What's your favorite rta?

[thewomenfolk]

Okay you guys, where do I get a Goblin at the best price?

I finally built my Kayfun Lite after a year of having it. It's fantasitc in the flavor dept and the vapor is very good too. I'm vaping a 1.8 ohm coil at 15 W and am happy to see it's not hot or robbing me of juice. I'm vaping on my Clouper Mini's now....awesome awesome awesome little thing!

 

[dleister1981]

i have a lemo and a subtank mini, really close call here, but the subtank has the slightest more flavor

 

[zerosm0ke]

Just picked up a Goblin at Rocky Mountain Vapor for 25.50. Coupon code "FORUM"
First time I have used this vendor, so YMMV.

 

[dleister1981]

Just picked up a Goblin at Rocky Mountain Vapor for 25.50. Coupon code "FORUM"
First time I have used this vendor, so YMMV.

at 25.50 im going to have to grab one up

 

[ThunderDan]

Tough call, probably goblin right now, even though the QC is garbage, the vape is excellent. Also digging subtank mini rba and kf4 with ni200 builds.

Sent from my Nexus 6 using Tapatalk

 

[roxynoodle]

Tough call, probably goblin right now, even though the QC is garbage, the vape is excellent. Also digging subtank mini rba and kf4 with ni200 builds.

Sent from my Nexus 6 using Tapatalk

The QC is poor? I just got an Aga-t7 on Saturday and was quite impressed with the quality. That's too bad as I had put UD on my list for a manufacturer to watch.

 

[ThunderDan]

The QC is poor? I just got an Aga-t7 on Saturday and was quite impressed with the quality. That's too bad as I had put UD on my list for a manufacturer to watch.

Mine was kinda bad, but for a $25 RTA its fine. Crunchy threads on the chimney bit, the 510 center post is crooked so the entire tank is a bit lop sided, fill port screw leaks if not extremely careful, few other areas had burrs, etc. All of them have a janky fitting glass tank section.

Sent from my Nexus 6 using Tapatalk

 

[roxynoodle]

Mine was kinda bad, but for a $25 RTA its fine. Crunchy threads on the chimney bit, the 510 center post is crooked so the entire tank is a bit lop sided, fill port screw leaks if not extremely careful, few other areas had burrs, etc. All of them have a janky fitting glass tank section.

Sent from my Nexus 6 using Tapatalk

That is quite a few issues. I realize the demand is high, but the Chinese fail to realize that if they want consumers to continue buying their products, they need us to be satisfied.

 

[ThunderDan]

New favorite, gobfun, xD

 

[WattWick]

Kraken. It's the one atty that has never been out of daily rotation since I got it sometime back in 2013.

 

[duc916]

Goblin rapes everything in terms of flavour and this is my priority.

So I keep hearing, but then you can't use 24 gauge wire because of that wimpy build deck, so I know that can't be possible. Orchid for the win.

 

[drippaboi]

I only own one, an authentic SQuape R. I love it for its flavorful and versatile vape, extensive feature list, and Swiss craftsmanship. Honestly I love it so much I only glance at the plethora of RTAs releasing, what? weekly? .

Though I'll admit lately I've been wanting another tank to love just as much, and the Rose v2 is the current front runner. From the few ECF members I know for sure have both the Rose seems to be the winner, and I'm a little curious if anyone who does own both could share their thoughts about the SQR vs Rose v2, I'd appreciate it

Honestly the SQR only edged out the Rose in my original buying decision because A) I figured the emetal coating was going to be harder to clone than the Rose, B) the glass tank, and C) the ability to use my own drip tip.

 

[SkvLTD]

Still good old Foggers for me. Mini has been a true revelation for on-the-go w/ iTaste VV3, and the standard one slightly drilled out is perfect at home for that hassle-free, insane airflow non-stop cloud machine.

 

[SmoKnoMoCigZ]

my fav was kayfuns till i got the Sub Tank Mini.

 

[RickL]

I have a K fun and a Fogger v4. Neither of which will ever be my favorite. The main problem with both is that the coil leads have to be wrapped around the lead posts. With my arthritis this is getting to be very hard. I have a small Phoenix rda that is not to bad mainly because it has holes drilled in the lead posts. Much easier to do. For me, the other draw back with the Fogger is that it is dual coil. I like a cooler vape. When I wrap 2, 4ohm coils, it is a lot of a load and slow to heat. So I am looking for a 2 to 4 ml, single coil, RTA with holes drilled in the lead posts. Any suggestions would be appreciated. Of these two, I would prefer the k fun.

 

[javyn]

I was looking at a Rose V2 and Aqua V2 online to try out some new atties....but got nervous and just ordered 2 more Heron clones instead.

edit: No worries though, I have plenty of o-rings to service them all.

 

[BigEgo]

Taste -- KFL

Clouds -- Orchid clones.

Middle ground between both -- Subtank Mini

 

[roxynoodle]

I only own one, an authentic SQuape R. I love it for its flavorful and versatile vape, extensive feature list, and Swiss craftsmanship. Honestly I love it so much I only glance at the plethora of RTAs releasing, what? weekly? .

Though I'll admit lately I've been wanting another tank to love just as much, and the Rose v2 is the current front runner. From the few ECF members I know for sure have both the Rose seems to be the winner, and I'm a little curious if anyone who does own both could share their thoughts about the SQR vs Rose v2, I'd appreciate it

Honestly the SQR only edged out the Rose in my original buying decision because A) I figured the emetal coating was going to be harder to clone than the Rose, B) the glass tank, and C) the ability to use my own drip tip.

The Rose is a flavor monster and much more versatile. If you get one or two coils in it and finda way to run wick through all 4 slots, it will work, and work well.

 

[drippaboi]

The Rose is a flavor monster and much more versatile. If you get one or two coils in it and finda way to run wick through all 4 slots, it will work, and work well.

Thanks Roxy I'm always impressed with the flavor from the SQR so now you've got me really excited. After spending the last few days in the Rose v2 thread I decided to go ahead and give the Pallus clone a go. I'm looking forward to being able to experiment with different build styles using the Rose. Though I guess I should pick up some rayon as well?

 

[roxynoodle]

Thanks Roxy I'm always impressed with the flavor from the SQR so now you've got me really excited. After spending the last few days in the Rose v2 thread I decided to go ahead and give the Pallus clone a go. I'm looking forward to being able to experiment with different build styles using the Rose. Though I guess I should pick up some rayon as well?

I think it works best with rayon on horizontal builds.

Here is my build tutorial showing four builds:
http://www.e-cigarette-forum.com/fo...s-anthology-pictorial-builds-reviews-116.html