What will you recommend for my next upgrade?

[VapeLee]

hey fellow vapers!

Currently on iPV D2 with a SubTank Mini setup with a standby kayfun V2

Looking to buy another mod as an upgrade and also to be future-proof.

Will be getting the Aromamizer RDTA by SteamCrave.

Have actually shortlisted these mods:
Snow Wolf 200W
sigelei 150W TC
IPV 4S
Wismec Reuleaux RX200
iPV3 Li

Using this for daily vaping

 

[watervapour]

Choose one with firmware upgrade..

Dna 200 mod is also a good choice if you can get hold of one but try get one with changeable 18650 battery. It will be a problem if your mod built in lipo battery is dead.

 

[Steamer861]

+1 for the Aromamizer IMO don't like any thing on your short list Speaking from experience Lipo batteries are a BIG improvement! a 900 mAH lipo like the one found in a Vapor Shark charges twice as fast as an 18650 and last longer
You should be looking for a mod that does TC with all different wires like TI NI & SS, firmware upgradeable is a must!
Basically the best choice as of today is the DNA200. That said there are a lot of DNA200 mods out there, Do your home work and choose the one that best suites Your needs

 

[VapeLee]

@Steamer861 bro, Wismec Reuleaux RX200 is a DNA200 chip mod. Maybe I will consider that as one of my top choices! Thanks for your tips!

@watervapour thank you for your input!

 

[cloudysheep]

rx200 is not a dna chip....

 

[Darkangel]

@Steamer861 bro, Wismec Reuleaux RX200 is a DNA200 chip mod. Maybe I will consider that as one of my top choices! Thanks for your tips!

@watervapour thank you for your input!

Wismec has 2 variants, RX 200 and DNA 200
Cost wise, quite different. How can a DNA 200 price be so cheap?


Sent from Gotham City using Tapatalk

 

[VapeLee]

@cloudysheep & @Darkangel thanks for pointing that out!

Damn it need to hunt for DNA200 mods. Any other next best mods that you guys can recommend beside DNA200? Don't want to make a wasted trip to the vape shop

 

[cloudysheep]

You can try vt200, if your can find vs200 then go for it, boxer dna if that's your thing...

 

[Steamer861]

Vaporshark DNA 200

 

[Vapen00b]

i moved from the ipv4s to SW v1.5 200w and honestly I love the SW. I feel it has a better built but seems in Feb 2016 they are releasing V2 of SW.
SW V1 seems to suck though based on reviews.

 

[watervapour]

Yes

+1 for the Aromamizer IMO don't like any thing on your short list Speaking from experience Lipo batteries are a BIG improvement! a 900 mAH lipo like the one found in a Vapor Shark charges twice as fast as an 18650 and last longer
You should be looking for a mod that does TC with all different wires like TI NI & SS, firmware upgradeable is a must!
Basically the best choice as of today is the DNA200. That said there are a lot of DNA200 mods out there, Do your home work and choose the one that best suites Your needs

Yes bro, I strongly agree that lipo are better but 18650 are much more easier to get here. I don't want to do once the lipo battery in my mod expired.. Maybe get another new mod?

 

[WarA]

Yes


Yes bro, I strongly agree that lipo are better but 18650 are much more easier to get here. I don't want to do once the lipo battery in my mod expired.. Maybe get another new mod?

Actually lipo aren't that hard to get, lots of hobbies shop that sells them here. Issue is more of getting the maximum capacity that fits perfectly in the available space, often a times you have to downsize the capacity. (lipo are cheaper and less likely to vent as compared)

 

[watervapour]

Actually lipo aren't that hard to get, lots of hobbies shop that sells them here. Issue is more of getting the maximum capacity that fits perfectly in the available space, often a times you have to downsize the capacity. (lipo are cheaper and less likely to vent as compared)

Thanks bro, so to say I can bring my lipo battery to any hobbies shop and get something comparable? Will there be a problem later since it's not stock battery from factory??

 

[verycurious]

if you like your kayfun (tight draw) you'll hate aromomizer. it's not for mtl vapers. I tired it once, flavor, build quality is ok but it was too airy. imo taifun gt2 is still a great atomizer for flavor.

 

[WarA]

Thanks bro, so to say I can bring my lipo battery to any hobbies shop and get something comparable? Will there be a problem later since it's not stock battery from factory??

nope no issues, as long as connector fits its all good.

 

[VapeLee]

@verycurious what you do mean by mtl vapers? actually I felt my kayfun was very airy instead of a tight draw.

 

[VapGeek]

@verycurious what you do mean by mtl vapers? actually I felt my kayfun was very airy instead of a tight draw.

MTL - mouth to lung.

 

[Scarcliff]

I wouldnt say to definately go with the dna200. Worked my way up from a smok m80 to xcube2, and bought a spare d2. I like fiddling with my mods so I bought an efusion dna200.

The efusion dna200 has consistent firing. Love it from the day I bought it. Fast charging. I dont have to take out the battery and charge it. Just simply plug in with USB cable from your mobile charger. Vuala.

But recently my chip showed "Warranty Service". Contacted evolv and they said its out of calibration and told me to send the device to them and they will replace my chip. Sounds great right? Not so great when you know you aint getting it back due to some restriction reasons.

Now my dna200 is laying eggs. Thinking about getting the wismec rx200. The 3 18650 and price is quite a steal. Plus, upgradeable firmware. That is definately a must for me.

Tbh, if it werent for the dna chip failing on me, I wouldnt have thought of buying another mod.

 

[VapeLee]

thanks @VapGeek!

@Scarcliff this is one of the reasons why I'm a bit hesitant on DNA200. Went to mod shopping yesterday and the people were saying that DNA200 is quite complicated for more advanced users. Recommended me to get iPV 4s instead because YiHi chips are very stable.

Now dilemma because now running my new SteamCrave eats my battery on my D2 like crazy ! Can't even last half a day running at 30-35w.

Now my list just got shorter to Snow Wolf/iPV 4s/RX200.

Vaper pros, please kindly advice!

 

[watervapour]

In that case, my vote will be rx200.. Cos snow wolf no firmware update and ipv4s seem a bit outdated liao..