that you did.

4. iPod jack- because everything else has one.

5. Built in vibrating function- Makes a great massager

Look for all these sometime around when hell freezes over in our online shop.

;)
been done.
e-cigarette-forum.com/forum/general-e-smoking-discussion/8967-e-hookah-coming-soon
 
Status
Not open for further replies.

Users who are viewing this thread