What other items would you like EM to carry?

[crowbartool]

I'd like to see higher current batteries... the ones for my indulgence (the 3000mAh ones) just dont cut it, they take like 5 seconds to get a cartomizer warmed up to make vape. The same cartomizer on my *cough* Riva Clone *cough* heat up instantly. Running at 6v with HV atomizer seems pretty good (pretty much the only way I use the Indulgence atm), but higher drain 3.7 batteries would be nice as I really prefer the cartomizers. Oh and about the 510 cartomizers.... the ones I got recently have all the end caps glued on which sux cuz i like to use them with a drip tip attached.. would be nice to order some without the end caps glued so i dont cut my hand off removing them with an exacto knife.

Love the new weekly specials btw

edit: maybe it's just me but i cant find any low discharge 18650's searching around on google... so why do my batteries seem like they suck?

edit: ok tried these batteries again after stretching out my spring a bit and they seem allot better

 

[Di]

I'd like to see higher current batteries... the ones for my indulgence (the 3000mAh ones) just dont cut it, they take like 5 seconds to get a cartomizer warmed up to make vape. The same cartomizer on my *cough* Riva Clone *cough* heat up instantly. Running at 6v with HV atomizer seems pretty good (pretty much the only way I use the Indulgence atm), but higher drain 3.7 batteries would be nice as I really prefer the cartomizers. Oh and about the 510 cartomizers.... the ones I got recently have all the end caps glued on which sux cuz i like to use them with a drip tip attached.. would be nice to order some without the end caps glued so i dont cut my hand off removing them with an exacto knife.

Love the new weekly specials btw

well, yes,

everyone has their own favorite setup for different attys and catys.

I like Indulgence 18650 wit 801 atty, -- and with carty.

I like Indulgence passthru with these two even better

and i love the cartys with Indulgence passthru on 6Volts - wow wow - wow ------

I have tried cartys on the Riva and they are very good too

I have not tried the LR attys yet, soon I hope, --

and for the cartys, cut the end off with a pair of kitchen scissors -
thats what I use.
then insert a 901 mouthpiece, or a drip tip.

and refill the cartys using the push down into the condom method -
this method is soooooo cool.

 

[hidaho]

Working on it...............

Originally Posted by dskarpus
There are some new box mods floating around that feature a feed from a small bottle to the 510 cartomizer. Is Eastmall working on their own model?

I want to take my summer holidays in Eastmall factory

 

[Di]

edit: ok tried these batteries again after stretching out my spring a bit and they seem allot better

yes, the batteries have sometimes a small variance in size,

maybe only a mm or 2,

but it does make a huge difference in the connection

and therefore the vape quality--

if you think your battery is loose in the cup

please try stretching your spring a little bit,

it makes an amazing difference.

harder connection = better vape

 

[Di]

I want to take my summer holidays in Eastmall factory

I will send you photos of me there !!!!!!!

just to p--- you off !! hahahahahahhaahhaha

I will lay on the conveyor belt and float down amongst the Indulgence and RiVa parts -------



and for those who still do not believe Eastmall has our own factory and produce our own products !!!!!!!!!!

Look how hard this guy works, --

 

[gdogg]

These liquids for me
Pina Colada
Butter Rum
Du Marier (tobacco)
Players (tobacco)

 

[Di]

These liquids for me
Pina Colada
Butter Rum
Du Marier (tobacco)
Players (tobacco)

Tobacco concentrates flavors under testing at the moment is ----

marlboro
camel
RY4
Menthol

 

[Loghomeguy]

I second:
1) Drip tips in Delrin
2) Flavorings and cheaper mixers
3) Selection of AW batteries or the good trustfires cuz they'll be cheaper with the same performance
4) Holsters for all models

And also want to see:
4) Spacer magnets
5) Spare parts for Indulgence
6) Noalox
7) Adapters

I want the Obsession to have
1) AFS for sure
2) Lossless variable voltage 3.7-5 volts, pulse width modulation
3) Inductance charging stand
4) Direct plug in charging(no need to remove batteries and vape while charging)
5) Digital touch sensitive switch(durable and pocket safe)

That's all I can think of fro my wishlist currently

 

[gixer]

Has anyone suggested low resistance cartomizers? The ones with the removable cap. That would be swell.

 

[dskarpus]

Eastmall numnums

 

[bluesuede]

These are all really good suggestions. I have nothing to add!

I second:
1) Drip tips in Delrin
2) Flavorings and cheaper mixers
3) Selection of AW batteries or the good trustfires cuz they'll be cheaper with the same performance
4) Holsters for all models

And also want to see:
4) Spacer magnets
5) Spare parts for Indulgence
6) Noalox
7) Adapters

I want the Obsession to have
1) AFS for sure
2) Lossless variable voltage 3.7-5 volts, pulse width modulation
3) Inductance charging stand
4) Direct plug in charging(no need to remove batteries and vape while charging)
5) Digital touch sensitive switch(durable and pocket safe)

That's all I can think of fro my wishlist currently

 

[mwa102464]

The cap from the 510 carts works perfect to replace the removed cap on the carto, your 510 cartos work very well, I would like to see a carto that was much bigger and EM to come out with it, one that held say 5 ml's of jucie and maybe in reg & LR version that would work on Riva or an liquid delivery system for Riva but a carto holding 5 ml's would be super, David GET DESIGNING WITH YOU ENGINEER OK, HAHAHAH

 

[MusicBox]

How about a 510 carto with no end cap and a supply of 901 whistle-tips to fit.
and
Riva-style cones to fit the Indulgence.

 

[misterD]

I second:
1) Drip tips in Delrin
2) Flavorings and cheaper mixers
3) Selection of AW batteries or the good trustfires cuz they'll be cheaper with the same performance
4) Holsters for all models

And also want to see:
4) Spacer magnets
5) Spare parts for Indulgence
6) Noalox
7) Adapters

I want the Obsession to have
1) AFS for sure
2) Lossless variable voltage 3.7-5 volts, pulse width modulation
3) Inductance charging stand
4) Direct plug in charging(no need to remove batteries and vape while charging)
5) Digital touch sensitive switch(durable and pocket safe)

That's all I can think of fro my wishlist currently

 

[vapboy]

i want some battery connectors (so i can make some mods) and adopters

 

[gouki]

While searching for high drain aw batteries on the net i found this forum where this guy just sells aw batteries. So i did a test order and he is from HK with really fast shipping as i ordered on the 29th and it was in toronto customs on the 2nd. Maybe David can have a chat with him as he seems to be a supplier and can just order through David. Here is the link.

 

[Pheary]

No doubt the AW Batteries are a lot better than the ones from places like DealExtreme. Although I am not sure if the price difference for them will make much difference for vaping.

 

[slumgunner]

bring back black tea lol. and also drip tips and also some new flavors lol. got some blue berry and its been wonderful to vape lol

 

[Di]

i want some battery connectors (so i can make some mods) and adopters

I have a swag of old -- no good any more -- attys-

you could take the threads off them if you want them ??

I can do you a good deal----------

I will see if I can find some battery connectors- which ones do you want ??

 

[Di]

While searching for high drain aw batteries on the net i found this forum where this guy just sells aw batteries. So i did a test order and he is from HK with really fast shipping as i ordered on the 29th and it was in toronto customs on the 2nd. Maybe David can have a chat with him as he seems to be a supplier and can just order through David. Here is the link.

I dont even know what is a high drain aw battery?????????????