- Status
With the caveat that, afaik, none of our regulated mods go through actual calibration, without some extra metering equipment, no way to really know.
But it also seems that most of them are pretty close, so if you've set it at 13 watts, it's probably close to 13.
Actual numbers don't really matter. Just go to a setting that gives you the vape you want and call it good. If that setting on a different mod (same tank and build) gives you the same experience, then they're probably both pretty darn close to what they say
But it also seems that most of them are pretty close, so if you've set it at 13 watts, it's probably close to 13.
Actual numbers don't really matter. Just go to a setting that gives you the vape you want and call it good. If that setting on a different mod (same tank and build) gives you the same experience, then they're probably both pretty darn close to what they say
Are you refrerring to the old original Pico 75W mod or the newer Pico Plus? This is important to know!
It is my understanding that all the newer Picos with the USB-C ports have inferior chips on the PCB, do not have Boost/Step-up and cannot be firmware updated. The new models are completely different to the older models.
It is my understanding that all the newer Picos with the USB-C ports have inferior chips on the PCB, do not have Boost/Step-up and cannot be firmware updated. The new models are completely different to the older models.
Last edited:
@DavidOck, @UncleJunkle, thank you for the replies! 
I usually refer to steam-engine how is the optimal power for my build, cause I like hot vapor and that's why I'd like to know what's the maximum watts as a rule, but eventually I set them by testing in practice.
I have both, the original old Pico 75w with micro usb and the new Pico Plus.
The first is with Arctic Fox and is damn good.
The second is facelifted and I bought it only for its fine look. No AF possible
But I heard, that the chip is the same, the difference is the connector and if you put micro usb, AF is upgradeable, despite @UncleJunkle post.
Finally I will continue using the old and will keep the new as a spare one.
And won't believe the screen but the actual feeling while vaping.
Best regards and have a nice weekend
I usually refer to steam-engine how is the optimal power for my build, cause I like hot vapor and that's why I'd like to know what's the maximum watts as a rule, but eventually I set them by testing in practice.
I have both, the original old Pico 75w with micro usb and the new Pico Plus.
The first is with Arctic Fox and is damn good.
The second is facelifted and I bought it only for its fine look. No AF possible
But I heard, that the chip is the same, the difference is the connector and if you put micro usb, AF is upgradeable, despite @UncleJunkle post.
Finally I will continue using the old and will keep the new as a spare one.
And won't believe the screen but the actual feeling while vaping.
Best regards and have a nice weekend
Although I suspect the screen is pretty close. I find that the settings I use perform the same across all my mods, i.e. if I set the same watts on them, they all perform the same. And show coil resistance within, generally, a few hundredths of an ohm.
So, once you've dialed in your rig to where you want it, those settings might be fine on another mode - or at least a real close starting point
- Status
Similar threads
