WANTS and NEEDS requests...

Status
Not open for further replies.

Justin25

Super Member
ECF Veteran
Verified Member
Jul 18, 2010
473
10
North Carolina
Not a problem.

Try cleaning your atties with rubbing alcohol (70% or higher). Drop them in and let them soak for 5-10 minutes. Then, take them out, holding them up-right with the open end up. And watch how it drains at the bottom. You're looking for a steady stream. If it's just dripping, submerge it in the alcohol again, pull it up, and let it drain. Do this a few times, and you should start to see a stream.

Wipe it off, tap it out, and put it in front of something that creates airflow - like a fan - to dry. When you can't smell the alcohol in the atty anymore, it's dry. In front of my window fan, this usually takes 1-2 hours.

This is how I've been doing it, and I find it works quite well.

To be honest, while I have tried a 510 that a friend had, I haven't spent a significant amount of time with one. So my perspective on 510's is very limited.

Also, I'm using 901 atties on my Kr8 batts, so it's running at 3.7v whereas the 901 batt runs at 3.3v.

So, the way I'm running it, I think it's pretty comparable to how I remember the 510. I think the flavor comes out a little more - but that may be the voltage I'm using it at. They are a bit leaky though, which is annoying.

But I prefer the flavor of my Kr8 cartos to both the 901 and the 510. It just feels richer and warmer to me. But, my Kr8 cartos also don't put out as much vapor at atties do. It's a trade-off. Over all... I still prefer cartos, though I do like my 901's.

ive tried to clean them with alcohol, ill try again and look for the stream but i dont know if thats the prob, maybe there blown, dont know! i appreciate the help.
 

Bahnzo

Unregistered Supplier
ECF Veteran
Jul 21, 2010
825
77
56
Colorado
ive tried to clean them with alcohol, ill try again and look for the stream but i dont know if thats the prob, maybe there blown, dont know! i appreciate the help.

I've switched to the method she recommends a few days ago and agree this works well. I've never really had a problem with getting bad tastes out of my atty's, but this works very well. Just make sure they are completely dry, and give them some careful dry burns to get rid of the gunk. What I do, is burn them, and if they have any smoke or vapor coming out of them, continue until they no longer have that. Just be careful, especially if you are using a 5v PV. I use my Riva and have no problem with burns, even with LR attys.
 

skydragon

ECF Guru
ECF Veteran
Verified Member
Oct 7, 2009
11,551
7,998
Mountain Cave
Looking to trade something for some BWb Honey Flue, Honey Nut Flue, or any sort of sweet tobacco possibly! I have lots of juices I could trade.

PM me! :D

Mike,

Has your want been met? If not I can put some Honey Flue 24 mgs in a different bottle for you. I don't have a lot left but you could could at least try some.
 

wphsmike

Super Member
ECF Veteran
Verified Member
May 31, 2010
807
26
Orlando, FL
Mike,

Has your want been met? If not I can put some Honey Flue 24 mgs in a different bottle for you. I don't have a lot left but you could could at least try some.

VpnDragon is going to send me some HFN! :D I tried the Honey Flue, but it was 12mg, so I think the mg was too low.

Save the bottles, no reason for hassle unless you want to real bad! :D
 
I got screwed out of 2 510 batteries, an atty, and a charger from another pif member. I could really use 510 parts if anyone has any to spare. I piffed all my extra stuff away in the PAY IT FORWARD thread :( so i have nothing to really trade except a 510 box mod passthrough right now. and maybe a little bit of halos menthol ice juice. thanks
Justin....Gemini posted a few days ago he was running late on PIFs due to personal issues.........

Click on your SN, it gives you the option to see your other posts. Tell me what YOU see?

You can take this as an attack, I take it more as an attack on Gemini who went out of his way to post he was having problems and running late with PIFs.


 

WitchWay

Ultra Member
ECF Veteran
Dec 30, 2009
1,297
0
Texas
Anyone have some spare 10440's laying around gathering dust? I could really use a couple. Trying to stay away from buying ANYTHING till I'm done moving so figured I'd give it a shot here :) Thanks !

mixit I have 10 used ones I rotated out of circulation recently. They are anywhere from 2 months to 5 months old and have been used in varying degrees in Lazer mods. They all hold a charge and work, but some may work better than others. There are 4 TrustFire and 6 AWs. I was going to offer them up on the treasure chest thread so they are yours if you want them. PM me your address.

Happy Vaping
 

mixitman

Super Member
ECF Veteran
Mar 19, 2010
628
1
VA
Thanks a ton WW!! PM sent :D

mixit I have 10 used ones I rotated out of circulation recently. They are anywhere from 2 months to 5 months old and have been used in varying degrees in Lazer mods. They all hold a charge and work, but some may work better than others. There are 4 TrustFire and 6 AWs. I was going to offer them up on the treasure chest thread so they are yours if you want them. PM me your address.

Happy Vaping
 
Status
Not open for further replies.

Users who are viewing this thread