Well I did it!

[Dirtay J]

Well it official I got the last Orange Reo Grand on its way to me, with a few extra things too. Really was hoping to get a dual color model(orange/black or Black/orange), but I dont have the patience to wait and hope one comes in stock. Also went and ordered a Kick right away for it to being that they were in stock over where they sell them. So with all that I got a question. Is the orange powder coated or anodized? Just asking because I know you have to remove the anno. or powder coat, to get the kick to get a ground and it was hard to tell from the picture. Mainly wondering because I know powder coat is a lot harder to remove than anno is.

Either way I am VERY excited to get it! Thanks one more time to everyone that posted in my last thread from yesterday. Really helped me make up my mind that I needed one of these. And I really would not be surprised if a VV Grand is in my near future once I get this one. I kind of have a feeling all my tube devices will be packed away(other than my Vmax and soon to come Zmax of course). Really haven't been this excited for a device in a long time!!

 

[nerak]

Congratz Reonaut!

You will love that Grand! I don't know about the finish. Can't tell for sure in those pics.

 

[MXBNW]

I think the Orange power coated.

 

[redeyedancer]

Welcome Dirtay J the orange is powder coated

 

[Dirtay J]

Welcome Dirtay J the orange is powder coated

damn that sucks, guess I'll have to break out the dremel. Maybe while I am at it I can clean off the door and paint it.

Or, Are the VV Grand and regular grand doors the same?

maybe I can make a Orange/Black Kicked grand and a Black/Orange VV Grand.

 

[Gioajack]

You don't need a Dremel to create a ground for the Kick, small piece of fine sandpaper, flexible sanding stick or even a woman's emory board is more than enough.


Jack

 

[Rhapsodies Fire]

You have some options...you don't need to take the powder coating off....

This is the whole thread: http://www.e-cigarette-forum.com/forum/reos-mods/238603-kicked-reo-grand-18490-a.html
This is the kicked 18490: http://www.e-cigarette-forum.com/forum/reos-mods/238603-kicked-reo-grand-18490-a-33.html#post6443042
This was done using wire: http://www.e-cigarette-forum.com/forum/reos-mods/238603-kicked-reo-grand-18490-a-29.html#post6123754
This was done using a strip: http://www.e-cigarette-forum.com/forum/reos-mods/238603-kicked-reo-grand-18490-a-26.html#post6011046 and http://www.e-cigarette-forum.com/forum/reos-mods/238603-kicked-reo-grand-18490-a-24.html#post5932170

 

[Dirtay J]

You don't need a Dremel to create a ground for the Kick, small piece of fine sandpaper, flexible sanding stick or even a woman's emory board is more than enough.


Jack

thats good to hear. With all the experiences I have had with poweder coat was the stuff was pretty thick and hard to get off. Either way I am excited for it to show up. Already got the shipping e-mail! Love it when places actually ship right away! so basically this is going to be one long weekend. Hopefully the Kick dont take too long to get here!

 

[pianoguy]

Let the mailman-stalking begin ;-)

 

[Dirtay J]

Let the mailman-stalking begin ;-)

so very very true. but lately I have been getting so much Vape mail. It seems like everyday something new is in the mail! been vaping since '09 but just recently got into advanced PV's. And I have gone crazy. All the Devices in my sig i got within the last month...lol( and that's not all I got either).....and more on the way!! Basically I look at vaping as a hobby. A cool hobby that ended a nasty habit!!! gotta love that!

 

[Dirtay J]

Thanks for the links. Finally have a chance to check them out.

You have some options...you don't need to take the powder coating off....

This is the whole thread: http://www.e-cigarette-forum.com/forum/reos-mods/238603-kicked-reo-grand-18490-a.html
This is the kicked 18490: http://www.e-cigarette-forum.com/forum/reos-mods/238603-kicked-reo-grand-18490-a-33.html#post6443042
This was done using wire: http://www.e-cigarette-forum.com/forum/reos-mods/238603-kicked-reo-grand-18490-a-29.html#post6123754
This was done using a strip: http://www.e-cigarette-forum.com/forum/reos-mods/238603-kicked-reo-grand-18490-a-26.html#post6011046 and http://www.e-cigarette-forum.com/forum/reos-mods/238603-kicked-reo-grand-18490-a-24.html#post5932170

 

[whatitstrue]

Congratulations and welcome!!!!!

This calls for a banana dance!!!!!

If this is your first bottom feeder your in for a treat! REOs are the best bar none!!!

Love to see a pic when it gets there

 

[Dirtay J]

Yeah this is my first bottom feeder. I even went out and got a variety of carts and attys to try out on it!

Forgot to mention: I had said I got the last orange one but really wanted a dual color, but all were out of stock. Well yesterday I got a email from Robert saying they were all out of orange. But had a black/orange if I wanted that instead. I couldn't believe it! Because that was the color combo I wanted in the first place! That alone made my day! Thanks again Robert.

Just got the shipping notification. Next week is going to be a good week! And depending on how today goes I may just order myself a VV Grand. Lol. Yeah might have to do that! Me ,and all the vendors I buy from, love my payday weekend! Lol lol

 

[Skeeter T]

It amaze me every time I see Rob go out of his way to satisfy a customer. He may be a man of few words, but his actions prove time and again that he backs up his product and service with integrity and desire to help. I'm constantly reminded that I made the right choice every time I buy a REO.