- Status
I myself am an all day every day iAtty user... I did use a DCT MAP Tank for about a week before I got my iAtty and once I figured out how to use my iAtty I was in the LOVE... 4.2v-3.7v AW IMR HD Batts with a 1.5ohm Nichrome Coil with Sterling Silver NR Wire and a XC-116 wick works perfectly... I may try SS Mesh one of these days for the fun of it... but thats just it in a nut shell the iAtty gives you complete freedom from the hassle and cost of pre-made attys and the expense of trying to find the atty that works best for you... when you can make your own at a cost of about .25 cents each the iAtty pays for itself quite quickly... then just like the UFS or AVS it is also an adjustable flow tank system if used with a GGTS... it is so easy to fill and holds quite a bit of juice... once you actually learn to use the iAtty and can configure everything correctly I have no juice ever in my mouth or the tip it does not leak even when held upside down or on its side for long periods of time... I have not ever used or even held a UFS or AVS and I wouldn't mind having one just to have one as the UFS is very pretty but not necessary for my needs... I prefer the freedom and ultimate flexibility the iAtty provides with a convenient tank system that doesn't leak... and combined with a SSGGTS its perfection my only purchasing needs running this set up are Juice, Wire, & Wick with juice being the most expensive consumable but is a cost you would incur with any PV on the market... the only thing that I can honestly say I am not fond of is the plastic pieces only because metal threads can chew up plastic threads real easy but is the same for UFS clear window... I have 1 spare of each plastic part at all times as well as the ceramic cup should I have a problem... So for whats it worth thats my page of jumbled thought on the topic but bottom line is find what works best for you to be free from the analog devils...
Last edited:
For me it's the iAtty on my GGTS @ 3.7v. Keep in mind that I am used to Genisis mods so the first thing I did with my iAtty after giving the fiberglass wick a try with the nickel NR wire and the nichrome resistance wire was to test all kings of everything in it.
I am currently finalized on pure silver NR wire with 32ga kanthal grade a-1 resistance wire. I make the wires using 1mmx1mm crimp tubes for my connections. I have gotten it down to a science so now I crimp one end completely and partially crimp the other to adjust my resistance. Then I attach aligator clips to the to my multimeter and pull the resistance wire through the partially crimped tube till I get the exat resistance I want (1.4 ohm). I make my wicks of #325 stainless mesh. The flavor, vapor and TH are all 10+ using a custom blended 50/50 24mg juice. Most of my friends have tried it and only a couple can actually handle it without choking immediately
Iv'e tried MAPS, AVS, UFS, CE2s, and box mods. My GGTS + iAtty are my all day every day devices. I get about 2 weeks per coil and have never had to replace a wick since converting to SS mesh. The XC-116 comes very close in terms of flavor and vapor, but is not as durable as the SS mesh and TH is noticeably less with it.
I am currently finalized on pure silver NR wire with 32ga kanthal grade a-1 resistance wire. I make the wires using 1mmx1mm crimp tubes for my connections. I have gotten it down to a science so now I crimp one end completely and partially crimp the other to adjust my resistance. Then I attach aligator clips to the to my multimeter and pull the resistance wire through the partially crimped tube till I get the exat resistance I want (1.4 ohm). I make my wicks of #325 stainless mesh. The flavor, vapor and TH are all 10+ using a custom blended 50/50 24mg juice. Most of my friends have tried it and only a couple can actually handle it without choking immediately
Iv'e tried MAPS, AVS, UFS, CE2s, and box mods. My GGTS + iAtty are my all day every day devices. I get about 2 weeks per coil and have never had to replace a wick since converting to SS mesh. The XC-116 comes very close in terms of flavor and vapor, but is not as durable as the SS mesh and TH is noticeably less with it.
Thanks to Mr. Wong, who decided to trade his iAtty for my AFSv2(allmods), I'm now in possession of a iAtty. Kind of distracted and preoccupied yesterday. Where is there a concise written guide as to how to assemble the wire, wick and unit? The wiki is still down....
Hi Clyde. congrats for your iAtty
http://www.e-cigarette-forum.com/forum/gg/199864-iatty-assembling-video.html
this thread was very helpful for building iAtty for me.
http://www.e-cigarette-forum.com/forum/gg/220458-my-current-iatty-coil-close-up.html
also close up picture that Rick was posting gave me good idea how it should look after build inside.
I am still learning GGTS and iAtty myself and just got DC MAP tank yesterday. so I dont have any good idea for juice set up yet. maybe someday when I figured out, I will post my opinion.
by the way I enjoyed your post about vape meeting in OKC.
I live in Tulsa area and Vapor Kings in Tulsa is hosting vape meeting on next month. I'm hoping to attend. maybe you can come along?
http://www.e-cigarette-forum.com/forum/gg/199864-iatty-assembling-video.html
this thread was very helpful for building iAtty for me.
http://www.e-cigarette-forum.com/forum/gg/220458-my-current-iatty-coil-close-up.html
also close up picture that Rick was posting gave me good idea how it should look after build inside.
I am still learning GGTS and iAtty myself and just got DC MAP tank yesterday. so I dont have any good idea for juice set up yet. maybe someday when I figured out, I will post my opinion.
by the way I enjoyed your post about vape meeting in OKC.
I live in Tulsa area and Vapor Kings in Tulsa is hosting vape meeting on next month. I'm hoping to attend. maybe you can come along?
At the moment I'm using a 1.5ohm Dual Coil in a notcigs prototype M1A1 tank @ 6v. It's a great vape, but I'm looking forward to the Iatty I've got coming.
Fav juice will be DK-Tab, RY4 and Strawberry from Dekang
EveryDay I Am Vaping !
EveryDay I Am Vaping !
Last edited:
Current setup will be TS with UFS, using 510 LR atty from totallywicked. The flavor and vapor is awesome. Before I got to use the UFS properly, it was always sitting around in my room. Till I pick a trick a 2 from painfreak' from ECF who is my buddy and he was heavily influenced by me when I started vaping. If you would look at his profile, he have nothing but GGs' now. Even the iAtty I got, I need to look for painfreak' to guide me along. Lol. Next Pv set up will be iAtty with SB set-up (soon it will be Stealth instead of SB when my Stealth arrived.) Having the same problem with many user that the stock wick will end up having burn taste in 1-2 days. iAtty using at 1.5, will try 6v ohm soon on my next wash up. Juices so far I only know about Dekang. Guys, Any Nice, Tasty, Economical and Vaporful' juice to recommend? Provide me with sites as well, thanks in advance.
EveryDay I Am Vaping !
EveryDay I Am Vaping !
Last edited:
Outstanding post. I've been trying to decide on a feeding system for a long time, long before i got my GG. I vape at 6-7v and do not like to drip. The tanks i've used so far leak, are a pain to fill, and all have given my juicemouth. I had decided my best alternative was dual coil cartomizers but i will try one of these for sure.
Wish me luck getting one. It took me weeks to find my GGTS but it was worth it.
Thanks MrK
Wish me luck getting one. It took me weeks to find my GGTS but it was worth it.
Thanks MrK
Vintage
I only use 2 juices. Ikenvape ry4 and Bobas. For me, they are the best
If you have problems with getting them to ship, send me a PM, I'll try to help
I only use 2 juices. Ikenvape ry4 and Bobas. For me, they are the best
If you have problems with getting them to ship, send me a PM, I'll try to help
Well, got some new stuff in today... some new LR atties for my UFS and some dual coil cartos to try out as well.
One UFS has the LR in it, worked fine the first few puffs, now it's flooded thanks to the atty coming out when I adjusted the juice... god that's annoying. Had a strange, almost menthol flavor though... when I'm using peanut butter cup in it.
Other UFS is now working quite well with the dual coil in it, same juice but flavor feels a little light but clean. Hits are pretty consistent, so looks like it's wicking well. I think this might be my set up now, one with iatty and one UFS with DC in it.
One UFS has the LR in it, worked fine the first few puffs, now it's flooded thanks to the atty coming out when I adjusted the juice... god that's annoying. Had a strange, almost menthol flavor though... when I'm using peanut butter cup in it.
Other UFS is now working quite well with the dual coil in it, same juice but flavor feels a little light but clean. Hits are pretty consistent, so looks like it's wicking well. I think this might be my set up now, one with iatty and one UFS with DC in it.
Okay I have a question. To start, I don't own a GG(well, not yet). I only have a Provari. I will be snatching up my very first UFS when they show up on CoV again. Here's the thing. I don't like low resistance atomizers. Moreso, I HATE cartomizers. I use mostly, a regular Joye 510 atomizer in the 2.5-2.8ohm range at around 5.5v (+/- .2v).
That all having been said, what atomizer would be suggested for me to use in the UFS? (Preferably not the HH.357. $20 for one atty is dumb)
Has anyone used the Vapage Hybrid Bottom Feeder in a UFS? Those were suggested to me earlier but I know little about them.
That all having been said, what atomizer would be suggested for me to use in the UFS? (Preferably not the HH.357. $20 for one atty is dumb)
Has anyone used the Vapage Hybrid Bottom Feeder in a UFS? Those were suggested to me earlier but I know little about them.
Last edited:
Not sure how the bottom feeder atty would work, but a SR Joye I've heard works just fine.
I too don't like carto's, but with the UFS the dual coil one seems to be working great and not giving me that nasty taste.
I too don't like carto's, but with the UFS the dual coil one seems to be working great and not giving me that nasty taste.
Meh, to me, the dual coils are the solution to a problem that doesn't exist. I can get just as much or more flavor and vapor out of a regular atomizer, and a regular atomizer doesn't put a 5-6 amp draw on my mod/batteries. I know...I'm a pain when it comes to my atomizers...
Oh while I am thinking of it, what about 306's? Anything impressive in that arena for the UFS? Still in the 2.5-2.8ohm range of course.
Last edited:
Bobas is made by Alien Visions. Truly different but great. The ry4 is lighter and I vape it in the morning. The Boba's is nice in the afternoon when I want something a bit sweeter.
Enjoy
Enjoy
That will be great, thank you.
Bobas, what flavour it belongs to?
Well, the person I traded the AFSv2 for the iatty called jinx and wanted to trade back, so I'm relenting. Truthfully, was still getting around to watching all the 
videos and putting it together when I received the request.
I love Imeo, but I'd really wish someone would watch the bulli smoker a2-t and watch the instructional video for that mod. THAT is an instructional video!
And the irony of ironies is that I'm actually enjoying dripping on my ss ggts! Getting good flavor and vape with a LR510 and AW IMD 18650, and the catch tank part of the draw control makes it easy and fool proof. I think it's been roughly a month since my new ggts, and it's just as rock solid dependable as ever despite HEAVY use.
Also a hell of a lot longer atty life with less maintenance doing this than my beloved bottom feeding juicing (3rd gen) mods. The bottom feeders use the air inlet holes to feed juice to the coil and wick, and I think eventually gums up their works and causes them to die prematurely. Lot less messy than refilling MAP tanks, too.
Unsure if I'll be more tempted by the iAtty or UFS (or whatever the hell the new one is called). Both have their strong suits, but still trying to decide which one would be better for me.
videos and putting it together when I received the request.I love Imeo, but I'd really wish someone would watch the bulli smoker a2-t and watch the instructional video for that mod. THAT is an instructional video!
And the irony of ironies is that I'm actually enjoying dripping on my ss ggts! Getting good flavor and vape with a LR510 and AW IMD 18650, and the catch tank part of the draw control makes it easy and fool proof. I think it's been roughly a month since my new ggts, and it's just as rock solid dependable as ever despite HEAVY use.
Also a hell of a lot longer atty life with less maintenance doing this than my beloved bottom feeding juicing (3rd gen) mods. The bottom feeders use the air inlet holes to feed juice to the coil and wick, and I think eventually gums up their works and causes them to die prematurely. Lot less messy than refilling MAP tanks, too.
Unsure if I'll be more tempted by the iAtty or UFS (or whatever the hell the new one is called). Both have their strong suits, but still trying to decide which one would be better for me.
I think the opossite is happening clyde, you make a mistake here about atomizers that get feeded from the air holes. As for my videos, be sure that I am not a professional on this. You have to ask Jen or Scott for a good video lol
Also I am very glad that you are totally satisfied with GGTS.
Also I am very glad that you are totally satisfied with GGTS.
I think the opossite is happening clyde, you make a mistake here about atomizers that get feeded from the air holes. As for my videos, be sure that I am not a professional on this. You have to ask Jen or Scott for a good video lol
Also I am very glad that you are totally satisfied with GGTS.
Thanks for the prompt reply. May not have been entirely clear from my post, but the bottom feeders referred to were other mods. I'm dripping on the ggts.
By the way, I'd like to ask you a quick question. How do I clean the inside of my good old AFSv2? Oxidation and juice have built up in it. Tried cleaning the inside of it with an old (but clean!) toothbrush and q-tips, but I was told it still looked kind of icky. I'm afraid of using cleansers and/or solvents on it since the inside will be touching juice. Any suggestions? Thanks in advance for your answer.
Counting down to the new 510 tank, whatever it's called. AVS? UFS? UVS? VHS?
- Status
